Xiaomi AX3000T, can't access luci interface

I installed openwrt snapshot with the guide on openwrt wiki.
But I can't connect to the internet and I can't access luci interface.

root@OpenWrt:~# netstat -anpt
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name    
tcp        0      0 127.0.0.1:53            0.0.0.0:*               LISTEN      2453/dnsmasq
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      1563/dropbear
tcp        0      0 192.168.1.1:53          0.0.0.0:*               LISTEN      2453/dnsmasq
tcp        0    196 192.168.1.1:22          192.168.1.198:43178     ESTABLISHED 2707/dropbear
tcp        0      0 ::1:53                  :::*                    LISTEN      2453/dnsmasq
tcp        0      0 :::22                   :::*                    LISTEN      1563/dropbear
tcp        0      0 fd17:3e8b:fc54::1:53    :::*                    LISTEN      2453/dnsmasq
tcp        0      0 fe80::46f7:70ff:fe17:ab0c:53 :::*                    LISTEN      2453/dnsmasq
tcp        0      0 fe80::46f7:70ff:fe17:ab0c:53 :::*                    LISTEN      2453/dnsmasq
root@OpenWrt:~# ubus call system board
{
	"kernel": "6.6.35",
	"hostname": "OpenWrt",
	"system": "ARMv8 Processor rev 4",
	"model": "Xiaomi Mi Router AX3000T",
	"board_name": "xiaomi,mi-router-ax3000t",
	"rootfs_type": "squashfs",
	"release": {
		"distribution": "OpenWrt",
		"version": "SNAPSHOT",
		"revision": "r26829-8ef4d78582",
		"target": "mediatek/filogic",
		"description": "OpenWrt SNAPSHOT r26829-8ef4d78582"
	}
}
root@OpenWrt:~# cat /etc/openwrt_release
DISTRIB_ID='OpenWrt'
DISTRIB_RELEASE='SNAPSHOT'
DISTRIB_REVISION='r26829-8ef4d78582'
DISTRIB_TARGET='mediatek/filogic'
DISTRIB_ARCH='aarch64_cortex-a53'
DISTRIB_DESCRIPTION='OpenWrt SNAPSHOT r26829-8ef4d78582'
DISTRIB_TAINTS=''
root@OpenWrt:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 00100000 00020000 "BL2"
mtd1: 00040000 00020000 "Nvram"
mtd2: 00040000 00020000 "Bdata"
mtd3: 00200000 00020000 "Factory"
mtd4: 00200000 00020000 "FIP"
mtd5: 00040000 00020000 "crash"
mtd6: 00040000 00020000 "crash_log"
mtd7: 00040000 00020000 "KF"
mtd8: 02200000 00020000 "ubi_kernel"
mtd9: 04e00000 00020000 "ubi"
root@OpenWrt:~# 



https://openwrt.org/releases/snapshot

https://firmware-selector.openwrt.org/?version=SNAPSHOT&target=mediatek%2Ffilogic&id=xiaomi_mi-router-ax3000t, click the tiny arrow, and then request build.
Make sure this is the right version of the ax3000t build.

Sysupgrade again, with the new sysupgrade image.

Thanks a lot. I am about 3 hours trying to solve it.
Best Regards,

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.