When I tried to add a 5GHZ network, it doesn't show up on my wifi list and it says wifi not associated.
Welcome.
Ideally you would need to provide more info such as firmware version, config files (e.g. /etc/config/network and /etc/config/wireless and often log files (e.g. from http://192.168.1.1/cgi-bin/luci/admin/status/syslog and http://192.168.1.1/cgi-bin/luci/admin/status/dmesg).
Could you confirm that the devices you are trying to connect from support 5 GHz? Also did you try to set the channel on the router manually?
.
Yes, my devices support 5GHZ. I have not tried to set the channel manually, and I will try that.
Didn't work.
OK, if you could supply this please:
By the way, as a new user, you will have limited number of posts you can send, so I advice that you avoid sending short posts when you can combine them in one longer post.
Syslog:
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000000] Booting Linux on physical CPU 0x0
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 0.000000] Linux version 4.14.95 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7627-753531d)) #0 SMP Mon Jan 28 08:54:32 2019
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000000] OF: fdt: Machine model: Linksys WRT32X
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000000] Memory policy: Data cache writealloc
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 0.000000] On node 0 totalpages: 131072
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 0.000000] free_area_init_node: node 0, pgdat c0931000, node_mem_map dfbf9000
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 0.000000] Normal zone: 1024 pages used for memmap
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 0.000000] Normal zone: 0 pages reserved
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 0.000000] Normal zone: 131072 pages, LIFO batch:31
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 0.000000] random: get_random_bytes called from 0xc08008d0 with crng_init=0
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000000] percpu: Embedded 12 pages/cpu @dfbd1000 s18956 r8192 d22004 u49152
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 0.000000] pcpu-alloc: s18956 r8192 d22004 u49152 alloc=12*4096
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 0.000000] pcpu-alloc: [0] 0 [0] 1
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock6
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 0.000000] Bootloader command line (ignored): console= root=/dev/mtdblock6
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000000] Memory: 510940K/524288K available (6144K kernel code, 198K rwdata, 812K rodata, 1024K init, 232K bss, 13348K reserved, 0K cma-reserved, 0K highmem)
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 0.000000] Virtual kernel memory layout:
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 0.000000] .text : 0xc0008000 - 0xc0700000 (7136 kB)
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 0.000000] .init : 0xc0800000 - 0xc0900000 (1024 kB)
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 0.000000] .data : 0xc0900000 - 0xc0931900 ( 199 kB)
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 0.000000] .bss : 0xc0931900 - 0xc096b9d8 ( 233 kB)
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000000] Hierarchical RCU implementation.
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000000] L2C-310 D prefetch enabled, offset 1 lines
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000006] sched_clock: 64 bits at 933MHz, resolution 1ns, wraps every 4398046511103ns
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000014] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x1ae5b571769, max_idle_ns: 881590513431 ns
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000026] Switching to timer-based delay loop, resolution 1ns
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000123] Ignoring duplicate/late registration of read_current_timer delay
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000129] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000243] Calibrating delay loop (skipped), value calculated using timer frequency.. 1866.00 BogoMIPS (lpj=9330000)
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000249] pid_max: default: 32768 minimum: 301
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000296] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000300] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000488] CPU: Testing write buffer coherency: ok
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000498] CPU0: Spectre v2: using BPIALL workaround
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000586] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000678] Setting up static identity map for 0x100000 - 0x100060
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000737] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000797] mvebu-pmsu: Initializing Power Management Service Unit
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000834] Hierarchical SRCU implementation.
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.000984] smp: Bringing up secondary CPUs ...
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.001082] Booting CPU 1
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.001219] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.001221] CPU1: Spectre v2: using BPIALL workaround
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.001258] smp: Brought up 1 node, 2 CPUs
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.001262] SMP: Total of 2 processors activated (3732.00 BogoMIPS).
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.001265] CPU: All CPU(s) started in SVC mode.
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.002502] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.002544] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.002550] futex hash table entries: 512 (order: 3, 32768 bytes)
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.002593] pinctrl core: initialized pinctrl subsystem
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.002873] NET: Registered protocol family 16
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.003291] DMA: preallocated 256 KiB pool for atomic coherent allocations
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.003865] cpuidle: using governor ladder
Sun Mar 24 19:22:32 2019 kern.warn kernel: [ 0.003980] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
Sun Mar 24 19:22:32 2019 kern.warn kernel: [ 0.003985] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.008866] reg-fixed-voltage usb3_1-vbus: could not find pctldev for node /soc/internal-regs/pinctrl@18000/usb3_1-vbus-pins, deferring probe
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 0.009014] SCSI subsystem initialized
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 0.009104] libata version 3.00 loaded.
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.009187] usbcore: registered new interface driver usbfs
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.009213] usbcore: registered new interface driver hub
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.009236] usbcore: registered new device driver usb
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.009731] clocksource: Switched to clocksource arm_global_timer
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.010050] NET: Registered protocol family 2
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.010297] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.010317] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.010345] TCP: Hash tables configured (established 4096 bind 4096)
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.010380] UDP hash table entries: 256 (order: 1, 8192 bytes)
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.010393] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.010453] NET: Registered protocol family 1
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 0.010465] PCI: CLS 0 bytes, default 64
Sun Mar 24 19:22:32 2019 kern.warn kernel: [ 0.011237] Crashlog allocated RAM at address 0x3f00000
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.011306] workingset: timestamp_bits=30 max_order=17 bucket_order=0
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.012679] squashfs: version 4.0 (2009/01/31) Phillip Lougher
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.012688] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.013727] io scheduler noop registered
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.013733] io scheduler deadline registered (default)
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.014112] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.014981] mvebu-pcie soc:pcie: PCI host bridge to bus 0000:00
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.014990] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.014995] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.015000] pci_bus 0000:00: root bus resource [bus 00-ff]
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 0.015014] pci 0000:00:01.0: [11ab:6820] type 01 class 0x060400
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 0.015086] pci 0000:00:02.0: [11ab:6820] type 01 class 0x060400
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.015148] PCI: bus0: Fast back to back transfers disabled
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.015154] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.015160] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 0.015203] pci 0000:01:00.0: [11ab:2b40] type 00 class 0x020000
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 0.015224] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x401fffff 64bit pref]
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 0.015234] pci 0000:01:00.0: reg 0x18: [mem 0x40200000-0x402fffff 64bit pref]
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 0.015293] pci 0000:01:00.0: supports D1 D2
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 0.015296] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.015345] PCI: bus1: Fast back to back transfers disabled
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 0.015351] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 0.015397] pci 0000:02:00.0: [11ab:2b40] type 00 class 0x020000
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 0.015424] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x421fffff 64bit pref]
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 0.015435] pci 0000:02:00.0: reg 0x18: [mem 0x42200000-0x422fffff 64bit pref]
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 0.015516] pci 0000:02:00.0: supports D1 D2
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 0.015519] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.015570] PCI: bus2: Fast back to back transfers disabled
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 0.015576] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.015591] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe02fffff]
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.015596] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0400000-0xe06fffff]
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.015602] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe01fffff 64bit pref]
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.015612] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0200000-0xe02fffff 64bit pref]
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.015620] pci 0000:00:01.0: PCI bridge to [bus 01]
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.015625] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe02fffff]
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.015632] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0400000-0xe05fffff 64bit pref]
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.015641] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0600000-0xe06fffff 64bit pref]
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.015650] pci 0000:00:02.0: PCI bridge to [bus 02]
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.015655] pci 0000:00:02.0: bridge window [mem 0xe0400000-0xe06fffff]
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 0.015848] mv_xor f1060800.xor: Marvell shared XOR driver
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.080129] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 0.080241] mv_xor f1060900.xor: Marvell shared XOR driver
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.140091] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.140237] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.140827] console [ttyS0] disabled
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.160894] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 22, base_baud = 12500000) is a 16550A
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.895860] console [ttyS0] enabled
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.900668] loop: module loaded
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.904087] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.913187] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.922305] scsi host0: ahci-mvebu
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.925837] scsi host1: ahci-mvebu
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.929308] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.937274] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41
Sun Mar 24 19:22:32 2019 kern.warn kernel: [ 0.945574] pxa3xx-nand f10d0000.flash: This platform can't do DMA on this device
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.953400] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.959790] nand: Macronix MX30LF2G18AC
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.963642] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.971255] pxa3xx-nand f10d0000.flash: ECC strength 16, ECC step size 2048
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.978489] Bad block table found at page 131008, version 0x01
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.984796] Bad block table found at page 130944, version 0x01
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 0.990886] nand_read_bbt: bad block at 0x000007060000
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 0.996132] 10 fixed-partitions partitions found on MTD device pxa3xx_nand-0
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.003218] Creating 10 MTD partitions on "pxa3xx_nand-0":
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.008727] 0x000000000000-0x000000200000 : "u-boot"
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.013920] 0x000000200000-0x000000220000 : "u_env"
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.018981] 0x000000220000-0x000000260000 : "s_env"
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.024042] 0x000000260000-0x000000820000 : "unused_area"
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.029626] 0x0000007e0000-0x000000820000 : "devinfo"
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.034865] 0x000000900000-0x000008400000 : "kernel1"
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.040322] 0x000000c00000-0x000008400000 : "ubi"
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.045424] 0x000008400000-0x00000ff00000 : "kernel2"
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.050888] 0x000008700000-0x00000ff00000 : "rootfs2"
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.056337] 0x00000ff00000-0x000010000000 : "BBT"
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.061503] libphy: Fixed MDIO Bus: probed
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.065883] libphy: orion_mdio_bus: probed
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.070155] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.078767] mvneta f1070000.ethernet eth0: Using hardware mac address 60:38:e0:d0:9f:f0
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.087957] mvneta f1034000.ethernet eth1: Using hardware mac address 60:38:e0:d0:9f:f0
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.096142] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.102705] ehci-pci: EHCI PCI platform driver
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.107189] ehci-platform: EHCI generic platform driver
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.112498] ehci-orion: EHCI orion driver
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.116598] orion-ehci f1058000.usb: EHCI Host Controller
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.122035] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.129675] orion-ehci f1058000.usb: irq 38, io mem 0xf1058000
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.159724] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.165859] hub 1-0:1.0: USB hub found
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.169635] hub 1-0:1.0: 1 port detected
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.173965] usbcore: registered new interface driver usb-storage
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.180149] i2c /dev entries driver
Sun Mar 24 19:22:32 2019 kern.warn kernel: [ 1.194884] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.207288] orion_wdt: Initial timeout 171 sec
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.211970] sdhci: Secure Digital Host Controller Interface driver
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.218177] sdhci: Copyright(c) Pierre Ossman
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.270944] ata1: SATA link down (SStatus 0 SControl 300)
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.276394] ata2: SATA link down (SStatus 0 SControl 300)
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.279746] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.289323] sdhci-pltfm: SDHCI platform and OF driver helper
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.301070] marvell-cesa f1090000.crypto: CESA device successfully registered
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.308598] NET: Registered protocol family 10
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.313456] Segment Routing with IPv6
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.317169] NET: Registered protocol family 17
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.321655] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.334771] 8021q: 802.1Q VLAN Support v1.8
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.339003] Registering SWP/SWPB emulation handler
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.345191] xhci-hcd f10f8000.usb3: xHCI Host Controller
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.350594] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.358166] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.367454] xhci-hcd f10f8000.usb3: irq 44, io mem 0xf10f8000
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.373439] hub 2-0:1.0: USB hub found
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.377230] hub 2-0:1.0: 1 port detected
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.381284] xhci-hcd f10f8000.usb3: xHCI Host Controller
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.386630] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.394159] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.400664] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.408950] hub 3-0:1.0: USB hub found
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.412744] hub 3-0:1.0: 1 port detected
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.417075] UBI: auto-attach mtd6
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.420434] ubi0: attaching mtd6
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.430895] random: fast init done
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.444624] mmc0: new high speed SDIO card at address 0001
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.860623] ubi0: scanning is finished
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.870115] ubi0: attached mtd6 (name "ubi", size 120 MiB)
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.875626] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.882536] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.889353] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.896347] ubi0: good PEBs: 959, bad PEBs: 1, corrupted PEBs: 0
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.902382] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.909636] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1431149825
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.918810] ubi0: available PEBs: 0, total reserved PEBs: 959, PEBs reserved for bad PEB handling: 39
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.928076] ubi0: background thread "ubi_bgt0d" started, PID 706
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.934538] block ubiblock0_0: created from ubi0:0(rootfs)
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 1.940058] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.947228] mvsw61xx 10.mvsw61xx: Found MV88E6352 at f1072004.mdio-mii:10
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.954053] mvsw61xx 10.mvsw61xx: Using direct addressing
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.968359] hctosys: unable to open rtc device (rtc0)
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.975616] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 1.983262] Freeing unused kernel memory: 1024K
Sun Mar 24 19:22:32 2019 user.info kernel: [ 2.148070] init: Console is alive
Sun Mar 24 19:22:32 2019 user.info kernel: [ 2.151560] init: - watchdog -
Sun Mar 24 19:22:32 2019 user.info kernel: [ 2.409765] kmodloader: loading kernel modules from /etc/modules-boot.d/*
Sun Mar 24 19:22:32 2019 user.info kernel: [ 2.443388] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
Sun Mar 24 19:22:32 2019 user.info kernel: [ 2.451355] init: - preinit -
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 2.611262] mvneta f1070000.ethernet tmp0: renamed from eth0
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 2.617489] random: procd: uninitialized urandom read (4 bytes read)
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 2.660947] mvneta f1034000.ethernet eth0: renamed from eth1
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 2.710902] mvneta f1070000.ethernet eth1: renamed from tmp0
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 2.942431] random: jshn: uninitialized urandom read (4 bytes read)
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 2.973739] random: jshn: uninitialized urandom read (4 bytes read)
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 3.137488] mvneta f1034000.ethernet eth0: configuring for fixed/sgmii link mode
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 3.145285] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 3.151314] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 3.159206] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 6.213981] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 817
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 6.282069] random: crng init done
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 6.285487] random: 3 urandom warning(s) missed due to ratelimiting
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 6.295548] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 6.303422] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 6.313385] UBIFS (ubi0:1): FS size: 111738880 bytes (106 MiB, 880 LEBs), journal size 5586944 bytes (5 MiB, 44 LEBs)
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 6.324044] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
Sun Mar 24 19:22:32 2019 kern.notice kernel: [ 6.330691] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 25C30D1B-E0E3-41B7-A899-125CDEAC9F46, small LPT model
Sun Mar 24 19:22:32 2019 user.info kernel: [ 6.345398] mount_root: switching to ubifs overlay
Sun Mar 24 19:22:32 2019 user.warn kernel: [ 6.423347] urandom-seed: Seeding with /etc/urandom.seed
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 6.458057] mvneta f1034000.ethernet eth0: Link is Down
Sun Mar 24 19:22:32 2019 user.info kernel: [ 6.503602] procd: - early -
Sun Mar 24 19:22:32 2019 user.info kernel: [ 6.506518] procd: - watchdog -
Sun Mar 24 19:22:32 2019 user.info kernel: [ 7.104801] procd: - watchdog -
Sun Mar 24 19:22:32 2019 user.info kernel: [ 7.108034] procd: - ubus -
Sun Mar 24 19:22:32 2019 user.info kernel: [ 7.161737] procd: - init -
Sun Mar 24 19:22:32 2019 user.info kernel: [ 7.315719] kmodloader: loading kernel modules from /etc/modules.d/*
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 7.325311] ip6_tables: (C) 2000-2006 Netfilter Core Team
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 7.333342] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 7.341412] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 7.356975] <<Marvell Mac80211 Wireless PCIE Network Driver version 10.3.8.0-20181114>>
Sun Mar 24 19:22:32 2019 kern.info kernel: [ 7.365052] pci 0000:00:01.0: enabling device (0140 -> 0142)
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 7.370896] ieee80211 phy0: priv->pcmd_buf = ddd40000 priv->pphys_cmd_buf = 1dd40000
Sun Mar 24 19:22:32 2019 kern.debug kernel: [ 7.436533] ieee80211 phy0: fw download start
Cut some off since there are character limits
Kernel Log:
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.95 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7627-753531d)) #0 SMP Mon Jan 28 08:54:32 2019
[ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Linksys WRT32X
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat c0931000, node_mem_map dfbf9000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] random: get_random_bytes called from 0xc08008d0 with crng_init=0
[ 0.000000] percpu: Embedded 12 pages/cpu @dfbd1000 s18956 r8192 d22004 u49152
[ 0.000000] pcpu-alloc: s18956 r8192 d22004 u49152 alloc=12*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock6
[ 0.000000] Bootloader command line (ignored): console= root=/dev/mtdblock6
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 510940K/524288K available (6144K kernel code, 198K rwdata, 812K rodata, 1024K init, 232K bss, 13348K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0700000 (7136 kB)
[ 0.000000] .init : 0xc0800000 - 0xc0900000 (1024 kB)
[ 0.000000] .data : 0xc0900000 - 0xc0931900 ( 199 kB)
[ 0.000000] .bss : 0xc0931900 - 0xc096b9d8 ( 233 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 D prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[ 0.000006] sched_clock: 64 bits at 933MHz, resolution 1ns, wraps every 4398046511103ns
[ 0.000014] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0x1ae5b571769, max_idle_ns: 881590513431 ns
[ 0.000026] Switching to timer-based delay loop, resolution 1ns
[ 0.000123] Ignoring duplicate/late registration of read_current_timer delay
[ 0.000129] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[ 0.000243] Calibrating delay loop (skipped), value calculated using timer frequency.. 1866.00 BogoMIPS (lpj=9330000)
[ 0.000249] pid_max: default: 32768 minimum: 301
[ 0.000296] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000300] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000488] CPU: Testing write buffer coherency: ok
[ 0.000498] CPU0: Spectre v2: using BPIALL workaround
[ 0.000586] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.000678] Setting up static identity map for 0x100000 - 0x100060
[ 0.000737] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[ 0.000797] mvebu-pmsu: Initializing Power Management Service Unit
[ 0.000834] Hierarchical SRCU implementation.
[ 0.000984] smp: Bringing up secondary CPUs ...
[ 0.001082] Booting CPU 1
[ 0.001219] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.001221] CPU1: Spectre v2: using BPIALL workaround
[ 0.001258] smp: Brought up 1 node, 2 CPUs
[ 0.001262] SMP: Total of 2 processors activated (3732.00 BogoMIPS).
[ 0.001265] CPU: All CPU(s) started in SVC mode.
[ 0.002502] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.002544] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.002550] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.002593] pinctrl core: initialized pinctrl subsystem
[ 0.002873] NET: Registered protocol family 16
[ 0.003291] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.003865] cpuidle: using governor ladder
[ 0.003980] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[ 0.003985] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[ 0.008866] reg-fixed-voltage usb3_1-vbus: could not find pctldev for node /soc/internal-regs/pinctrl@18000/usb3_1-vbus-pins, deferring probe
[ 0.009014] SCSI subsystem initialized
[ 0.009104] libata version 3.00 loaded.
[ 0.009187] usbcore: registered new interface driver usbfs
[ 0.009213] usbcore: registered new interface driver hub
[ 0.009236] usbcore: registered new device driver usb
[ 0.009731] clocksource: Switched to clocksource arm_global_timer
[ 0.010050] NET: Registered protocol family 2
[ 0.010297] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.010317] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.010345] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.010380] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.010393] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.010453] NET: Registered protocol family 1
[ 0.010465] PCI: CLS 0 bytes, default 64
[ 0.011237] Crashlog allocated RAM at address 0x3f00000
[ 0.011306] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.012679] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.012688] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.013727] io scheduler noop registered
[ 0.013733] io scheduler deadline registered (default)
[ 0.014112] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[ 0.014981] mvebu-pcie soc:pcie: PCI host bridge to bus 0000:00
[ 0.014990] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
[ 0.014995] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[ 0.015000] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.015014] pci 0000:00:01.0: [11ab:6820] type 01 class 0x060400
[ 0.015086] pci 0000:00:02.0: [11ab:6820] type 01 class 0x060400
[ 0.015148] PCI: bus0: Fast back to back transfers disabled
[ 0.015154] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.015160] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.015203] pci 0000:01:00.0: [11ab:2b40] type 00 class 0x020000
[ 0.015224] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x401fffff 64bit pref]
[ 0.015234] pci 0000:01:00.0: reg 0x18: [mem 0x40200000-0x402fffff 64bit pref]
[ 0.015293] pci 0000:01:00.0: supports D1 D2
[ 0.015296] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.015345] PCI: bus1: Fast back to back transfers disabled
[ 0.015351] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.015397] pci 0000:02:00.0: [11ab:2b40] type 00 class 0x020000
[ 0.015424] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x421fffff 64bit pref]
[ 0.015435] pci 0000:02:00.0: reg 0x18: [mem 0x42200000-0x422fffff 64bit pref]
[ 0.015516] pci 0000:02:00.0: supports D1 D2
[ 0.015519] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.015570] PCI: bus2: Fast back to back transfers disabled
[ 0.015576] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 0.015591] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe02fffff]
[ 0.015596] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0400000-0xe06fffff]
[ 0.015602] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe01fffff 64bit pref]
[ 0.015612] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0200000-0xe02fffff 64bit pref]
[ 0.015620] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.015625] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe02fffff]
[ 0.015632] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0400000-0xe05fffff 64bit pref]
[ 0.015641] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0600000-0xe06fffff 64bit pref]
[ 0.015650] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.015655] pci 0000:00:02.0: bridge window [mem 0xe0400000-0xe06fffff]
[ 0.015848] mv_xor f1060800.xor: Marvell shared XOR driver
[ 0.080129] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.080241] mv_xor f1060900.xor: Marvell shared XOR driver
[ 0.140091] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.140237] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.140827] console [ttyS0] disabled
[ 0.160894] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 22, base_baud = 12500000) is a 16550A
[ 0.895860] console [ttyS0] enabled
[ 0.900668] loop: module loaded
[ 0.904087] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 0.913187] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 0.922305] scsi host0: ahci-mvebu
[ 0.925837] scsi host1: ahci-mvebu
[ 0.929308] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41
[ 0.937274] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41
[ 0.945574] pxa3xx-nand f10d0000.flash: This platform can't do DMA on this device
[ 0.953400] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xda
[ 0.959790] nand: Macronix MX30LF2G18AC
[ 0.963642] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.971255] pxa3xx-nand f10d0000.flash: ECC strength 16, ECC step size 2048
[ 0.978489] Bad block table found at page 131008, version 0x01
[ 0.984796] Bad block table found at page 130944, version 0x01
[ 0.990886] nand_read_bbt: bad block at 0x000007060000
[ 0.996132] 10 fixed-partitions partitions found on MTD device pxa3xx_nand-0
[ 1.003218] Creating 10 MTD partitions on "pxa3xx_nand-0":
[ 1.008727] 0x000000000000-0x000000200000 : "u-boot"
[ 1.013920] 0x000000200000-0x000000220000 : "u_env"
[ 1.018981] 0x000000220000-0x000000260000 : "s_env"
[ 1.024042] 0x000000260000-0x000000820000 : "unused_area"
[ 1.029626] 0x0000007e0000-0x000000820000 : "devinfo"
[ 1.034865] 0x000000900000-0x000008400000 : "kernel1"
[ 1.040322] 0x000000c00000-0x000008400000 : "ubi"
[ 1.045424] 0x000008400000-0x00000ff00000 : "kernel2"
[ 1.050888] 0x000008700000-0x00000ff00000 : "rootfs2"
[ 1.056337] 0x00000ff00000-0x000010000000 : "BBT"
[ 1.061503] libphy: Fixed MDIO Bus: probed
[ 1.065883] libphy: orion_mdio_bus: probed
[ 1.070155] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[ 1.078767] mvneta f1070000.ethernet eth0: Using hardware mac address 60:38:e0:d0:9f:f0
[ 1.087957] mvneta f1034000.ethernet eth1: Using hardware mac address 60:38:e0:d0:9f:f0
[ 1.096142] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.102705] ehci-pci: EHCI PCI platform driver
[ 1.107189] ehci-platform: EHCI generic platform driver
[ 1.112498] ehci-orion: EHCI orion driver
[ 1.116598] orion-ehci f1058000.usb: EHCI Host Controller
[ 1.122035] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[ 1.129675] orion-ehci f1058000.usb: irq 38, io mem 0xf1058000
[ 1.159724] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[ 1.165859] hub 1-0:1.0: USB hub found
[ 1.169635] hub 1-0:1.0: 1 port detected
[ 1.173965] usbcore: registered new interface driver usb-storage
[ 1.180149] i2c /dev entries driver
[ 1.194884] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.207288] orion_wdt: Initial timeout 171 sec
[ 1.211970] sdhci: Secure Digital Host Controller Interface driver
[ 1.218177] sdhci: Copyright(c) Pierre Ossman
[ 1.270944] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.276394] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.279746] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA
[ 1.289323] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.301070] marvell-cesa f1090000.crypto: CESA device successfully registered
[ 1.308598] NET: Registered protocol family 10
[ 1.313456] Segment Routing with IPv6
[ 1.317169] NET: Registered protocol family 17
[ 1.321655] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.334771] 8021q: 802.1Q VLAN Support v1.8
[ 1.339003] Registering SWP/SWPB emulation handler
[ 1.345191] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 1.350594] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
[ 1.358166] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[ 1.367454] xhci-hcd f10f8000.usb3: irq 44, io mem 0xf10f8000
[ 1.373439] hub 2-0:1.0: USB hub found
[ 1.377230] hub 2-0:1.0: 1 port detected
[ 1.381284] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 1.386630] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
[ 1.394159] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed
[ 1.400664] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.408950] hub 3-0:1.0: USB hub found
[ 1.412744] hub 3-0:1.0: 1 port detected
[ 1.417075] UBI: auto-attach mtd6
[ 1.420434] ubi0: attaching mtd6
[ 1.430895] random: fast init done
[ 1.444624] mmc0: new high speed SDIO card at address 0001
[ 1.860623] ubi0: scanning is finished
[ 1.870115] ubi0: attached mtd6 (name "ubi", size 120 MiB)
[ 1.875626] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.882536] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.889353] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.896347] ubi0: good PEBs: 959, bad PEBs: 1, corrupted PEBs: 0
[ 1.902382] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 1.909636] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 1431149825
[ 1.918810] ubi0: available PEBs: 0, total reserved PEBs: 959, PEBs reserved for bad PEB handling: 39
[ 1.928076] ubi0: background thread "ubi_bgt0d" started, PID 706
[ 1.934538] block ubiblock0_0: created from ubi0:0(rootfs)
[ 1.940058] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 1.947228] mvsw61xx 10.mvsw61xx: Found MV88E6352 at f1072004.mdio-mii:10
[ 1.954053] mvsw61xx 10.mvsw61xx: Using direct addressing
[ 1.968359] hctosys: unable to open rtc device (rtc0)
[ 1.975616] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 1.983262] Freeing unused kernel memory: 1024K
[ 2.148070] init: Console is alive
[ 2.151560] init: - watchdog -
[ 2.409765] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.443388] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.451355] init: - preinit -
[ 2.611262] mvneta f1070000.ethernet tmp0: renamed from eth0
[ 2.617489] random: procd: uninitialized urandom read (4 bytes read)
[ 2.660947] mvneta f1034000.ethernet eth0: renamed from eth1
[ 2.710902] mvneta f1070000.ethernet eth1: renamed from tmp0
[ 2.942431] random: jshn: uninitialized urandom read (4 bytes read)
[ 2.973739] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.137488] mvneta f1034000.ethernet eth0: configuring for fixed/sgmii link mode
[ 3.145285] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.151314] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 3.159206] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.213981] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 817
[ 6.282069] random: crng init done
[ 6.285487] random: 3 urandom warning(s) missed due to ratelimiting
[ 6.295548] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 6.303422] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 6.313385] UBIFS (ubi0:1): FS size: 111738880 bytes (106 MiB, 880 LEBs), journal size 5586944 bytes (5 MiB, 44 LEBs)
[ 6.324044] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
[ 6.330691] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 25C30D1B-E0E3-41B7-A899-125CDEAC9F46, small LPT model
[ 6.345398] mount_root: switching to ubifs overlay
[ 6.423347] urandom-seed: Seeding with /etc/urandom.seed
[ 6.458057] mvneta f1034000.ethernet eth0: Link is Down
[ 6.503602] procd: - early -
[ 6.506518] procd: - watchdog -
[ 7.104801] procd: - watchdog -
[ 7.108034] procd: - ubus -
[ 7.161737] procd: - init -
[ 7.315719] kmodloader: loading kernel modules from /etc/modules.d/*
[ 7.325311] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 7.333342] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 7.341412] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 7.356975] <<Marvell Mac80211 Wireless PCIE Network Driver version 10.3.8.0-20181114>>
[ 7.365052] pci 0000:00:01.0: enabling device (0140 -> 0142)
[ 7.370896] ieee80211 phy0: priv->pcmd_buf = ddd40000 priv->pphys_cmd_buf = 1dd40000
[ 7.436533] ieee80211 phy0: fw download start
[ 7.436538] ieee80211 phy0: ddr init: download start
[ 7.436917] ieee80211 phy0: ddr init: download complete
[ 7.574747] ieee80211 phy0: FwSize = 450732 downloaded Size = 450732 curr_iteration 65521
[ 10.445719] ieee80211 phy0: fw download complete
[ 10.445760] ieee80211 phy0: device node: /soc/pcie/pcie@1,0
[ 10.460871] ieee80211 phy0: pcmd = ddd40000
[ 10.478739] ieee80211 phy0: firmware version: 0x9030206
[ 10.838725] ieee80211 phy0: firmware region code: 10
[ 10.879562] ieee80211 phy0: 2G disabled, 5G enabled
[ 10.884490] ieee80211 phy0: 4 TX antennas, 4 RX antennas
[ 10.890053] pci 0000:00:02.0: enabling device (0140 -> 0142)
[ 10.895870] ieee80211 phy1: priv->pcmd_buf = d983c000 priv->pphys_cmd_buf = 1983c000
[ 10.899749] ieee80211 phy1: fw download start
[ 10.899755] ieee80211 phy1: ddr init: download start
[ 10.900137] ieee80211 phy1: ddr init: download complete
[ 11.043221] ieee80211 phy1: FwSize = 450732 downloaded Size = 450732 curr_iteration 65526
[ 12.239720] ieee80211 phy1: fw download complete
[ 12.239762] ieee80211 phy1: device node: /soc/pcie/pcie@2,0
[ 12.254910] ieee80211 phy1: pcmd = d983c000
[ 12.272951] ieee80211 phy1: firmware version: 0x9030206
[ 12.633728] ieee80211 phy1: firmware region code: 10
[ 12.666575] ieee80211 phy1: 2G enabled, 5G disabled
[ 12.671496] ieee80211 phy1: 4 TX antennas, 4 RX antennas
[ 12.698500] hidraw: raw HID events driver (C) Jiri Kosina
[ 12.708670] u32 classifier
[ 12.711426] input device check on
[ 12.715107] Actions configured
[ 12.719127] Mirror/redirect action on
[ 12.724905] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 12.738199] Bluetooth: Core ver 2.22
[ 12.741875] NET: Registered protocol family 31
[ 12.746344] Bluetooth: HCI device and connection manager initialized
[ 12.752745] Bluetooth: HCI socket layer initialized
[ 12.757652] Bluetooth: L2CAP socket layer initialized
[ 12.762753] Bluetooth: SCO socket layer initialized
[ 12.768166] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 12.773527] Bluetooth: BNEP filters: protocol multicast
[ 12.778785] Bluetooth: BNEP socket layer initialized
[ 12.784924] Bluetooth: vendor=0x2df, device=0x9136, class=255, fn=2
[ 13.596960] Bluetooth: FW download over, size 695532 bytes
[ 14.199750] sdio platform data not available
[ 14.200485] usbcore: registered new interface driver btusb
[ 14.210850] Bluetooth: HCI UART driver ver 2.3
[ 14.215318] Bluetooth: HCI UART protocol H4 registered
[ 14.220488] Bluetooth: HCI UART protocol BCSP registered
[ 14.225824] Bluetooth: HCI UART protocol ATH3K registered
[ 14.231645] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 14.237595] Bluetooth: HIDP socket layer initialized
[ 14.243066] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 14.255476] mwifiex_sdio mmc0:0001:1: WLAN FW already running! Skip FW dnld
[ 14.262496] mwifiex_sdio mmc0:0001:1: WLAN FW is active
[ 14.267810] Bluetooth: RFCOMM TTY layer initialized
[ 14.272740] Bluetooth: RFCOMM socket layer initialized
[ 14.277908] Bluetooth: RFCOMM ver 1.11
[ 14.289508] xt_time: kernel timezone is -0000
[ 14.295758] PPP generic driver version 2.4.2
[ 14.300409] NET: Registered protocol family 24
[ 14.305691] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 14.313168] mwifiex_sdio mmc0:0001:1: CMD_RESP: cmd 0x242 error, result=0x2
[ 14.320181] mwifiex_sdio mmc0:0001:1: mwifiex_process_cmdresp: cmd 0x242 failed during initialization
[ 14.358368] mwifiex_sdio mmc0:0001:1: info: MWIFIEX VERSION: mwifiex 1.0 (15.68.7.p71)
[ 14.366444] mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (15.68.7.p71)
[ 15.569717] mvneta f1034000.ethernet eth0: configuring for fixed/sgmii link mode
[ 15.577312] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.583226] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 15.591503] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.600787] br-lan: port 1(eth0.1) entered blocking state
[ 15.606223] br-lan: port 1(eth0.1) entered disabled state
[ 15.611867] device eth0.1 entered promiscuous mode
[ 15.616762] device eth0 entered promiscuous mode
[ 15.624289] br-lan: port 1(eth0.1) entered blocking state
[ 15.629749] br-lan: port 1(eth0.1) entered forwarding state
[ 15.635451] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 15.650233] mvneta f1070000.ethernet eth1: configuring for fixed/rgmii-id link mode
[ 15.658515] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 15.664461] mvneta f1070000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 15.672537] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 16.534777] ieee80211 phy1: change: 0xffffffff
[ 16.625006] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 16.632923] br-lan: port 2(wlan1) entered blocking state
[ 16.638397] br-lan: port 2(wlan1) entered disabled state
[ 16.643997] device wlan1 entered promiscuous mode
[ 16.648754] br-lan: port 2(wlan1) entered blocking state
[ 16.654118] br-lan: port 2(wlan1) entered forwarding state
[ 16.659926] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 16.672524] br-lan: port 2(wlan1) entered disabled state
[ 16.741439] ieee80211 phy1: change: 0x100
[ 16.749776] ieee80211 phy1: change: 0x42
[ 16.916010] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 16.922538] br-lan: port 2(wlan1) entered blocking state
[ 16.927886] br-lan: port 2(wlan1) entered forwarding state
[ 64.628091] ieee80211 phy1: staid 4 deleted
Fixed. Did the following in ssh
uci set wireless.radio0.country='US'
uci set wireless.radio1.country='US'
uci set wireless.radio0.disabled='0'
uci commit wireless; wifi
reboot
This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.