WRT1200AC Failed command: iw phy phy0 set antenna all all

Mon May  4 12:37:11 2020 user.notice mac80211: Failed command: iw phy phy0 set antenna all all
Mon May  4 12:37:11 2020 daemon.notice netifd: radio0 (1751): command failed: Not supported (-95)
Mon May  4 12:37:11 2020 user.notice mac80211: Failed command: iw phy phy0 set distance 0
Mon May  4 12:37:11 2020 user.notice mac80211: Failed command: iw phy phy1 set antenna all all
Mon May  4 12:37:11 2020 user.notice mac80211: Failed command: iw phy phy1 set distance 0
Mon May  4 12:37:11 2020 daemon.notice netifd: radio1 (1753): command failed: Not supported (-95)
Mon May  4 12:37:12 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy0.conf
Mon May  4 12:37:12 2020 daemon.err hostapd: Configuration file: /var/run/hostapd-phy1.conf

what values should be for that error for wrt1200ac ?

and second why its daemon.err with hostapd instead of daemon.warn or what error does that deamon see ?

root@OpenWrt:~# cat /var/run/hostapd
hostapd-phy0.conf hostapd/
root@OpenWrt:~# cat /var/run/hostapd-phy0.conf
driver=nl80211
logger_syslog=127
logger_syslog_level=2
logger_stdout=127
logger_stdout_level=2
country_code=PL
ieee80211d=1
ieee80211h=1
hw_mode=a
beacon_int=100
channel=36
ieee80211n=1
ht_coex=0
ht_capab=[HT40+][LDPC][SHORT-GI-20][SHORT-GI-40][DSSS_CCK-40]
vht_oper_chwidth=1
vht_oper_centr_freq_seg0_idx=42
ieee80211ac=1
vht_capab=[RXLDPC][SHORT-GI-80][SU-BEAMFORMER][SU-BEAMFORMEE][RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN][RX-STBC-1][MAX-A-MPDU-LEN-EXP7]
interface=wlan0
ctrl_interface=/var/run/hostapd
ap_isolate=1
bss_load_update_period=60
chan_util_avg_period=600
disassoc_low_ack=1
preamble=1
wmm_enabled=1
ignore_broadcast_ssid=0
uapsd_advertisement_enabled=1
wpa_passphrase=TOPSECRET
auth_algs=1
wpa=2
wpa_pairwise=CCMP
ssid=OpenWrt
bridge=br-lan
wpa_disable_eapol_key_retries=0
wpa_key_mgmt=WPA-PSK
okc=0
disable_pmksa_caching=1
bssid=c2:56:XX:XX:XX:XX
root@OpenWrt:~#