OK, so I took out the mSATA SSD, dd'ed the combined-squashfs image to it, put it back into the APU2 and ran sysupgrade. It lost its settings again. After that, I set up the configuration manually, thinking maybe there was something wrong with the configuration backup; unfortunately, just the same happens.
Seems the overlay is F2FS, but I'm not seeing any storage related error messages in dmesg
:
# dmesg
[ 0.000000] Linux version 4.14.60 (stijn@okeanos) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r6910+14-323285ac00)) #0 SMP Sat Aug 4 15:13:08 2018
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=5693b135-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[...]
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.000000] random: get_random_bytes called from 0xffffffff81cabb09 with crng_init=0
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 42 pages/cpu @ffff880077c00000 s131864 r8192 d31976 u524288
[ 0.000000] pcpu-alloc: s131864 r8192 d31976 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 483640
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz root=PARTUUID=5693b135-02 rootfstype=squashfs rootwait console=tty0 console=ttyS0,115200n8 noinitrd
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1916352K/1965360K available (8200K kernel code, 508K rwdata, 1288K rodata, 1048K init, 408K bss, 49008K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 4352, nr_irqs: 1000, preallocated irqs: 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] console [ttyS0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.010000] tsc: Detected 998.153 MHz processor
[ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.30 BogoMIPS (lpj=9981530)
[ 0.020007] pid_max: default: 32768 minimum: 301
[ 0.024669] ACPI: Core revision 20170728
[ 0.047592] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.050111] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.060044] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.067766] CPU: Physical Processor ID: 0
[ 0.070008] CPU: Processor Core ID: 0
[ 0.073729] mce: CPU supports 6 MCE banks
[ 0.080020] LVT offset 1 assigned for vector 0xf9
[ 0.084745] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.090020] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[ 0.096481] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.100005] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[ 0.107176] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[ 0.110427] Freeing SMP alternatives memory: 24K
[ 0.123712] smpboot: Max logical packages: 1
[ 0.130711] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.240000] smpboot: CPU0: AMD GX-412TC SOC (family: 0x16, model: 0x30, stepping: 0x1)
[ 0.240000] Performance Events: AMD PMU driver.
[ 0.240008] ... version: 0
[ 0.244024] ... bit width: 48
[ 0.250005] ... generic registers: 4
[ 0.254044] ... value mask: 0000ffffffffffff
[ 0.260005] ... max period: 00007fffffffffff
[ 0.265319] ... fixed-purpose events: 0
[ 0.269339] ... event mask: 000000000000000f
[ 0.270144] Hierarchical SRCU implementation.
[ 0.280073] smp: Bringing up secondary CPUs ...
[ 0.284962] x86: Booting SMP configuration:
[ 0.289151] .... node #0, CPUs: #1 #2 #3
[ 0.296358] smp: Brought up 1 node, 4 CPUs
[ 0.304125] smpboot: Total of 4 processors activated (7985.22 BogoMIPS)
[ 0.313204] reboot: PC Engines apu2 series board detected. Selecting PCI-method for reboots.
[ 0.320167] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.330048] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.340562] NET: Registered protocol family 16
[ 0.345987] cpuidle: using governor ladder
[ 0.352106] ACPI: bus type PCI registered
[ 0.356129] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.360257] PCI: Using configuration type 1 for base access
[ 0.365868] PCI: Using configuration type 1 for extended access
[ 0.383931] ACPI: Added _OSI(Module Device)
[ 0.388151] ACPI: Added _OSI(Processor Device)
[ 0.390010] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.394721] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.400543] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.427541] ACPI: Interpreter enabled
[ 0.430026] ACPI: (supports S0 S5)
[ 0.433438] ACPI: Using IOAPIC for interrupt routing
[ 0.438464] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.440498] ACPI: Enabled 7 GPEs in block 00 to 1F
[ 0.465989] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.470049] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI]
[ 0.477226] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
[ 0.480225] acpi PNP0A08:00: host bridge window expanded to [io 0x0000-0x0cf7 window]; [io 0x03b0-0x03df window] ignored
[ 0.490334] PCI host bridge to bus 0000:00
[ 0.494491] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.500010] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.506846] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.510009] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.520008] pci_bus 0000:00: root bus resource [mem 0x7f000000-0xffffffff]
[ 0.526922] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.530028] pci 0000:00:00.0: [1022:1566] type 00 class 0x060000
[ 0.530530] pci 0000:00:02.0: [1022:156b] type 00 class 0x060000
[ 0.530893] pci 0000:00:02.2: [1022:1439] type 01 class 0x060400
[ 0.531038] pci 0000:00:02.2: enabling Extended Tags
[ 0.540136] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[ 0.540498] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400
[ 0.540641] pci 0000:00:02.3: enabling Extended Tags
[ 0.545735] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
[ 0.546091] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400
[ 0.546182] pci 0000:00:02.4: enabling Extended Tags
[ 0.550133] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold
[ 0.550472] pci 0000:00:08.0: [1022:1537] type 00 class 0x108000
[ 0.550505] pci 0000:00:08.0: reg 0x10: [mem 0xfeb00000-0xfeb1ffff 64bit pref]
[ 0.550544] pci 0000:00:08.0: reg 0x18: [mem 0xfe900000-0xfe9fffff]
[ 0.550557] pci 0000:00:08.0: reg 0x1c: [mem 0xfeb24000-0xfeb24fff]
[ 0.550570] pci 0000:00:08.0: reg 0x20: [mem 0xfea00000-0xfeafffff]
[ 0.550582] pci 0000:00:08.0: reg 0x24: [mem 0xfeb20000-0xfeb21fff]
[ 0.550935] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[ 0.551007] pci 0000:00:10.0: reg 0x10: [mem 0xfeb22000-0xfeb23fff 64bit]
[ 0.551175] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.551468] pci 0000:00:11.0: [1022:7800] type 00 class 0x01018f
[ 0.551500] pci 0000:00:11.0: reg 0x10: [io 0x4010-0x4017]
[ 0.551515] pci 0000:00:11.0: reg 0x14: [io 0x4020-0x4023]
[ 0.551530] pci 0000:00:11.0: reg 0x18: [io 0x4018-0x401f]
[ 0.551545] pci 0000:00:11.0: reg 0x1c: [io 0x4024-0x4027]
[ 0.551559] pci 0000:00:11.0: reg 0x20: [io 0x4000-0x400f]
[ 0.551575] pci 0000:00:11.0: reg 0x24: [mem 0xfeb25000-0xfeb253ff]
[ 0.551639] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.556603] pci 0000:00:11.0: PME# supported from D3hot
[ 0.556864] pci 0000:00:13.0: [1022:7808] type 00 class 0x0c0320
[ 0.556896] pci 0000:00:13.0: reg 0x10: [mem 0xfeb25400-0xfeb254ff]
[ 0.557033] pci 0000:00:13.0: supports D1 D2
[ 0.557038] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.557286] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.557672] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.560102] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501
[ 0.560162] pci 0000:00:14.7: reg 0x10: [mem 0xfeb25500-0xfeb255ff 64bit]
[ 0.560555] pci 0000:00:18.0: [1022:1580] type 00 class 0x060000
[ 0.560881] pci 0000:00:18.1: [1022:1581] type 00 class 0x060000
[ 0.561170] pci 0000:00:18.2: [1022:1582] type 00 class 0x060000
[ 0.561436] pci 0000:00:18.3: [1022:1583] type 00 class 0x060000
[ 0.561706] pci 0000:00:18.4: [1022:1584] type 00 class 0x060000
[ 0.561967] pci 0000:00:18.5: [1022:1585] type 00 class 0x060000
[ 0.562469] pci 0000:01:00.0: [8086:1539] type 00 class 0x020000
[ 0.562521] pci 0000:01:00.0: reg 0x10: [mem 0xfe600000-0xfe61ffff]
[ 0.562584] pci 0000:01:00.0: reg 0x18: [io 0x1000-0x101f]
[ 0.562633] pci 0000:01:00.0: reg 0x1c: [mem 0xfe620000-0xfe623fff]
[ 0.562918] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.563071] pci 0000:00:02.2: PCI bridge to [bus 01]
[ 0.568057] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff]
[ 0.568065] pci 0000:00:02.2: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.568256] pci 0000:02:00.0: [8086:1539] type 00 class 0x020000
[ 0.568334] pci 0000:02:00.0: reg 0x10: [mem 0xfe700000-0xfe71ffff]
[ 0.568370] pci 0000:02:00.0: reg 0x18: [io 0x2000-0x201f]
[ 0.568405] pci 0000:02:00.0: reg 0x1c: [mem 0xfe720000-0xfe723fff]
[ 0.568593] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.568797] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 0.570043] pci 0000:00:02.3: bridge window [io 0x2000-0x2fff]
[ 0.570051] pci 0000:00:02.3: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.570243] pci 0000:03:00.0: [8086:1539] type 00 class 0x020000
[ 0.570319] pci 0000:03:00.0: reg 0x10: [mem 0xfe800000-0xfe81ffff]
[ 0.570383] pci 0000:03:00.0: reg 0x18: [io 0x3000-0x301f]
[ 0.570404] pci 0000:03:00.0: reg 0x1c: [mem 0xfe820000-0xfe823fff]
[ 0.570659] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.570838] pci 0000:00:02.4: PCI bridge to [bus 03]
[ 0.575845] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
[ 0.575866] pci 0000:00:02.4: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.575908] pci_bus 0000:00: on NUMA node 0
[ 0.580595] ACPI: PCI Interrupt Link [INTA] (IRQs *3 5 7 10 11 12 15)
[ 0.587275] ACPI: PCI Interrupt Link [INTB] (IRQs *3 5 7 10 11 12 15)
[ 0.590243] ACPI: PCI Interrupt Link [INTC] (IRQs 3 *5 7 10 11 12 15)
[ 0.600270] ACPI: PCI Interrupt Link [INTD] (IRQs 3 5 *7 10 11 12 15)
[ 0.606945] ACPI: PCI Interrupt Link [INTE] (IRQs 3 5 7 10 *11 12 15)
[ 0.610274] ACPI: PCI Interrupt Link [INTF] (IRQs 3 5 7 *10 11 12 15)
[ 0.621101] SCSI subsystem initialized
[ 0.625009] libata version 3.00 loaded.
[ 0.625023] ACPI: bus type USB registered
[ 0.629168] usbcore: registered new interface driver usbfs
[ 0.630079] usbcore: registered new interface driver hub
[ 0.640095] usbcore: registered new device driver usb
[ 0.645488] PCI: Using ACPI for IRQ routing
[ 0.650009] PCI: pci_cache_line_size set to 64 bytes
[ 0.650156] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.650161] e820: reserve RAM buffer [mem 0x77fae000-0x77ffffff]
[ 0.651112] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.656014] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.662169] clocksource: Switched to clocksource hpet
[ 0.667489] pnp: PnP ACPI init
[ 0.669125] system 00:00: [mem 0xfec10002-0xfec11001] has been reserved
[ 0.675801] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.675921] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.676107] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.676584] pnp: PnP ACPI: found 3 devices
[ 0.689931] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.698931] pci 0000:00:02.2: PCI bridge to [bus 01]
[ 0.703925] pci 0000:00:02.2: bridge window [io 0x1000-0x1fff]
[ 0.710061] pci 0000:00:02.2: bridge window [mem 0xfe600000-0xfe6fffff]
[ 0.716880] pci 0000:00:02.3: PCI bridge to [bus 02]
[ 0.721885] pci 0000:00:02.3: bridge window [io 0x2000-0x2fff]
[ 0.727987] pci 0000:00:02.3: bridge window [mem 0xfe700000-0xfe7fffff]
[ 0.734806] pci 0000:00:02.4: PCI bridge to [bus 03]
[ 0.739807] pci 0000:00:02.4: bridge window [io 0x3000-0x3fff]
[ 0.745945] pci 0000:00:02.4: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.752810] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.752816] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.752822] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.752827] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[ 0.752832] pci_bus 0000:00: resource 8 [mem 0x7f000000-0xffffffff]
[ 0.752838] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.752844] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe6fffff]
[ 0.752849] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.752854] pci_bus 0000:02: resource 1 [mem 0xfe700000-0xfe7fffff]
[ 0.752860] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.752865] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.753064] NET: Registered protocol family 2
[ 0.758015] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.765366] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.772196] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.778899] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.784978] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.791619] NET: Registered protocol family 1
[ 0.797097] pci 0000:00:13.0: PME# does not work under D3, disabling it
[ 0.803850] PCI: CLS 64 bytes, default 64
[ 0.804078] Unpacking initramfs...
[ 0.807845] Freeing initrd memory: 28K
[ 0.812044] amd_uncore: AMD NB counters detected
[ 0.816691] amd_uncore: AMD LLC counters detected
[ 0.821797] LVT offset 0 assigned for vector 0x400
[ 0.826712] perf: AMD IBS detected (0x000000ff)
[ 0.834264] workingset: timestamp_bits=62 max_order=19 bucket_order=0
[ 0.845491] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.853125] io scheduler noop registered
[ 0.857062] io scheduler deadline registered (default)
[ 0.862733] gpio_it87: no device
[ 0.867425] hv_vmbus: registering driver hv_pci
[ 0.872074] hv_vmbus: registering driver hyperv_fb
[ 0.877202] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.885673] ACPI: Power Button [PWRB]
[ 0.889581] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.897081] ACPI: Power Button [PWRF]
[ 0.903336] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.930616] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.958988] serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 0.967428] Non-volatile memory driver v1.3
[ 0.976252] loop: module loaded
[ 0.979549] Guest personality initialized and is inactive
[ 0.985110] VMCI host device registered (name=vmci, major=10, minor=63)
[ 0.991800] Initialized host personality
[ 0.996109] VMware PVSCSI driver - version 1.0.7.0-k
[ 1.001173] hv_vmbus: registering driver hv_storvsc
[ 1.006238] ahci 0000:00:11.0: version 3.0
[ 1.006855] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.015031] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
[ 1.024595] scsi host0: ahci
[ 1.027889] scsi host1: ahci
[ 1.031116] ata1: SATA max UDMA/133 abar m1024@0xfeb25000 port 0xfeb25100 irq 19
[ 1.038527] ata2: SATA max UDMA/133 abar m1024@0xfeb25000 port 0xfeb25180 irq 19
[ 1.046694] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
[ 1.053280] hv_vmbus: registering driver hv_netvsc
[ 1.058081] Fusion MPT base driver 3.04.20
[ 1.062194] Copyright (c) 1999-2008 LSI Corporation
[ 1.067115] Fusion MPT SPI Host driver 3.04.20
[ 1.071630] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.078175] ehci-pci: EHCI PCI platform driver
[ 1.083005] ehci-pci 0000:00:13.0: EHCI Host Controller
[ 1.088287] ehci-pci 0000:00:13.0: new USB bus registered, assigned bus number 1
[ 1.095727] ehci-pci 0000:00:13.0: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.104453] ehci-pci 0000:00:13.0: debug port 2
[ 1.109112] ehci-pci 0000:00:13.0: irq 18, io mem 0xfeb25400
[ 1.140049] ehci-pci 0000:00:13.0: USB 2.0 started, EHCI 1.00
[ 1.146582] hub 1-0:1.0: USB hub found
[ 1.150406] hub 1-0:1.0: 2 ports detected
[ 1.155001] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.161288] ohci-pci: OHCI PCI platform driver
[ 1.165798] ohci-platform: OHCI generic platform driver
[ 1.171336] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.176596] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.184368] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410
[ 1.193820] hub 2-0:1.0: USB hub found
[ 1.197620] hub 2-0:1.0: 2 ports detected
[ 1.202201] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.207446] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[ 1.214903] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
[ 1.221408] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.230168] hub 3-0:1.0: USB hub found
[ 1.234041] hub 3-0:1.0: 2 ports detected
[ 1.238805] usbcore: registered new interface driver usb-storage
[ 1.244983] i8042: PNP: No PS/2 controller found.
[ 1.249755] hv_vmbus: registering driver hyperv_keyboard
[ 1.255270] rtc_cmos 00:01: RTC can wake from S4
[ 1.260156] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.266296] rtc_cmos 00:01: alarms up to one day, 114 bytes nvram, hpet irqs
[ 1.274022] sdhci: Secure Digital Host Controller Interface driver
[ 1.280225] sdhci: Copyright(c) Pierre Ossman
[ 1.284662] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
[ 1.292686] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA 64-bit
[ 1.299870] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.305417] hv_vmbus: registering driver hid_hyperv
[ 1.310449] usbcore: registered new interface driver usbhid
[ 1.316032] usbhid: USB HID core driver
[ 1.319886] hv_utils: Registering HyperV Utility Driver
[ 1.325143] hv_vmbus: registering driver hv_util
[ 1.329767] hv_vmbus: registering driver hv_balloon
[ 1.335414] NET: Registered protocol family 10
[ 1.340764] Segment Routing with IPv6
[ 1.344514] NET: Registered protocol family 17
[ 1.349033] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.362012] 8021q: 802.1Q VLAN Support v1.8
[ 1.366326] NET: Registered protocol family 40
[ 1.371931] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.371954] microcode: CPU0: patch_level=0x07030105
[ 1.371992] microcode: CPU1: patch_level=0x07030105
[ 1.378151] microcode: CPU2: patch_level=0x07030105
[ 1.378171] microcode: CPU3: patch_level=0x07030105
[ 1.378223] microcode: Microcode Update Driver: v2.2.
[ 1.378270] AVX version of gcm_enc/dec engaged.
[ 1.378271] AES CTR mode by8 optimization enabled
[ 1.381170] sched_clock: Marking stable (1380106465, 0)->(1505080630, -124974165)
[ 1.383123] rtc_cmos 00:01: setting system clock to 2018-08-05 12:56:57 UTC (1533473817)
[ 1.427883] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.433479] ata1.00: ATA-10: SATA SSD, S9FM02.5, max UDMA/133
[ 1.433574] acpi_cpufreq: overriding BIOS provided _PSD data
[ 1.444961] ata1.00: 31277232 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.452393] ata1.00: configured for UDMA/133
[ 1.457227] scsi 0:0:0:0: Direct-Access ATA SATA SSD 02.5 PQ: 0 ANSI: 5
[ 1.466794] sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 1.474549] sd 0:0:0:0: [sda] Write Protect is off
[ 1.479590] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.479678] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.490540] sda: sda1 sda2
[ 1.494554] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.501958] VFS: Mounted root (squashfs filesystem) readonly on device 8:2.
[ 1.513546] Freeing unused kernel memory: 1048K
[ 1.520074] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.560098] Write protecting the kernel read-only data: 12288k
[ 1.568817] Freeing unused kernel memory: 2024K
[ 1.584813] Freeing unused kernel memory: 760K
[ 1.730901] hub 1-1:1.0: USB hub found
[ 1.735001] hub 1-1:1.0: 4 ports detected
[ 1.896513] init: Console is alive
[ 1.910049] tsc: Refined TSC clocksource calibration: 998.114 MHz
[ 1.916462] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1cc642e9cf1, max_idle_ns: 881590508309 ns
[ 2.400116] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.482922] pps_core: LinuxPPS API ver. 1 registered
[ 2.488060] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 2.498374] PTP clock support registered
[ 2.503099] Button Hotplug driver version 0.4.1
[ 2.509460] gpio-nct5104d: Found nct5104d at 0x2e chip id 0xc452
[ 2.515789] gpio-nct5104d: platform_driver_register
[ 2.521504] gpio-nct5104d: Device added
[ 2.526159] ehci-platform: EHCI generic platform driver
[ 2.532358] leds-apu2: load APU2/LED GPIO driver module
[ 2.537977] leds-apu2: PCI Revision ID: 0x42
[ 2.542598] leds-apu2: APU2 GPIO/LED driver module loaded
[ 2.549376] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 2.556138] sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x780b, Revision ID: 0x42
[ 2.564274] sp5100_tco: Using 0xfeb00000 for watchdog MMIO address
[ 2.570868] sp5100_tco: Last reboot was not triggered by watchdog.
[ 2.577392] sp5100_tco: initialized (0xffffc9000006d000). heartbeat=60 sec (nowayout=0)
[ 2.587353] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.593464] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.603488] init: - preinit -
[ 2.945408] clocksource: Switched to clocksource tsc
[ 3.077303] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.164676] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.194649] random: jshn: uninitialized urandom read (4 bytes read)
[ 6.301966] urandom_read: 3 callbacks suppressed
[ 6.301971] random: jshn: uninitialized urandom read (4 bytes read)
[ 6.564037] F2FS-fs (loop0): Mounted with checkpoint version = 6786c005
[ 6.571856] mount_root: switching to f2fs overlay
[ 6.677159] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 6.688211] urandom-seed: Seeding with /etc/urandom.seed
[ 6.796501] procd: - early -
[ 7.464627] procd: - watchdog -
[ 7.468008] procd: - ubus -
[ 7.526265] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.533805] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.540630] random: ubusd: uninitialized urandom read (4 bytes read)
[ 7.547612] procd: - init -
[ 7.742560] kmodloader: loading kernel modules from /etc/modules.d/*
[ 7.758445] ccp 0000:00:08.0: BAR 0: can't reserve [mem 0xfeb00000-0xfeb1ffff 64bit pref]
[ 7.766931] ccp 0000:00:08.0: pcim_iomap_regions failed (-16)
[ 7.772883] ccp 0000:00:08.0: initialization failed
[ 7.777858] ccp: probe of 0000:00:08.0 failed with error -16
[ 8.371281] tun: Universal TUN/TAP device driver, 1.6
[ 9.202781] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 9.209866] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 9.382779] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 9.389775] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 9.626874] pps pps0: new PPS source ptp0
[ 9.630974] igb 0000:01:00.0: added PHC on eth0
[ 9.635538] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 9.642594] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:41:45:60
[ 9.650329] igb 0000:01:00.0: eth0: PBA No: FFFFFF-0FF
[ 9.655826] igb 0000:01:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
[ 9.894838] pps pps1: new PPS source ptp1
[ 9.898898] igb 0000:02:00.0: added PHC on eth1
[ 9.903494] igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 9.910481] igb 0000:02:00.0: eth1: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:41:45:61
[ 9.917777] igb 0000:02:00.0: eth1: PBA No: FFFFFF-0FF
[ 9.923319] igb 0000:02:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
[ 10.162101] pps pps2: new PPS source ptp2
[ 10.166146] igb 0000:03:00.0: added PHC on eth2
[ 10.170762] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 10.177694] igb 0000:03:00.0: eth2: (PCIe:2.5Gb/s:Width x1) 00:0d:b9:41:45:62
[ 10.185280] igb 0000:03:00.0: eth2: PBA No: FFFFFF-0FF
[ 10.190629] igb 0000:03:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
[ 10.461024] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 11.720932] Netfilter messages via NETLINK v0.30.
[ 11.801580] ip_set: protocol 6
[ 15.200778] i2c /dev entries driver
[ 15.370850] piix4_smbus 0000:00:14.0: SMBus base address index region 0xcd6 already in use!
[ 15.379235] piix4_smbus: probe of 0000:00:14.0 failed with error -16
[ 17.300747] u32 classifier
[ 17.303489] input device check on
[ 17.307163] Actions configured
[ 17.570760] Mirror/redirect action on
[ 17.975659] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 21.387579] arp_tables: arp_tables: (C) 2002 David S. Miller
[ 21.570900] Bridge firewalling registered
[ 21.691084] Ebtables v2.0 registered
[ 21.696996] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 22.318398] wireguard: WireGuard 0.0.20180718 loaded. See www.wireguard.com for information.
[ 22.327356] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 22.355622] xt_time: kernel timezone is -0000
[ 22.481431] usbcore: registered new interface driver cdc_ether
[ 22.933991] PPP generic driver version 2.4.2
[ 22.939396] NET: Registered protocol family 24
[ 22.945424] usbcore: registered new interface driver rndis_host
[ 23.150298] kmodloader: 1 module could not be probed
[ 23.155354] kmodloader: - ccp-crypto - 0
[ 27.587907] IPv6: ADDRCONF(NETDEV_UP): lo: link is not ready
[ 27.630365] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.637541] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 27.745724] 8021q: adding VLAN 0 to HW filter on device eth1
[ 27.753196] br-lan: port 1(eth1) entered blocking state
[ 27.758593] br-lan: port 1(eth1) entered disabled state
[ 27.764293] device eth1 entered promiscuous mode
[ 27.774152] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 27.835756] 8021q: adding VLAN 0 to HW filter on device eth2
[ 27.842926] br-lan: port 2(eth2) entered blocking state
[ 27.848510] br-lan: port 2(eth2) entered disabled state
[ 27.854591] device eth2 entered promiscuous mode
[ 27.917379] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.923561] 8021q: adding VLAN 0 to HW filter on device eth0
[ 30.770664] igb 0000:03:00.0 eth2: igb: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 30.790679] igb 0000:02:00.0 eth1: igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 30.900437] br-lan: port 2(eth2) entered blocking state
[ 30.900689] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 30.915404] br-lan: port 2(eth2) entered forwarding state
[ 30.921475] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 30.930326] br-lan: port 1(eth1) entered blocking state
[ 30.935770] br-lan: port 1(eth1) entered forwarding state
[ 33.111257] random: fast init done
[ 36.691776] pppoe-wan: renamed from ppp0
[ 93.616225] random: crng init done
And the partitions and file systems:
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/root squashfs 7424 7424 0 100% /rom
tmpfs tmpfs 960116 200 959916 0% /tmp
/dev/loop0 f2fs 246656 15644 161380 9% /overlay
overlayfs:/overlay overlay 246656 15644 161380 9% /
/dev/sda1 ext4 8048 3200 4688 41% /boot
/dev/sda1 ext4 8048 3200 4688 41% /boot
tmpfs tmpfs 512 0 512 0% /dev```