[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 5.4.182 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16514-604274c24b)) #0 SMP Thu Mar 10 22:32:59 2022
[ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Linksys WRT1900ACS
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] Normal zone: 1152 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 11 pages/cpu s15628 r8192 d21236 u45056
[ 0.000000] pcpu-alloc: s15628 r8192 d21236 u45056 alloc=11*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129920
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock7 ro rootdelay=1 rootfstype=jffs2 earlyprintk mtdparts=armada-nand:2048K(uboot)ro,256K(u_env),256K(s_env),1m@9m(devinfo),40m@10m(kernel),34m@16m(rootfs),40m@50m(alt_kernel),34m@56m(alt_rootfs),80m@10m(ubifs),-@90m(syscfg)
[ 0.000000] Bootloader command line (ignored): console=ttyS0,115200 root=/dev/mtdblock7 ro rootdelay=1 rootfstype=jffs2 earlyprintk mtdparts=armada-nand:2048K(uboot)ro,256K(u_env),256K(s_env),1m@9m(devinfo),40m@10m(kernel),34m@16m(rootfs),40m@50m(alt_kernel),34m@56m(alt_rootfs),80m@10m(ubifs),-@90m(syscfg)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 508356K/524288K available (7168K kernel code, 235K rwdata, 996K rodata, 1024K init, 239K bss, 15932K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] L2C: DT/platform modifies aux control register: 0x06070000 -> 0x16070000
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 D prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[ 0.000000] random: get_random_bytes called from 0xc0a00c78 with crng_init=0
[ 0.000006] sched_clock: 64 bits at 800MHz, resolution 1ns, wraps every 4398046511103ns
[ 0.000015] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xb881274fa3, max_idle_ns: 440795210636 ns
[ 0.000028] Switching to timer-based delay loop, resolution 1ns
[ 0.000150] Ignoring duplicate/late registration of read_current_timer delay
[ 0.000156] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[ 0.000278] Calibrating delay loop (skipped), value calculated using timer frequency.. 1600.00 BogoMIPS (lpj=8000000)
[
[ 0.024077] mv_xor f1060800.xor: Marvell shared XOR driver
[ 0.084125] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.084242] mv_xor f1060900.xor: Marvell shared XOR driver
[ 0.144063] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.144225] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.144894] printk: console [ttyS0] disabled
[ 0.164976] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 22, base_baud = 12500000) is a 16550A
[ 1.039023] printk: console [ttyS0] enabled
[ 1.044913] loop: module loaded
[ 1.048068] Loading iSCSI transport class v2.0-870.
[ 1.053383] ahci-mvebu f10a8000.sata: f10a8000.sata supply ahci not found, using dummy regulator
[ 1.062249] ahci-mvebu f10a8000.sata: f10a8000.sata supply phy not found, using dummy regulator
[ 1.071019] ahci-mvebu f10a8000.sata: f10a8000.sata supply target not found, using dummy regulator
[ 1.080082] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 1.089175] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.098278] scsi host0: ahci-mvebu
[ 1.101886] scsi host1: ahci-mvebu
[ 1.105399] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41
[ 1.113348] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41
[ 1.121820] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
[ 1.128216] nand: AMD/Spansion S34ML01G2
[ 1.132154] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.140151] Bad block table found at page 65472, version 0x01
[ 1.146564] Bad block table found at page 65408, version 0x01
[ 1.152754] 10 fixed-partitions partitions found on MTD device pxa3xx_nand-0
[ 1.159841] Creating 10 MTD partitions on "pxa3xx_nand-0":
[ 1.165359] 0x000000000000-0x000000200000 : "u-boot"
[ 1.170640] 0x000000200000-0x000000240000 : "u_env"
[ 1.175800] 0x000000240000-0x000000280000 : "s_env"
[ 1.180946] 0x000000900000-0x000000a00000 : "devinfo"
[ 1.186289] 0x000000a00000-0x000003200000 : "kernel1"
[ 1.191672] 0x000001000000-0x000003200000 : "rootfs1"
[ 1.197041] 0x000003200000-0x000005a00000 : "kernel2"
[ 1.202409] 0x000003800000-0x000005a00000 : "ubi"
[ 1.207434] 0x000005a00000-0x000008000000 : "syscfg"
[ 1.212709] 0x000000280000-0x000000900000 : "unused_area"
[ 1.219251] mv88e6085 f1072004.mdio-mii:00: switch 0x1760 detected: Marvell 88E6176, revision 1
[ 1.390381] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[ 1.399204] mvneta f1070000.ethernet eth0: Using hardware mac address 58:ef:68:0d:10:cf
[ 1.407320] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.413880] ehci-pci: EHCI PCI platform driver
[ 1.418366] ehci-platform: EHCI generic platform driver
[ 1.423684] ehci-orion: EHCI orion driver
[ 1.427787] orion-ehci f1058000.usb: EHCI Host Controller
[ 1.433216] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[ 1.440864] orion-ehci f1058000.usb: irq 38, io mem 0xf1058000
[ 1.449985] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.455433] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.473741] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[ 1.479894] hub 1-0:1.0: USB hub found
[ 1.483678] hub 1-0:1.0: 1 port detected
[ 1.488042] usbcore: registered new interface driver usb-storage
[ 1.494232] i2c /dev entries driver
[ 1.500307] orion_wdt: Initial timeout 171 sec
[ 1.505017] sdhci: Secure Digital Host Controller Interface driver
[ 1.511221] sdhci: Copyright(c) Pierre Ossman
[ 1.515690] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.524995] marvell-cesa f1090000.crypto: CESA device successfully registered
[ 1.532657] NET: Registered protocol family 10
[ 1.537523] Segment Routing with IPv6
[ 1.541231] NET: Registered protocol family 17
[ 1.545722] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.558824] 8021q: 802.1Q VLAN Support v1.8
[ 1.563083] Registering SWP/SWPB emulation handler
[ 1.569791] mv88e6085 f1072004.mdio-mii:00: switch 0x1760 detected: Marvell 88E6176, revision 1
[ 1.908945] mv88e6085 f1072004.mdio-mii:00 lan4 (uninitialized): PHY [mv88e6xxx-1:00] driver [Marvell 88E1540]
[ 1.926301] mv88e6085 f1072004.mdio-mii:00 lan3 (uninitialized): PHY [mv88e6xxx-1:01] driver [Marvell 88E1540]
[ 1.943597] mv88e6085 f1072004.mdio-mii:00 lan2 (uninitialized): PHY [mv88e6xxx-1:02] driver [Marvell 88E1540]
[ 1.960918] mv88e6085 f1072004.mdio-mii:00 lan1 (uninitialized): PHY [mv88e6xxx-1:03] driver [Marvell 88E1540]
[ 1.978212] mv88e6085 f1072004.mdio-mii:00 wan (uninitialized): PHY [mv88e6xxx-1:04] driver [Marvell 88E1540]
[ 2.008397] mv88e6085 f1072004.mdio-mii:00: configuring for fixed/ link mode
[ 2.016838] DSA: tree 0 setup
[ 2.019978] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 2.025334] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
[ 2.032903] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[ 2.042187] xhci-hcd f10f8000.usb3: irq 43, io mem 0xf10f8000
[ 2.048266] hub 2-0:1.0: USB hub found
[ 2.052050] hub 2-0:1.0: 1 port detected
[ 2.056109] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 2.061447] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
[ 2.068982] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed
[ 2.075410] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.083766] hub 3-0:1.0: USB hub found
[ 2.087581] hub 3-0:1.0: 1 port detected
[ 2.092061] UBI: auto-attach mtd7
[ 2.095402] ubi0: attaching mtd7
[ 2.104763] mv88e6085 f1072004.mdio-mii:00: Link is Up - 1Gbps/Full - flow control off
[ 2.281282] ubi0: scanning is finished
[ 2.292700] ubi0: attached mtd7 (name "ubi", size 34 MiB)
[ 2.298130] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.305040] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.311854] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.318848] ubi0: good PEBs: 272, bad PEBs: 0, corrupted PEBs: 0
[ 2.324882] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 2.332133] ubi0: max/mean erase counter: 5/2, WL threshold: 4096, image sequence number: 1646951579
[ 2.341306] ubi0: available PEBs: 0, total reserved PEBs: 272, PEBs reserved for bad PEB handling: 20
[ 2.351097] ubi0: background thread "ubi_bgt0d" started, PID 855
[ 2.351138] block ubiblock0_0: created from ubi0:0(rootfs)
[ 2.362641] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 2.369637] hctosys: unable to open rtc device (rtc0)
[ 2.374967] usb 2-1: new high-speed USB device number 2 using xhci-hcd
[ 2.381618] Waiting 1 sec before mounting root device...
[ 2.566849] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 2.573076] scsi host2: usb-storage 2-1:1.0
[ 3.446396] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 3.454060] Freeing unused kernel memory: 1024K
[ 3.483797] Run /sbin/init as init process
[ 3.664542] init: Console is alive
[ 3.668030] init: - watchdog -
[ 3.981860] scsi 2:0:0:0: Direct-Access Kingston DT 100 G2 1.00 PQ: 0 ANSI: 0 CCS
[ 3.991228] sd 2:0:0:0: [sda] 7557704 512-byte logical blocks: (3.87 GB/3.60 GiB)
[ 3.998910] sd 2:0:0:0: [sda] Write Protect is off
[ 4.003740] sd 2:0:0:0: [sda] Mode Sense: 0b 00 00 08
[ 4.003913] sd 2:0:0:0: [sda] No Caching mode page found
[ 4.009249] sd 2:0:0:0: [sda] Assuming drive cache: write through
[ 4.029027] sda: sda1
[ 4.032185] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 4.213719] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 4.242669] ehci-fsl: Freescale EHCI Host controller driver
[ 4.249137] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.255672] ohci-platform: OHCI generic platform driver
[ 4.261252] ohci-pci: OHCI PCI platform driver
[ 4.266243] usbcore: registered new interface driver uas
[ 4.271655] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 4.279341] init: - preinit -
[ 4.651516] random: jshn: uninitialized urandom read (4 bytes read)
[ 4.672389] random: jshn: uninitialized urandom read (4 bytes read)
[ 4.900575] random: jshn: uninitialized urandom read (4 bytes read)
[ 5.035025] mvneta f1070000.ethernet eth0: configuring for fixed/rgmii-id link mode
[ 5.043109] mvneta f1070000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 5.051005] mv88e6085 f1072004.mdio-mii:00 lan1: configuring for phy/gmii link mode
[ 5.061059] 8021q: adding VLAN 0 to HW filter on device lan1
[ 5.066781] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 8.485626] mv88e6085 f1072004.mdio-mii:00 lan1: Link is Up - 1Gbps/Full - flow control off
[ 8.494031] IPv6: ADDRCONF(NETDEV_CHANGE): lan1: link becomes ready
[ 9.152958] mount_root: loading kmods from internal overlay
[ 9.170049] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 9.178276] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 9.608818] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 9.623696] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 997
[ 9.655828] UBIFS (ubi0:1): recovery needed
[ 9.733788] random: fast init done
[ 9.798808] UBIFS (ubi0:1): recovery completed
[ 9.803315] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 9.811190] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 9.821151] UBIFS (ubi0:1): FS size: 18157568 bytes (17 MiB, 143 LEBs), journal size 1015809 bytes (0 MiB, 7 LEBs)
[ 9.831545] UBIFS (ubi0:1): reserved for root: 857626 bytes (837 KiB)
[ 9.838016] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID BB37E7E4-493F-407D-B057-9FBA74517A15, small LPT model
[ 9.850410] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 9.863719] block: extroot: not configured
[ 9.867901] UBIFS (ubi0:1): un-mount UBI device 0
[ 9.872630] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[ 9.881220] UBIFS (ubi0:1): Mounting in unauthenticated mode
[ 9.887015] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 999
[ 9.982542] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 9.990419] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 10.000378] UBIFS (ubi0:1): FS size: 18157568 bytes (17 MiB, 143 LEBs), journal size 1015809 bytes (0 MiB, 7 LEBs)
[ 10.010772] UBIFS (ubi0:1): reserved for root: 857626 bytes (837 KiB)
[ 10.017246] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID BB37E7E4-493F-407D-B057-9FBA74517A15, small LPT model
[ 10.389743] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 10.401729] block: extroot: not configured
[ 10.407164] mount_root: switching to ubifs overlay
[ 10.469144] ubi1: attaching mtd8
[ 10.663626] ubi1: scanning is finished
[ 10.675140] ubi1: attached mtd8 (name "syscfg", size 38 MiB)
[ 10.680825] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 10.687740] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 10.694566] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 10.701556] ubi1: good PEBs: 296, bad PEBs: 8, corrupted PEBs: 0
[ 10.707589] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 10.714844] ubi1: max/mean erase counter: 954/723, WL threshold: 4096, image sequence number: 1776815881
[ 10.724366] ubi1: available PEBs: 0, total reserved PEBs: 296, PEBs reserved for bad PEB handling: 12
[ 10.733627] ubi1: background thread "ubi_bgt1d" started, PID 1008
[ 10.744728] UBIFS (ubi1:0): Mounting in unauthenticated mode
[ 10.751063] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 1014
[ 10.842245] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "syscfg"
[ 10.849679] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 10.859640] UBIFS (ubi1:0): FS size: 34283520 bytes (32 MiB, 270 LEBs), journal size 1777664 bytes (1 MiB, 14 LEBs)
[ 10.870169] UBIFS (ubi1:0): reserved for root: 1619295 bytes (1581 KiB)
[ 10.876818] UBIFS (ubi1:0): media format: w4/r0 (latest is w5/r0), UUID C267E20D-B6E7-4100-A7E6-1F788F7CAE92, small LPT model
[ 10.891889] urandom-seed: Seeding with /etc/urandom.seed
[ 10.941518] mv88e6085 f1072004.mdio-mii:00 lan1: Link is Down
[ 10.955780] procd: - early -
[ 10.958694] procd: - watchdog -
[ 11.079170] urandom_read: 5 callbacks suppressed
[ 11.079173] random: jshn: uninitialized urandom read (4 bytes read)
[ 11.156903] random: jshn: uninitialized urandom read (4 bytes read)
[ 11.486353] procd: - watchdog -
[ 11.492565] procd: - ubus -
[ 11.547423] procd: - init -
[ 11.810648] kmodloader: loading kernel modules from /etc/modules.d/*
[ 11.818195] urngd: v1.0.2 started.
[ 11.824003] tun: Universal TUN/TAP device driver, 1.6
[ 11.832814] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 11.840873] gre: GRE over IPv4 demultiplexor driver
[ 11.855311] ip_gre: GRE over IPv4 tunneling driver
[ 11.871618] crng init done
[ 11.896643] cryptodev: driver 1.11 loaded.
[ 11.910113] Loading modules backported from Linux version v5.10.85-0-ge4f2aee6612e
[ 11.917738] Backport generated by backports.git v5.10.85-1-0-gf988973f
[ 11.966848] <<Marvell Mac80211 Wireless PCIE Network Driver version 10.3.8.0-20181210>>
[ 11.974932] pci 0000:00:01.0: enabling device (0140 -> 0142)
[ 11.980707] ieee80211 phy0: priv->pcmd_buf = cf846b14 priv->pphys_cmd_buf = 4f0f375e
[ 12.020419] ieee80211 phy0: fw download start
[ 12.204686] ieee80211 phy0: FwSize = 118776 downloaded Size = 118776 curr_iteration 65496
[ 13.173683] ieee80211 phy0: fw download complete
[ 13.173701] ieee80211 phy0: device node: pcie@1,0
[ 13.178918] ieee80211 phy0: pcmd = cf846b14
[ 13.196958] ieee80211 phy0: firmware version: 0x702091a
[ 13.239341] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
[ 13.570792] ieee80211 phy0: firmware region code: 30
[ 13.608523] ieee80211 phy0: 2G disabled, 5G enabled
[ 13.613434] ieee80211 phy0: 4 TX antennas, 4 RX antennas
[ 13.618986] pci 0000:00:02.0: enabling device (0140 -> 0142)
[ 13.624784] ieee80211 phy1: priv->pcmd_buf = 5923c855 priv->pphys_cmd_buf = 0e943043
[ 13.631149] ieee80211 phy1: fw download start
[ 13.750693] ieee80211 phy1: FwSize = 118776 downloaded Size = 118776 curr_iteration 65514
[ 14.709679] ieee80211 phy1: fw download complete
[ 14.709706] ieee80211 phy1: device node: pcie@2,0
[ 14.714957] ieee80211 phy1: pcmd = 5923c855
[ 14.732692] ieee80211 phy1: firmware version: 0x702091a
[ 15.083671] ieee80211 phy1: firmware region code: 30
[ 15.120456] ieee80211 phy1: 2G enabled, 5G disabled
[ 15.125388] ieee80211 phy1: 4 TX antennas, 4 RX antennas
[ 15.146273] videodev: Linux video capture interface: v2.00
[ 15.153074] GACT probability on
[ 15.156652] Mirror/redirect action on
[ 15.162566] u32 classifier
[ 15.165320] input device check on
[ 15.168999] Actions configured
[ 15.178047] fuse: init (API version 7.31)
[ 15.184921] usbcore: registered new interface driver cdc_acm
[ 15.190610] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 15.215782] usbcore: registered new interface driver cdc_wdm
[ 15.232555] hso: drivers/net/usb/hso.c: Option Wireless
[ 15.237915] usbcore: registered new interface driver hso
[ 15.246656] usbcore: registered new interface driver ipheth
[ 15.254204] usbcore: registered new interface driver kaweth
[ 15.305557] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 15.313083] usbcore: registered new interface driver pegasus
[ 15.321770] usbcore: registered new interface driver r8152
[ 15.327967] usbcore: registered new interface driver rtl8150
[ 15.337125] usbcore: registered new interface driver ums-alauda
[ 15.343575] usbcore: registered new interface driver ums-cypress
[ 15.350377] usbcore: registered new interface driver ums-datafab
[ 15.357208] usbcore: registered new interface driver ums-freecom
[ 15.363725] usbcore: registered new interface driver ums-isd200
[ 15.370527] usbcore: registered new interface driver ums-jumpshot
[ 15.377074] usbcore: registered new interface driver ums-karma
[ 15.383329] usbcore: registered new interface driver ums-sddr09
[ 15.389747] usbcore: registered new interface driver ums-sddr55
[ 15.414923] usbcore: registered new interface driver ums-usbat
[ 15.421279] usbcore: registered new interface driver usblp
[ 15.444469] usbcore: registered new interface driver usbserial_generic
[ 15.451091] usbserial: USB Serial support registered for generic
[ 15.509449] xt_time: kernel timezone is -0000
[ 15.516132] usbcore: registered new interface driver asix
[ 15.523173] usbcore: registered new interface driver ax88179_178a
[ 15.529991] usbcore: registered new interface driver cdc_eem
[ 15.536469] usbcore: registered new interface driver cdc_ether
[ 15.543490] usbcore: registered new interface driver cdc_ncm
[ 15.551157] usbcore: registered new interface driver cdc_subset
[ 15.560879] usbcore: registered new interface driver dm9601
[ 15.571066] usbcore: registered new interface driver huawei_cdc_ncm
[ 15.579165] usbcore: registered new interface driver kalmia
[ 15.590505] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 15.600352] usbcore: registered new interface driver plusb
[ 15.610435] PPP generic driver version 2.4.2
[ 15.616522] PPP MPPE Compression module registered
[ 15.622440] NET: Registered protocol family 24
[ 15.628594] PPTP driver version 0.8.5
[ 15.634305] usbcore: registered new interface driver qmi_wwan
[ 15.642080] usbcore: registered new interface driver rndis_host
[ 15.649894] usbcore: registered new interface driver sierra
[ 15.655589] usbserial: USB Serial support registered for Sierra USB modem
[ 15.664757] usbcore: registered new interface driver sierra_net
[ 15.673988] usbcore: registered new interface driver smsc95xx
[ 15.681920] usbcore: registered new interface driver sr9700
[ 15.695493] usbcore: registered new interface driver uvcvideo
[ 15.701276] USB Video Class driver (1.1.1)
[ 15.707028] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[ 15.714919] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ 15.725254] usbcore: registered new interface driver cdc_mbim
[ 15.731640] usbcore: registered new interface driver option
[ 15.737333] usbserial: USB Serial support registered for GSM modem (1-port)
[ 15.746434] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 17.958806] mvneta f1070000.ethernet eth0: Link is Down
[ 17.969365] mvneta f1070000.ethernet eth0: configuring for fixed/rgmii-id link mode
[ 17.977351] mvneta f1070000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 17.978301] mv88e6085 f1072004.mdio-mii:00 lan1: configuring for phy/gmii link mode
[ 17.997886] 8021q: adding VLAN 0 to HW filter on device lan1
[ 18.003603] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.052406] br-lan: port 1(lan1) entered blocking state
[ 18.057669] br-lan: port 1(lan1) entered disabled state
[ 18.063519] device lan1 entered promiscuous mode
[ 18.068173] device eth0 entered promiscuous mode
[ 18.133017] mv88e6085 f1072004.mdio-mii:00 lan2: configuring for phy/gmii link mode
[ 18.146733] 8021q: adding VLAN 0 to HW filter on device lan2
[ 18.152554] br-lan: port 2(lan2) entered blocking state
[ 18.157875] br-lan: port 2(lan2) entered disabled state
[ 18.165840] device lan2 entered promiscuous mode
[ 18.198746] mv88e6085 f1072004.mdio-mii:00: p6: already a member of VLAN 1
[ 18.226083] mv88e6085 f1072004.mdio-mii:00 lan3: configuring for phy/gmii link mode
[ 18.239393] 8021q: adding VLAN 0 to HW filter on device lan3
[ 18.326234] br-lan: port 3(lan3) entered blocking state
[ 18.331485] br-lan: port 3(lan3) entered disabled state
[ 18.338238] device lan3 entered promiscuous mode
[ 18.348474] mv88e6085 f1072004.mdio-mii:00: p6: already a member of VLAN 1
[ 18.359949] mv88e6085 f1072004.mdio-mii:00 lan4: configuring for phy/gmii link mode
[ 18.370409] 8021q: adding VLAN 0 to HW filter on device lan4
[ 18.439853] br-lan: port 4(lan4) entered blocking state
[ 18.445120] br-lan: port 4(lan4) entered disabled state
[ 18.452011] device lan4 entered promiscuous mode
[ 18.460655] mv88e6085 f1072004.mdio-mii:00: p6: already a member of VLAN 1
[ 18.473064] mv88e6085 f1072004.mdio-mii:00 wan: configuring for phy/gmii link mode
[ 18.483881] 8021q: adding VLAN 0 to HW filter on device wan
[ 19.256224] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01aa0000: 0x4c2e instead
[ 19.268025] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01aa0004: 0x534b instead
[ 19.279248] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01aa0008: 0x302e instead
[ 19.289653] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01aa000c: 0x3030 instead
[ 19.300828] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01aa0010: 0x5744 instead
[ 19.310955] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01aa0014: 0x3931 instead
[ 19.322843] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01aa0018: 0x4341 instead
[ 19.334538] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01aa001c: 0x2032 instead
[ 19.345110] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01aa0020: 0x3436 instead
[ 19.354988] jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x01aa0024: 0x3245 instead
[ 19.364551] jffs2: Further such events for this erase block will not be printed
[ 19.564408] jffs2: notice: (3812) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 20.688814] ieee80211 phy1: change: 0xffffffff
[ 20.764921] br-lan: port 5(wlan1) entered blocking state
[ 20.770266] br-lan: port 5(wlan1) entered disabled state
[ 20.775832] device wlan1 entered promiscuous mode
[ 20.780629] br-lan: port 5(wlan1) entered blocking state
[ 20.785978] br-lan: port 5(wlan1) entered forwarding state
[ 20.792548] br-lan: port 5(wlan1) entered disabled state
[ 21.032995] ieee80211 phy0: change: 0xffffffff
[ 21.115760] br-lan: port 6(wlan0) entered blocking state
[ 21.121106] br-lan: port 6(wlan0) entered disabled state
[ 21.126585] device wlan0 entered promiscuous mode
[ 21.131376] br-lan: port 6(wlan0) entered blocking state
[ 21.136729] br-lan: port 6(wlan0) entered forwarding state
[ 21.142304] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 21.840642] mv88e6085 f1072004.mdio-mii:00 wan: Link is Up - 1Gbps/Full - flow control off
[ 21.850137] br-lan: port 6(wlan0) entered disabled state
[ 21.855654] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready
[ 22.809709] mv88e6085 f1072004.mdio-mii:00 lan1: Link is Up - 1Gbps/Full - flow control off
[ 22.818813] br-lan: port 1(lan1) entered blocking state
[ 22.824091] br-lan: port 1(lan1) entered forwarding state
[ 23.362445] pppoe-wan: renamed from ppp0
[ 25.844215] ieee80211 phy1: change: 0x100
[ 25.857266] ieee80211 phy1: change: 0x42
[ 25.919986] mv88e6085 f1072004.mdio-mii:00 lan1: Link is Down
[ 25.980731] br-lan: port 1(lan1) entered disabled state
[ 25.986065] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 25.992515] br-lan: port 5(wlan1) entered blocking state
[ 25.997867] br-lan: port 5(wlan1) entered forwarding state
[ 26.160558] ieee80211 phy0: change: 0x100
[ 26.173641] ieee80211 phy0: change: 0x40
[ 26.363682] ieee80211 phy0: change: 0x40
[ 26.553688] ieee80211 phy0: change: 0x40
[ 26.636289] ieee80211 phy0: change: 0x100
[ 26.648702] ieee80211 phy0: change: 0x100
[ 26.661747] ieee80211 phy0: change: 0x42
[ 26.809046] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 26.815551] br-lan: port 6(wlan0) entered blocking state
[ 26.820897] br-lan: port 6(wlan0) entered forwarding state
[ 28.778137] mv88e6085 f1072004.mdio-mii:00 lan1: Link is Up - 100Mbps/Full - flow control off
[ 28.787002] br-lan: port 1(lan1) entered blocking state
[ 28.792265] br-lan: port 1(lan1) entered forwarding state
[ 29.110527] mv88e6085 f1072004.mdio-mii:00 lan1: Link is Down
[ 29.116739] br-lan: port 1(lan1) entered disabled state
[ 31.657698] mv88e6085 f1072004.mdio-mii:00 lan1: Link is Up - 10Mbps/Full - flow control off
[ 31.666237] br-lan: port 1(lan1) entered blocking state
[ 31.671492] br-lan: port 1(lan1) entered forwarding state
[ 32.007060] ieee80211 phy0: Mac80211 start
[ 46.847927] mv88e6085 f1072004.mdio-mii:00 lan1: Link is Down
[ 46.853745] br-lan: port 1(lan1) entered disabled state
[ 49.775455] mv88e6085 f1072004.mdio-mii:00 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 49.788557] br-lan: port 1(lan1) entered blocking state
[ 49.793828] br-lan: port 1(lan1) entered forwarding state
[ 50.560775] ieee80211 phy1: Mac80211 start
[ 57.040978] ieee80211 phy1: Mac80211 start B
[ 58.271943] mv88e6085 f1072004.mdio-mii:00 lan1: Link is Down
[ 58.280941] br-lan: port 1(lan1) entered disabled state
[ 61.128735] mv88e6085 f1072004.mdio-mii:00 lan1: Link is Up - 1Gbps/Full - flow control off
[ 61.143665] br-lan: port 1(lan1) entered blocking state
[ 61.148955] br-lan: port 1(lan1) entered forwarding state
[ 111.829857] ieee80211 phy1: Mac80211 start
[ 116.567504] mvneta f1070000.ethernet eth0: bad rx status 0cc50000 (max frame length error), size=1536
[ 116.819535] mvneta f1070000.ethernet eth0: bad rx status 0cc50000 (max frame length error), size=1536
[ 117.067541] mvneta f1070000.ethernet eth0: bad rx status 0cc50000 (max frame length error), size=1536
[ 269.501350] jffs2: compression type 0x06 not available
[ 269.506523] jffs2: Error: jffs2_decompress returned -5
[ 269.511685] jffs2: read_cache_page() returned error: -5
[ 269.516942] jffs2: Error garbage collecting node at 01040000!
[ 269.522719] jffs2: No space for garbage collection. Aborting GC thread
And the million dollar question is....?
Sun Mar 13 19:46:16 2022 kern.err kernel: [17524.681198] mvneta f1070000.ethernet eth0: bad rx status 0cc50000 (max frame length error), size=1536
Sun Mar 13 19:46:17 2022 kern.err kernel: [17524.946621] mvneta f1070000.ethernet eth0: bad rx status 0cc50000 (max frame length error), size=1536
Sun Mar 13 19:46:17 2022 kern.err kernel: [17525.196590] mvneta f1070000.ethernet eth0: bad rx status 0cc50000 (max frame length error), size=1536
269.501350] jffs2: compression type 0x06 not available
[ 269.506523] jffs2: Error: jffs2_decompress returned -5
[ 269.511685] jffs2: read_cache_page() returned error: -5
[ 269.516942] jffs2: Error garbage collecting node at 01040000!
[ 269.522719] jffs2: No space for garbage collection. Aborting GC thread
What do all these errors mean?
Is this a custom / self made image?
this configuration is made by me and I used these packages 21.02-SNAPSHOT
6in4
adblock
banip
base-files
block-mount
busybox
ca-bundle
cgi-io
chat
irqbalance
collectd
collectd-mod-conntrack
collectd-mod-contextswitch
collectd-mod-cpu
collectd-mod-cpufreq
collectd-mod-df
collectd-mod-disk
collectd-mod-dns
collectd-mod-filecount
collectd-mod-interface
collectd-mod-iptables
collectd-mod-irq
collectd-mod-iwinfo
collectd-mod-load
collectd-mod-memory
collectd-mod-netlink
collectd-mod-network
collectd-mod-openvpn
collectd-mod-ping
collectd-mod-processes
collectd-mod-protocols
collectd-mod-rrdtool
collectd-mod-tcpconns
collectd-mod-thermal
collectd-mod-uptime
collectd-mod-vmem
collectd-mod-wireless
comgt
comgt-directip
comgt-ncm
conntrack
coreutils
coreutils-sort
dnsmasq-full
dropbear
ds-lite
e2fsprogs
edgeport-firmware
etherwake
fdisk
firewall
freshclam
fstools
fwtool
getrandom
hd-idle
hostapd-common
ip-tiny
ipset
htop
iperf3
iptables
iptables-mod-conntrack-extra
iptables-mod-extra
iptables-mod-filter
iptables-mod-hashlimit
iptables-mod-ipopt
iptables-mod-iprange
iptables-mod-ipv4options
iptables-mod-led
iptables-mod-length2
iw
iwinfo
jshn
jsonfilter
kernel
kmod-asn1-decoder
kmod-cfg80211
kmod-crypto-aead
kmod-crypto-arc4
kmod-crypto-authenc
kmod-crypto-crc32c
kmod-crypto-ecb
kmod-crypto-hash
kmod-crypto-kpp
kmod-crypto-lib-blake2s
kmod-crypto-lib-chacha20
kmod-crypto-lib-chacha20poly1305
kmod-crypto-lib-curve25519
kmod-crypto-lib-poly1305
kmod-crypto-manager
kmod-crypto-null
kmod-crypto-sha1
kmod-cryptodev
kmod-dma-buf
kmod-ebtables
kmod-ebtables-ipv4
kmod-ebtables-ipv6
kmod-fs-ext4
kmod-fuse
kmod-gpio-button-hotplug
kmod-gre
kmod-ifb
kmod-input-core
kmod-ip6-tunnel
kmod-ip6tables
kmod-ipt-compat-xtables
kmod-ipt-conntrack
kmod-ipt-conntrack-extra
kmod-ipt-core
kmod-ipt-extra
kmod-ipt-filter
kmod-ipt-hashlimit
kmod-ipt-ipopt
kmod-ipt-iprange
kmod-ipt-ipset
kmod-ipt-ipv4options
kmod-ipt-led
kmod-ipt-length2
kmod-ipt-nat
kmod-ipt-nat6
kmod-ipt-offload
kmod-ipt-raw
kmod-iptunnel
kmod-iptunnel4
kmod-iptunnel6
kmod-lib-crc-ccitt
kmod-lib-crc16
kmod-lib-crc32c
kmod-lib-textsearch
kmod-libphy
kmod-mac80211
kmod-mii
kmod-mmc
kmod-mppe
kmod-mwl8k
kmod-mwlwifi
kmod-netlink-diag
kmod-nf-conntrack
kmod-nf-conntrack-netlink
kmod-nf-conntrack6
kmod-nf-flow
kmod-nf-ipt
kmod-nf-ipt6
kmod-nf-nat
kmod-nf-nat6
kmod-nf-nathelper
kmod-nf-nathelper-extra
kmod-nf-reject
kmod-nf-reject6
kmod-nfnetlink
kmod-nls-base
kmod-nls-cp437
kmod-nls-cp850
kmod-nls-cp852
kmod-nls-iso8859-1
kmod-nls-iso8859-2
kmod-nls-utf8
kmod-ppp
kmod-pppoe
kmod-pppox
kmod-pptp
kmod-sched-cake
kmod-sched-core
kmod-scsi-core
kmod-sit
kmod-slhc
kmod-tun
kmod-udptunnel4
kmod-udptunnel6
kmod-usb-acm
kmod-usb-core
kmod-usb-ehci
kmod-usb-net
kmod-usb-net-asix
kmod-usb-net-asix-ax88179
kmod-usb-net-cdc-eem
kmod-usb-net-cdc-ether
kmod-usb-net-cdc-mbim
kmod-usb-net-cdc-ncm
kmod-usb-net-cdc-subset
kmod-usb-net-dm9601-ether
kmod-usb-net-hso
kmod-usb-net-huawei-cdc-ncm
kmod-usb-net-ipheth
kmod-usb-net-kalmia
kmod-usb-net-kaweth
kmod-usb-net-mcs7830
kmod-usb-net-pegasus
kmod-usb-net-pl
kmod-usb-net-qmi-wwan
kmod-usb-net-rndis
kmod-usb-net-rtl8150
kmod-usb-net-rtl8152
kmod-usb-net-sierrawireless
kmod-usb-net-smsc95xx
kmod-usb-net-sr9700
kmod-usb-ohci
kmod-usb-ohci-pci
kmod-usb-printer
kmod-usb-serial
kmod-usb-serial-option
kmod-usb-serial-sierrawireless
kmod-usb-serial-wwan
kmod-usb-storage
kmod-usb-storage-extras
kmod-usb-storage-uas
kmod-usb-wdm
kmod-usb2
kmod-usb2-pci
kmod-usb3
kmod-video-core
kmod-video-uvc
kmod-video-videobuf2
kmod-wireguard
libblkid
libblobmsg-json
libbpf
libc
libcap-ng
libcomerr
libelf
libext2fs
libfdisk
libgmp
libip4tc
libip6tc
libipset
libiwinfo
libiwinfo-lua
libjson-c
libjson-script
libltdl
liblua
liblucihttp
liblucihttp-lua
liblzo
libmbedtls
libmnl
libncurses
libnetfilter-conntrack
libnetfilter-cthelper
libnetfilter-cttimeout
libnetfilter-queue
libnettle
libnfnetlink
libnl-tiny
libopenssl
liboping
libpcap
librrd1
libsmartcols
libss
libubox
libubus
libubus-lua
libuci
libuclient
libusb-1.0
libustream-wolfssl
libuuid
libwolfssl
libxtables
logd
lua
luci
luci-app-adblock
luci-app-advanced-reboot
luci-app-attendedsysupgrade
luci-app-banip
luci-app-commands
luci-app-ddns
luci-app-firewall
luci-app-hd-idle
luci-app-nlbwmon
luci-app-openvpn
luci-app-opkg
luci-app-statistics
luci-app-uhttpd
luci-app-upnp
luci-app-watchcat
luci-app-wifischedule
luci-app-wireguard
luci-app-wol
luci-base
luci-compat
luci-i18n-adblock-en
luci-i18n-advanced-reboot-en
luci-i18n-banip-en
luci-i18n-base-en
luci-i18n-commands-en
luci-i18n-ddns-en
luci-i18n-firewall-en
luci-i18n-hd-idle-en
luci-i18n-nlbwmon-en
luci-i18n-openvpn-en
luci-i18n-opkg-en
luci-i18n-statistics-en
luci-i18n-uhttpd-en
luci-i18n-upnp-en
luci-i18n-wifischedule-en
luci-i18n-wireguard-en
luci-i18n-wol-en
luci-lib-base
luci-lib-ip
luci-lib-ipkg
luci-lib-iptparser
luci-lib-jsonc
luci-lib-nixio
luci-mod-admin-full
luci-mod-network
luci-mod-status
luci-mod-system
luci-proto-3g
luci-proto-ipv6
luci-proto-ncm
luci-proto-ppp
luci-proto-qmi
luci-proto-wireguard
luci-ssl
luci-theme-bootstrap
luci-theme-material
luci-theme-openwrt-2020
miniupnpd
monit-nossl
mtd
mwifiex-pcie-firmware
mwifiex-sdio-firmware
mwl8k-firmware
mwlwifi-firmware-88w8864
mwlwifi-firmware-88w8897
mwlwifi-firmware-88w8964
mwlwifi-firmware-88w8997
nano
netifd
nlbwmon
odhcp6c
openssh-sftp-server
openvpn-mbedtls
openwrt-keyring
opkg
p910nd
ppp
ppp-mod-pppoe
ppp-mod-pptp
procd
px5g-wolfssl
resolveip
rpcd
rpcd-mod-file
rpcd-mod-iwinfo
rpcd-mod-luci
rpcd-mod-rrdns
rrdtool1
sqm-scripts
sqm-scripts-extra
ss
swconfig
tcpdump
terminfo
ubi-utils
uboot-envtools
ubox
ubus
ubusd
uci
uclient-fetch
uhttpd
uhttpd-mod-ubus
umbim
uqmi
urandom-seed
urngd
usb-modeswitch
usign
watchcat
wifischedule
wireguard-tools
wireless-regdb
wpad-basic-wolfssl
wwan
zlib
these errors can be critical to the proper operation of the router?
Some device on the network sent a packet that was too large. This is not a problem with the router.
I think this is a lack of RAM error. Or is the overlay filesystem full?
OpenWrt 21.02-SNAPSHOT, r16514-604274c24b
-----------------------------------------------------
root@OpenWrt:~# free
total used free shared buff/cache available
Mem: 509380 69804 367144 4488 72432 385456
Swap: 0 0 0
root@OpenWrt:~# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 11776 11776 0 100% /rom
tmpfs 254688 4488 250200 2% /tmp
/dev/ubi0_1 15712 344 14532 2% /overlay
overlayfs:/overlay 15712 344 14532 2% /
ubi1:syscfg 30276 260 28436 1% /tmp/syscfg
tmpfs 512 0 512 0% /dev
/dev/sda1 3652660 21536 3425864 1% /mnt/sda1
/dev/mtdblock5 34816 28276 6540 81% /mnt/mtdblock5
/dev/ubi1_0 30276 260 28436 1% /mnt/ubi1_0
root@OpenWrt:~# cat /proc/meminfo
MemTotal: 509380 kB
MemFree: 366960 kB
MemAvailable: 385368 kB
Buffers: 26736 kB
Cached: 37148 kB
SwapCached: 0 kB
Active: 75072 kB
Inactive: 17104 kB
Active(anon): 32712 kB
Inactive(anon): 72 kB
Active(file): 42360 kB
Inactive(file): 17032 kB
Unevictable: 0 kB
Mlocked: 0 kB
HighTotal: 0 kB
HighFree: 0 kB
LowTotal: 509380 kB
LowFree: 366960 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 32 kB
Writeback: 0 kB
AnonPages: 28296 kB
Mapped: 11776 kB
Shmem: 4488 kB
KReclaimable: 8652 kB
Slab: 26400 kB
SReclaimable: 8652 kB
SUnreclaim: 17748 kB
KernelStack: 856 kB
PageTables: 556 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 254688 kB
Committed_AS: 43652 kB
VmallocTotal: 507904 kB
VmallocUsed: 7776 kB
VmallocChunk: 0 kB
Percpu: 256 kB
root@OpenWrt:~# cat /proc/cpuinfo
processor : 0
model name : ARMv7 Processor rev 1 (v7l)
BogoMIPS : 1600.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpd32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x4
CPU part : 0xc09
CPU revision : 1
processor : 1
model name : ARMv7 Processor rev 1 (v7l)
BogoMIPS : 1600.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpd32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x4
CPU part : 0xc09
CPU revision : 1
Hardware : Marvell Armada 380/385 (Device Tree)
Revision : 0000
Serial : 0000000000000000
root@OpenWrt:~#