Hi,
I'm trying to make my own image for a WRT1900ACS v1 router, following Wiki instructions.
I got the image builder for my router, Openwrt-imagebuilder-19.07.7-mvebu-cortexa9.Linux-x86_64.tar.xz
and the list of packages is coming from my running install 19.07.7 by echo $(opkg list_installed | awk '{ print $1 }')
This is an existing standart install with a few additional packages such as wireguard, nano ...
I launch the following make command to build the image
make image PROFILE=linksys_wrt1900acs PACKAGES="base-files busybox cgi-io dnsmasq dropbear firewall fstools fwtool getrandom hostapd-common ip-tiny ip6tables iptables iptables-mod-conntrack-extra iptables-mod-ipopt iw iwinfo jshn jsonfilter kernel kmod-cfg80211 kmod-gpio-button-hotplug kmod-ifb kmod-ip6tables kmod-ipt-conntrack kmod-ipt-conntrack-extra kmod-ipt-core kmod-ipt-ipopt kmod-ipt-nat kmod-ipt-offload kmod-ipt-raw kmod-lib-crc-ccitt kmod-mac80211 kmod-mwlwifi kmod-nf-conntrack kmod-nf-conntrack6 kmod-nf-flow kmod-nf-ipt kmod-nf-ipt6 kmod-nf-nat kmod-nf-reject kmod-nf-reject6 kmod-ppp kmod-pppoe kmod-pppox kmod-sched-cake kmod-sched-core kmod-slhc kmod-udptunnel4 kmod-udptunnel6 kmod-wireguard libblobmsg-json libc libcap libelf1 libgcc1 libip4tc2 libip6tc2 libiwinfo-lua libiwinfo20181126 libjson-c2 libjson-script liblua5.1.5 liblucihttp-lua liblucihttp0 libmbedtls12 libmnl0 libncurses6 libnl-tiny libpthread libqrencode libubox20191228 libubus-lua libubus20191227 libuci20130104 libuclient20160123 libustream-mbedtls20150806 libxtables12 logd lua luci luci-app-advanced-reboot luci-app-firewall luci-app-opkg luci-app-sqm luci-app-wifischedule luci-app-wireguard luci-base luci-compat luci-lib-ip luci-lib-jsonc luci-lib-nixio luci-mod-admin-full luci-mod-network luci-mod-status luci-mod-system luci-proto-ipv6 luci-proto-ppp luci-proto-wireguard luci-ssl luci-theme-bootstrap mtd mwlwifi-firmware-88w8864 nano netifd odhcp6c odhcpd-ipv6only openwrt-keyring opkg ppp ppp-mod-pppoe procd px5g-mbedtls qrencode rpcd rpcd-mod-file rpcd-mod-iwinfo rpcd-mod-luci rpcd-mod-rrdns sqm-scripts swconfig tc terminfo ubi-utils uboot-envtools ubox ubus ubusd uci uclient-fetch uhttpd urandom-seed urngd usign wifischedule wireguard wireguard-tools wireless-regdb wpad-basic zlib"
But the building process fail on
Downloading http://downloads.openwrt.org/releases/19.07.7/targets/mvebu/cortexa9/packages/mtd_24_arm_cortex-a9_vfpv3-d16.ipk
Unknown package 'mwlwifi-firmware-88w8864'.
I am probably doing something wrong, can you help ?
Thanks