WRT1900ACS v2 - Back to linksys firmware

I have got openwrt on both partitions i have tried everything on the forum but when I use putty It says check image failed but force given metadata not found I am doing something wrong hope someone canhelp me I want to leve openwrt on one partition thank u

Which device?

sorry wrt1900acs v2

Have you tried what is described in the devicepage?

https://openwrt.org/toh/linksys/linksys_wrt1900acs#return_to_stock_firmware

1 Like

Did you try the steps described in the wiki? If that fails, it could be helpful if you posted the command you entered and its output.

yes that is what I have been doing I think it might be the image link I think doing it wrong thank u

cd /tmp && sysupgrade -F -n -v linksys 192.168.1.1 linksys is the name of the folder

Capture

For completeness,can you please share output from following items:

/proc/cpuinfo
/etc/board.json
dmesg

Thanks

"model": {
	"id": "armada-385-linksys-shelby",
	"name": "Linksys WRT1900ACS"
},
"led": {
	"wan": {
		"name": "WAN",
		"sysfs": "pca963x:shelby:white:wan",
		"type": "netdev",
		"device": "eth1",
		"mode": "link tx rx"
	},
	"usb1": {
		"name": "USB 1",
		"sysfs": "pca963x:shelby:white:usb2",
		"type": "usbport",
		"ports": [
			"usb1-port1"
		]
	},
	"usb2": {
		"name": "USB 2",
		"sysfs": "pca963x:shelby:white:usb3_1",
		"type": "usbport",
		"ports": [
			"usb2-port1",
			"usb3-port1"
		]
	},
	"usb2_ss": {
		"name": "USB 2 SS",
		"sysfs": "pca963x:shelby:white:usb3_2",
		"type": "usbport",
		"ports": [
			"usb3-port1"
		]
	}
},
"network": {
	"lan": {
		"ifname": "eth0.1",
		"protocol": "static"
	},
	"wan": {
		"ifname": "eth1.2",
		"protocol": "dhcp"
	}
},
"switch": {
	"switch0": {
		"enable": true,
		"reset": true,
		"ports": [
			{
				"num": 0,
				"role": "lan",
				"index": 4
			},
			{
				"num": 1,
				"role": "lan",
				"index": 3
			},
			{
				"num": 2,
				"role": "lan",
				"index": 2
			},
			{
				"num": 3,
				"role": "lan",
				"index": 1
			},
			{
				"num": 5,
				"device": "eth0",
				"need_tag": false,
				"want_untag": false
			},
			{
				"num": 4,
				"role": "wan"
			},
			{
				"num": 6,
				"device": "eth1",
				"need_tag": false,
				"want_untag": false
			}
		],
		"roles": [
			{
				"role": "lan",
				"ports": "0 1 2 3 5t",
				"device": "eth0.1"
			},
			{
				"role": "wan",
				"ports": "4 6t",
				"device": "eth1.2"
			}
		]
	}
}

}

Did you scp the file to your router first?
It looks like you’re mixing up a few steps.

1 Like

that is all I can find I did scp the router first

it seems like there is something missing

Thanks,
Can you also share the other 2 items?

Koen

I can not see them any whare

I have looked every where there not there

please run them as commands in the ssh/console:

cat /proc/cpuinfo
dmesg

Look at the wiki closer. There are 3 distinct steps, and you are mixing steps 2 and 3.
Just transfer the image to /tmp via SCP.
Then use:

sysupgrade -F -n -v /tmp/imagename.img

What you wrote originally:
cd /tmp && sysupgrade -F -n -v gem 192.168.1.1
is completely incorrect.

1 Like

login as: root
root@192.168.1.1's password:

BusyBox v1.28.4 () built-in shell (ash)


| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -| || | | || || |
|
_____|| |
||||___||| |____|
|
| W I R E L E S S F R E E D O M

OpenWrt 18.06.2, r7676-cddd7b4c77

root@OpenWrt:~# cat /proc/cpuinfo
processor : 0
model name : ARMv7 Processor rev 1 (v7l)
BogoMIPS : 1600.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpd32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x4
CPU part : 0xc09
CPU revision : 1

processor : 1
model name : ARMv7 Processor rev 1 (v7l)
BogoMIPS : 1600.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpd32
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x4
CPU part : 0xc09
CPU revision : 1

Hardware : Marvell Armada 380/385 (Device Tree)
Revision : 0000
Serial : 0000000000000000
root@OpenWrt:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.95 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7627-753531d)) #0 SMP Mon Jan 28 08:54:32 2019
[ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Linksys WRT1900ACS
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat c0931000, node_mem_map dfbf9000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 131072 pages, LIFO batch:31
[ 0.000000] random: get_random_bytes called from 0xc08008d0 with crng_init=0
[ 0.000000] percpu: Embedded 12 pages/cpu @dfbd0000 s18956 r8192 d22004 u49152
[ 0.000000] pcpu-alloc: s18956 r8192 d22004 u49152 alloc=124096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock7 ro rootdelay=1 rootfstype=jffs2 earlyprintk mtdparts=armada-nand:2048K(uboot)ro,256K(u_env),256K(s_env),1m@9m(devinfo),40m@10m(kernel),34m@16m(rootfs),40m@50m(alt_kernel),34m@56m(alt_rootfs),80m@10m(ubifs),-@90m(syscfg)
[ 0.000000] Bootloader command line (ignored): console=ttyS0,115200 root=/dev/mtdblock7 ro rootdelay=1 rootfstype=jffs2 earlyprintk mtdparts=armada-nand:2048K(uboot)ro,256K(u_env),256K(s_env),1m@9m(devinfo),40m@10m(kernel),34m@16m(rootfs),40m@50m(alt_kernel),34m@56m(alt_rootfs),80m@10m(ubifs),-@90m(syscfg)
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 510920K/524288K available (6144K kernel code, 198K rwdata, 812K rodata, 1024K init, 232K bss, 13368K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0700000 (7136 kB)
[ 0.000000] .init : 0xc0800000 - 0xc0900000 (1024 kB)
[ 0.000000] .data : 0xc0900000 - 0xc0931900 ( 199 kB)
[ 0.000000] .bss : 0xc0931900 - 0xc096b9d8 ( 233 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 D prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[ 0.000006] sched_clock: 64 bits at 800MHz, resolution 1ns, wraps every 4398046511103ns
[ 0.000015] clocksource: arm_global_timer: mask: 0xffffffffffffffff max_cycles: 0xb881274fa3, max_idle_ns: 440795210636 ns
[ 0.000028] Switching to timer-based delay loop, resolution 1ns
[ 0.000141] Ignoring duplicate/late registration of read_current_timer delay
[ 0.000148] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[ 0.000279] Calibrating delay loop (skipped), value calculated using timer frequency.. 1600.00 BogoMIPS (lpj=8000000)
[ 0.000287] pid_max: default: 32768 minimum: 301
[ 0.000338] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000343] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000552] CPU: Testing write buffer coherency: ok
[ 0.000563] CPU0: Spectre v2: using BPIALL workaround
[ 0.000660] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.000767] Setting up static identity map for 0x100000 - 0x100060
[ 0.000835] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[ 0.000906] mvebu-pmsu: Initializing Power Management Service Unit
[ 0.000948] Hierarchical SRCU implementation.
[ 0.001119] smp: Bringing up secondary CPUs ...
[ 0.001232] Booting CPU 1
[ 0.001378] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.001380] CPU1: Spectre v2: using BPIALL workaround
[ 0.001423] smp: Brought up 1 node, 2 CPUs
[ 0.001427] SMP: Total of 2 processors activated (3200.00 BogoMIPS).
[ 0.001431] CPU: All CPU(s) started in SVC mode.
[ 0.002911] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.002958] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.002966] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.003012] pinctrl core: initialized pinctrl subsystem
[ 0.003319] NET: Registered protocol family 16
[ 0.003825] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.004453] cpuidle: using governor ladder
[ 0.004611] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[ 0.004617] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[ 0.010167] reg-fixed-voltage usb3_1-vbus: could not find pctldev for node /soc/internal-regs/pinctrl@18000/usb3_1-vbus-pins, deferring probe
[ 0.010311] SCSI subsystem initialized
[ 0.010467] libata version 3.00 loaded.
[ 0.010570] usbcore: registered new interface driver usbfs
[ 0.010601] usbcore: registered new interface driver hub
[ 0.010632] usbcore: registered new device driver usb
[ 0.011273] clocksource: Switched to clocksource arm_global_timer
[ 0.011599] NET: Registered protocol family 2
[ 0.011839] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.011862] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.011894] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.011927] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.011941] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.012003] NET: Registered protocol family 1
[ 0.012016] PCI: CLS 0 bytes, default 64
[ 0.012916] Crashlog allocated RAM at address 0x3f00000
[ 0.013097] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[ 0.014521] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.014526] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.016438] io scheduler noop registered
[ 0.016445] io scheduler deadline registered (default)
[ 0.016862] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[ 0.017782] mvebu-pcie soc:pcie: PCI host bridge to bus 0000:00
[ 0.017790] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
[ 0.017796] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[ 0.017801] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.017817] pci 0000:00:01.0: [11ab:6820] type 01 class 0x060400
[ 0.017904] pci 0000:00:02.0: [11ab:6820] type 01 class 0x060400
[ 0.017972] PCI: bus0: Fast back to back transfers disabled
[ 0.017978] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.017985] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.018031] pci 0000:01:00.0: [11ab:2a55] type 00 class 0x020000
[ 0.018054] pci 0000:01:00.0: reg 0x10: [mem 0x40000000-0x400fffff 64bit pref]
[ 0.018065] pci 0000:01:00.0: reg 0x18: [mem 0x40100000-0x401fffff 64bit pref]
[ 0.018123] pci 0000:01:00.0: supports D1 D2
[ 0.018126] pci 0000:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.018180] PCI: bus1: Fast back to back transfers disabled
[ 0.018187] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 0.018234] pci 0000:02:00.0: [11ab:2a55] type 00 class 0x020000
[ 0.018263] pci 0000:02:00.0: reg 0x10: [mem 0x42000000-0x420fffff 64bit pref]
[ 0.018274] pci 0000:02:00.0: reg 0x18: [mem 0x42100000-0x421fffff 64bit pref]
[ 0.018353] pci 0000:02:00.0: supports D1 D2
[ 0.018356] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.018411] PCI: bus2: Fast back to back transfers disabled
[ 0.018418] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[ 0.018434] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe01fffff]
[ 0.018440] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0200000-0xe03fffff]
[ 0.018447] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit pref]
[ 0.018457] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0100000-0xe01fffff 64bit pref]
[ 0.018466] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.018472] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe01fffff]
[ 0.018479] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0200000-0xe02fffff 64bit pref]
[ 0.018490] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0300000-0xe03fffff 64bit pref]
[ 0.018500] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.018505] pci 0000:00:02.0: bridge window [mem 0xe0200000-0xe03fffff]
[ 0.018714] mv_xor f1060800.xor: Marvell shared XOR driver
[ 0.061723] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.061825] mv_xor f1060900.xor: Marvell shared XOR driver
[ 0.121680] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.121820] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.122429] console [ttyS0] disabled
[ 0.142501] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 22, base_baud = 12500000) is a 16550A
[ 0.916926] console [ttyS0] enabled
[ 0.921949] loop: module loaded
[ 0.925389] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 0.934488] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 0.943632] scsi host0: ahci-mvebu
[ 0.947173] scsi host1: ahci-mvebu
[ 0.950655] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41
[ 0.958618] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41
[ 0.966937] pxa3xx-nand f10d0000.flash: This platform can't do DMA on this device
[ 0.974714] nand: device found, Manufacturer ID: 0x01, Chip ID: 0xf1
[ 0.981093] nand: AMD/Spansion S34ML01G2
[ 0.985040] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.992653] pxa3xx-nand f10d0000.flash: ECC strength 16, ECC step size 2048
[ 0.999828] Bad block table found at page 65472, version 0x01
[ 1.005937] Bad block table found at page 65408, version 0x01
[ 1.011883] nand_read_bbt: bad block at 0x000003180000
[ 1.017041] nand_read_bbt: bad block at 0x0000031a0000
[ 1.022295] 10 fixed-partitions partitions found on MTD device pxa3xx_nand-0
[ 1.029371] Creating 10 MTD partitions on "pxa3xx_nand-0":
[ 1.034889] 0x000000000000-0x000000200000 : "u-boot"
[ 1.040098] 0x000000200000-0x000000240000 : "u_env"
[ 1.045183] 0x000000240000-0x000000280000 : "s_env"
[ 1.050255] 0x000000900000-0x000000a00000 : "devinfo"
[ 1.055508] 0x000000a00000-0x000003200000 : "kernel1"
[ 1.060844] 0x000001000000-0x000003200000 : "rootfs1"
[ 1.066168] 0x000003200000-0x000005a00000 : "kernel2"
[ 1.071517] 0x000003800000-0x000005a00000 : "ubi"
[ 1.076488] 0x000005a00000-0x000008000000 : "syscfg"
[ 1.081748] 0x000000280000-0x000000900000 : "unused_area"
[ 1.087656] libphy: Fixed MDIO Bus: probed
[ 1.092080] libphy: orion_mdio_bus: probed
[ 1.096351] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[ 1.105091] mvneta f1070000.ethernet eth0: Using hardware mac address 60:38:e0:d8:5d:0f
[ 1.114395] mvneta f1034000.ethernet eth1: Using random mac address ea:35:32:91:80:aa
[ 1.122415] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.128970] ehci-pci: EHCI PCI platform driver
[ 1.133466] ehci-platform: EHCI generic platform driver
[ 1.138776] ehci-orion: EHCI orion driver
[ 1.142891] orion-ehci f1058000.usb: EHCI Host Controller
[ 1.148322] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[ 1.155971] orion-ehci f1058000.usb: irq 38, io mem 0xf1058000
[ 1.191255] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[ 1.197408] hub 1-0:1.0: USB hub found
[ 1.201185] hub 1-0:1.0: 1 port detected
[ 1.205557] usbcore: registered new interface driver usb-storage
[ 1.211753] i2c /dev entries driver
[ 1.226542] (NULL device ): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 1.238968] orion_wdt: Initial timeout 171 sec
[ 1.243667] sdhci: Secure Digital Host Controller Interface driver
[ 1.249872] sdhci: Copyright(c) Pierre Ossman
[ 1.254341] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.263585] marvell-cesa f1090000.crypto: CESA device successfully registered
[ 1.271155] NET: Registered protocol family 10
[ 1.276056] Segment Routing with IPv6
[ 1.279760] NET: Registered protocol family 17
[ 1.284247] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.297367] 8021q: 802.1Q VLAN Support v1.8
[ 1.297564] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.301630] Registering SWP/SWPB emulation handler
[ 1.307020] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.318795] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 1.324162] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
[ 1.331753] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x0000000000010010
[ 1.341032] xhci-hcd f10f8000.usb3: irq 43, io mem 0xf10f8000
[ 1.347032] hub 2-0:1.0: USB hub found
[ 1.350811] hub 2-0:1.0: 1 port detected
[ 1.354884] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 1.360222] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
[ 1.367752] xhci-hcd f10f8000.usb3: Host supports USB 3.0 SuperSpeed
[ 1.374255] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.382552] hub 3-0:1.0: USB hub found
[ 1.386333] hub 3-0:1.0: 1 port detected
[ 1.390619] UBI: auto-attach mtd7
[ 1.393964] ubi0: attaching mtd7
[ 1.404594] random: fast init done
[ 1.491147] ubi0: scanning is finished
[ 1.499163] ubi0: attached mtd7 (name "ubi", size 34 MiB)
[ 1.504593] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 1.511501] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 1.518317] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 1.525311] ubi0: good PEBs: 272, bad PEBs: 0, corrupted PEBs: 0
[ 1.531344] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 1.538595] ubi0: max/mean erase counter: 11/5, WL threshold: 4096, image sequence number: 1699562896
[ 1.547855] ubi0: available PEBs: 0, total reserved PEBs: 272, PEBs reserved for bad PEB handling: 20
[ 1.557120] ubi0: background thread "ubi_bgt0d" started, PID 696
[ 1.557503] block ubiblock0_0: created from ubi0:0(rootfs)
[ 1.568668] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
[ 1.575848] mvsw61xx 10.mvsw61xx: Found MV88E6176 at f1072004.mdio-mii:10
[ 1.582674] mvsw61xx 10.mvsw61xx: Using direct addressing
[ 1.597851] hctosys: unable to open rtc device (rtc0)
[ 1.603266] Waiting 1 sec before mounting root device...
[ 2.633122] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 2.640827] Freeing unused kernel memory: 1024K
[ 2.846703] init: Console is alive
[ 2.850184] init: - watchdog -
[ 3.023356] kmodloader: loading kernel modules from /etc/modules-boot.d/

[ 3.056976] kmodloader: done loading kernel modules from /etc/modules-boot.d/

[ 3.064862] init: - preinit -
[ 3.199876] mvneta f1070000.ethernet tmp0: renamed from eth0
[ 3.205765] random: procd: uninitialized urandom read (4 bytes read)
[ 3.262671] mvneta f1034000.ethernet eth0: renamed from eth1
[ 3.322600] mvneta f1070000.ethernet eth1: renamed from tmp0
[ 3.597173] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.614227] random: jshn: uninitialized urandom read (4 bytes read)
[ 3.790251] mvneta f1034000.ethernet eth0: configuring for fixed/sgmii link mode
[ 3.798104] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.804161] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 3.812075] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.893334] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 805
[ 6.921664] UBIFS (ubi0:1): recovery needed
[ 6.989120] UBIFS (ubi0:1): recovery completed
[ 6.993626] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 7.001495] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 7.011454] UBIFS (ubi0:1): FS size: 27934720 bytes (26 MiB, 220 LEBs), journal size 1396736 bytes (1 MiB, 11 LEBs)
[ 7.021934] UBIFS (ubi0:1): reserved for root: 1319425 bytes (1288 KiB)
[ 7.028577] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 499BE451-5CF6-4D26-BA3B-0C806676BC17, small LPT model
[ 7.041802] mount_root: switching to ubifs overlay
[ 7.089650] ubi1: attaching mtd8
[ 7.191666] ubi1: scanning is finished
[ 7.199762] ubi1: attached mtd8 (name "syscfg", size 38 MiB)
[ 7.205459] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 7.212382] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 7.219197] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 7.226191] ubi1: good PEBs: 296, bad PEBs: 8, corrupted PEBs: 0
[ 7.232225] ubi1: user volume: 1, internal volumes: 1, max. volumes count: 128
[ 7.239476] ubi1: max/mean erase counter: 19/10, WL threshold: 4096, image sequence number: 274456657
[ 7.248737] ubi1: available PEBs: 0, total reserved PEBs: 296, PEBs reserved for bad PEB handling: 12
[ 7.258004] ubi1: background thread "ubi_bgt1d" started, PID 815
[ 7.267856] UBIFS (ubi1:0): background thread "ubifs_bgt1_0" started, PID 819
[ 7.316189] UBIFS (ubi1:0): UBIFS: mounted UBI device 1, volume 0, name "syscfg"
[ 7.323625] UBIFS (ubi1:0): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 7.333586] UBIFS (ubi1:0): FS size: 34283520 bytes (32 MiB, 270 LEBs), journal size 1777664 bytes (1 MiB, 14 LEBs)
[ 7.344066] UBIFS (ubi1:0): reserved for root: 1619295 bytes (1581 KiB)
[ 7.350708] UBIFS (ubi1:0): media format: w4/r0 (latest is w5/r0), UUID C777AA93-99B9-4576-A776-96F5D777419C, small LPT model
[ 7.363725] urandom-seed: Seeding with /etc/urandom.seed
[ 7.399764] mvneta f1034000.ethernet eth0: Link is Down
[ 7.443446] procd: - early -
[ 7.446361] procd: - watchdog -
[ 8.067692] procd: - watchdog -
[ 8.070934] procd: - ubus -
[ 8.107356] urandom_read: 3 callbacks suppressed
[ 8.107359] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.124675] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.131133] random: ubusd: uninitialized urandom read (4 bytes read)
[ 8.137725] procd: - init -
[ 8.188566] random: crng init done
[ 8.191988] random: 1 urandom warning(s) missed due to ratelimiting
[ 8.247776] kmodloader: loading kernel modules from /etc/modules.d/*
[ 8.255283] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.262122] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180
[ 8.270161] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d
[ 8.283965] <<Marvell Mac80211 Wireless PCIE Network Driver version 10.3.8.0-20181114>>
[ 8.292041] pci 0000:00:01.0: enabling device (0140 -> 0142)
[ 8.297814] ieee80211 phy0: priv->pcmd_buf = dec84000 priv->pphys_cmd_buf = 1ec84000
[ 8.301317] ieee80211 phy0: fw download start
[ 8.417998] ieee80211 phy0: FwSize = 118776 downloaded Size = 118776 curr_iteration 65496
[ 9.387253] ieee80211 phy0: fw download complete
[ 9.387265] ieee80211 phy0: device node: /soc/pcie/pcie@1,0
[ 9.393382] ieee80211 phy0: pcmd = dec84000
[ 9.410268] ieee80211 phy0: firmware version: 0x702091a
[ 9.761249] ieee80211 phy0: firmware region code: 81
[ 9.799887] ieee80211 phy0: 2G disabled, 5G enabled
[ 9.804800] ieee80211 phy0: 4 TX antennas, 4 RX antennas
[ 9.810277] pci 0000:00:02.0: enabling device (0140 -> 0142)
[ 9.816055] ieee80211 phy1: priv->pcmd_buf = ddcc4000 priv->pphys_cmd_buf = 1dcc4000
[ 9.821285] ieee80211 phy1: fw download start
[ 9.944102] ieee80211 phy1: FwSize = 118776 downloaded Size = 118776 curr_iteration 65510
[ 10.901254] ieee80211 phy1: fw download complete
[ 10.901278] ieee80211 phy1: device node: /soc/pcie/pcie@2,0
[ 10.907342] ieee80211 phy1: pcmd = ddcc4000
[ 10.925280] ieee80211 phy1: firmware version: 0x702091a
[ 11.277265] ieee80211 phy1: firmware region code: 81
[ 11.314024] ieee80211 phy1: 2G enabled, 5G disabled
[ 11.318941] ieee80211 phy1: 4 TX antennas, 4 RX antennas
[ 11.325431] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 11.332772] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[ 11.349209] xt_time: kernel timezone is -0000
[ 11.356474] PPP generic driver version 2.4.2
[ 11.361220] NET: Registered protocol family 24
[ 11.366600] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 12.630820] mvneta f1034000.ethernet eth0: configuring for fixed/sgmii link mode
[ 12.638368] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.644279] mvneta f1034000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 12.653307] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 12.662122] br-lan: port 1(eth0.1) entered blocking state
[ 12.667555] br-lan: port 1(eth0.1) entered disabled state
[ 12.673213] device eth0.1 entered promiscuous mode
[ 12.678028] device eth0 entered promiscuous mode
[ 12.684578] br-lan: port 1(eth0.1) entered blocking state
[ 12.690012] br-lan: port 1(eth0.1) entered forwarding state
[ 12.695724] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 12.706405] mvneta f1070000.ethernet eth1: configuring for fixed/rgmii-id link mode
[ 12.714672] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 12.720611] mvneta f1070000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 12.728833] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 13.671263] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
root@OpenWrt:~#