Xiaomi AX3200 RB01 - is there an official OpenWRT firmware?

Installing and Using OpenWrt
1

Hi All,

I read this: https://openwrt.org/toh/xiaomi/ax3200#installation. This meant for RB03 router.

Just wondering if there is an official OpenWrt firmware & installation page for RB01 (not RB03)

2

Apparently not, since it's not listed.

You could try reading Adding OpenWrt support for Xiaomi "Redmi Router AX6S"/"Xiaomi Router AX3200"

3

Alright thanks.

4 
1. Flash stock Xiaomi “closed beta” image labelled [miwifi_rb03_firmware_stable_1.2.7_closedbeta.bin](https://github.com/YangWang92/AX6S-unlock/raw/master/miwifi_rb03_firmware_stable_1.2.7.bin). (MD5: 5eedf1632ac97bb5a6bb072c08603ed7). Note: some devices come with telnet enabled from factory, [check here if you can skip this step](http://192.168.31.1/cgi-bin/luci/api/xqsystem/fac_info).

2. [Calculate telnet password](https://github.com/YangWang92/AX6S-unlock/raw/master/unlock_pwd.py) from serial number and login

3. Execute commands to prepare device

nvram set ssh_en=1 nvram set uart_en=1 nvram set boot_wait=on nvram set flag_boot_success=1 nvram set flag_try_sys1_failed=0 nvram set flag_try_sys2_failed=0 nvram commit

I am referring to step No.2, it says: Calculate Telnet Password, but I cannot see where is the step
for initializing Telnet, like Telnet 192.168.31.1

5

I think, it has to be done via the serial console

6

No it doesn't

7

Can someone help me with my xiaomi ax3200 rb01 for installed openwrt?

I can not enable telnet.

8

I won't be able to help you out because, until now, I had not installed OpenWrt. If you dig down further in the forum, there is currently a WiFi AX driver issue on the 5 GHz radio.