wr841HP v5 support?

frollic · 2024-08-21T18:55:32.481Z

0penWRT:

sysupgrade

tried running ^ without any additional params, to get the online help.

0penWRT · 2024-08-21T18:58:47.472Z

Ok if i understand i will now,thak you sir.


My try would be these fw
Firmware OpenWrt Upgrade URL:

[http://downloads.openwrt.org/releases/21.02.0/targets/ramips/mt76x8/openwrt-21.02.0-ramips-mt76x8-tplink_tl-wr841n-v13-squashfs-sysupgrade.bin ](http://downloads.openwrt.org/releases/21.02.0/targets/ramips/mt76x8/openwrt-21.02.0-ramips-mt76x8-tplink_tl-wr841n-v13-squashfs-sysupgrade.bin)

with name (3 trys same file)
1 openwrt-21.02.0-ramips-mt76x8-tplink_tl-wr841n-v13-squashfs-sysupgrade.bin
2 sysupgrade.bin
3 sysupgrade

0penWRT · 2024-08-21T19:37:25.886Z

I will try now

Firmware OpenWrt Install URL:

Firmware OpenWrt Install URL:

http://downloads.openwrt.org/releases/21.02.0/targets/ramips/mt76x8/openwrt-21.02.0-ramips-mt76x8-tplink_tl-wr841n-v13-squashfs-tftp-recovery.bin

i do like that and now flash was been all led procedures was been but no changes at all
Last didnt flash 
Putty:
BusyBox v1.36.1 (2024-08-18 07:55:46 UTC) built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt SNAPSHOT, r27161-8d25723865
 -----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@OpenWrt:~# sysupgrade /tmp/tl-wr841hpv5-squashfs-sysupgrade.bin
Sun Aug 18 08:02:10 UTC 2024 upgrade: Image metadata not present
Sun Aug 18 08:02:10 UTC 2024 upgrade: Use sysupgrade -F to override this check when downgrading or flashing to vendor firmware
Image check failed.
root@OpenWrt:~# sysupgrade /tmp/tl-wr841hpv5-squashfs-sysupgrade
Sun Aug 18 08:02:23 UTC 2024 upgrade: Image metadata not present
Sun Aug 18 08:02:23 UTC 2024 upgrade: Use sysupgrade -F to override this check when downgrading or flashing to vendor firmware
Image check failed.
root@OpenWrt:~# sysupgrade -F /tmp/tl-wr841hpv5-squashfs-sysupgrade
Sun Aug 18 08:02:34 UTC 2024 upgrade: Image metadata not present
Image check failed but --force given - will update anyway!
Sun Aug 18 08:02:37 UTC 2024 upgrade: Saving config files...
Sun Aug 18 08:02:40 UTC 2024 upgrade: Commencing upgrade. Closing all shell sessions.

frollic · 2024-08-21T19:43:58.419Z

0penWRT:

openwrt-21.02.0-ramips-mt76x8-tplink_tl-wr841n-v13-squashfs-tftp-recovery.bin

Guess @slh's helpful post was too long to read ?

0penWRT · 2024-08-21T20:04:14.105Z

Sorry i forgot i will now add sysupgrade in filename i now remember that sorry i try now

lleachii · 2024-08-21T20:05:55.324Z

0penWRT:

i will now add sysupgrade in filename

frollic:

was too long to read ?

I guess it was too long to read.

mk24:

Not the tftp-recovery files that you keep trying to upgrade with. That will not work. If you are using the correct file, the -F option will not be needed.

Download and use the sysupgrade file - DO NOT rename and use the tftp flle.

0penWRT · 2024-08-21T20:06:48.579Z

Is correct file can be renamed from recovery file firmvare to sysupgrade in file name or only can be used files of firmvers with name in sysupgrade ? plase help

lleachii · 2024-08-21T20:07:25.878Z

0penWRT:

Is correct file can be renamed from recovery file firmvare to sysupgrade

0penWRT:

of firmvers with name in sysupgrade ? plase help

Really?

wr841HP v5 support? Installing and Using OpenWrt

I guess it was too long to read. Download and use the sysupgrade file - DO NOT rename and use the tftp flle.

https://downloads.openwrt.org/releases/21.02.0/targets/ramips/mt76x8/openwrt-21.02.0-ramips-mt76x8-tplink_tl-wr841n-v13-squashfs-sysupgrade.bin

0penWRT:

Firmware OpenWrt Upgrade URL:

http://downloads.openwrt.org/releases/21.02.0/targets/ramips/mt76x8/openwrt-21.02.0-ramips-mt76x8-tplink_tl-wr841n-v13-squashfs-sysupgrade.bin

0penWRT · 2024-08-21T20:09:17.190Z

[quote="0penWRT, post:46, topic:110118"]
Firmware OpenWrt Upgrade URL:

http://downloads.openwrt.org/releases/21.02.0/targets/ramips/mt76x8/openwrt-21.02.0-ramips-mt76x8-tplink_tl-wr841n-v13-squashfs-sysupgrade.bin
[/quote]

Ok i got it i don rename i use file name sam as download 

Firmware OpenWrt Upgrade URL:
name:openwrt-21.02.0-ramips-mt76x8-tplink_tl-wr841n-v13-squashfs-sysupgrade.bin

0penWRT · 2024-08-21T20:09:55.983Z

i don rename at all

0penWRT · 2024-08-21T20:10:17.837Z

Ok i tr now that

frollic · 2024-08-21T20:11:13.189Z

The original file name is important, so you know you got the right one, but if you want to name it tiny.dick.img instead, before you run sysupgrade, then go ahead.

0penWRT · 2024-08-21T20:14:25.642Z

Thanks for advice(from now on i dont rename firmver original names without VERRY need) just as read. Thank you sir. I try now like i readed

0penWRT · 2024-08-21T21:05:28.854Z

First time i go these on putty:



login as: root


BusyBox v1.36.1 (2024-08-18 07:55:46 UTC) built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt SNAPSHOT, r27161-8d25723865
 -----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@OpenWrt:~# sysupgrade -r /tmp/openwrt-21.02.0-ramips-mt76x8-tplink_tl-wr841
n-v13-squashfs-sysupgrade.bin
Backup archive '/tmp/openwrt-21.02.0-ramips-mt76x8-tplink_tl-wr841n-v13-squashfs-sysupgrade.bin' not found.
root@OpenWrt:~# write /tmp/openwrt-21.02.0-ramips-mt76x8-tplink_tl-wr841n-v13-sq
uashfs-sysupgrade.bin
-ash: write: not found
root@OpenWrt:~# sysupgrade -F /tmp/openwrt-21.02.0-ramips-mt76x8-tplink_tl-wr841
n-v13-squashfs-sysupgrade.bin
Sun Aug 18 08:25:40 UTC 2024 upgrade: Image metadata not present
Image check failed but --force given - will update anyway!
Sun Aug 18 08:25:43 UTC 2024 upgrade: Saving config files...
Sun Aug 18 08:25:46 UTC 2024 upgrade: Commencing upgrade. Closing all shell sessions.
Command failed: Connection failed
root@OpenWrt:~#

i didnt have ui access on mobile or pc

Second time i go putty:


login as: root


BusyBox v1.36.1 (2024-08-18 07:55:46 UTC) built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt SNAPSHOT, r27161-8d25723865
 -----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@OpenWrt:~# sysupgrade -r /tmp/openwrt-21.02.0-ramips-mt76x8-tplink_tl-wr841
n-v13-squashfs-sysupgrade.bin
Backup archive '/tmp/openwrt-21.02.0-ramips-mt76x8-tplink_tl-wr841n-v13-squashfs-sysupgrade.bin' not found.
root@OpenWrt:~# sysupgrade -v /tmp/openwrt-21.02.0-ramips-mt76x8-tplink_tl-wr841
n-v13-squashfs-sysupgrade.bin
Sun Aug 18 08:11:37 UTC 2024 upgrade: Image metadata not present
Sun Aug 18 08:11:37 UTC 2024 upgrade: Use sysupgrade -F to override this check when downgrading or flashing to vendor firmware
Image check failed.
root@OpenWrt:~# sysupgrade -F /tmp/openwrt-21.02.0-ramips-mt76x8-tplink_tl-wr841
n-v13-squashfs-sysupgrade.bin
Sun Aug 18 08:11:48 UTC 2024 upgrade: Image metadata not present
Image check failed but --force given - will update anyway!
Sun Aug 18 08:11:51 UTC 2024 upgrade: Saving config files...
Sun Aug 18 08:11:54 UTC 2024 upgrade: Commencing upgrade. Closing all shell sessions.
Command failed: Connection failed
root@OpenWrt:~#

no changes also it was there led and reboot procedure like its on new fw go on but no

i think i need mtd write code i get these errors when i was try and yes can i do that fithout force please

I need some mtd way i need more to research why do i get on putty information backup:firmver.bin that i flash
and file not found error

0penWRT · 2024-08-21T21:10:10.283Z

If i fail i do these for learn and for future if i make i be verry glad that i did succeded with you buddes

0penWRT · 2024-08-21T21:18:39.761Z

I found why mtd says error its these post

Couldn't open image file: trying to flash to openwrt Installing and Using OpenWrt

I have a Ubiquiti AP AC Lite. I download the appropriate new firmware 19.07.1. I had to reflash my AP to 3.7.58 so that I could use mdt. I can scp my bin to the AP. Then, when I try to: mtd write /tmp/openwrt-19.07.1-ath79-generic-ubnt-unifiac-lite-squas hfs-sysupgrade.bin kernel0 I get: Couldn't open image file: /tmp/openwrt-19.07.1-ath79-generic-ubnt-unifiac-lite-squashfs-sysupgrade.bin! Any ideas??

0penWRT · 2024-08-21T21:20:21.647Z

login as: root


BusyBox v1.36.1 (2024-08-18 07:55:46 UTC) built-in shell (ash)

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 OpenWrt SNAPSHOT, r27161-8d25723865
 -----------------------------------------------------
=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.
--------------------------------------------------
root@OpenWrt:~# mtd write /tmp/openwrt-21.02.0-ramips-mt76x8-tplink_tl-wr841n-v1
3-squashfs-sysupgrade.bin linux && reboot
Couldn't open image file: /tmp/openwrt-21.02.0-ramips-mt76x8-tplink_tl-wr841n-v13-squashfs-sysupgrade.bin!
root@OpenWrt:~#

0penWRT · 2024-08-21T21:21:13.949Z

am not clear now at all its defoult file name

0penWRT · 2024-08-21T21:23:33.558Z

i go like:tplink_tl-wr841n-v13-squashfs-sysupgrade.bin

0penWRT · 2024-08-21T21:34:37.534Z

i type:

root@OpenWrt:~# mtd write /tmp/tplink_tl-wr841n-v13-squashfs-sysupgrade.bin linux && reboot
Couldn't open image file: /tmp/openwrt-21.02.0-ramips-mt76x8-tplink_tl-wr841n-v13-squashfs-sysupgrade.bin!
root@OpenWrt:~#
login as: root

Couldn't open image file whats wrong?