wr841HP v5 support?

is there snapshot lede or openwrt or anyhow to install openwrt no matter if there is no update just need one ok openwrt os for tplink router model wr841Hp v5 version5

1 Like

thank you verry much

i have to say just is it safe (dont brick) and tested ?
where is download link am fraid to download wrong firmvare ser

it's never safe to use the image from a different router for your own device.
you will not get any better "confirmation", since the device isn't actually supported.

does anybody installed and installation pasted with no brick?

your forum (or google) search skills are probably just as good as mine ...

am short with time sorry

i have much job in autumn sorry

is that mean that i cant webrevert to stock that openwrt

most likely you'll be able to revert via tftp - definitely not via web interface see https://openwrt.org/toh/tp-link/tl-wr841nd?s[]=v13#go_back_to_original_firmware

1 Like

ok thanks for that i readed text about and i dont see feedback does flashing succeded can anybody tell me?

its ok if be stocked on openwrt i want so like that but i just wanna know did it work maurer did fw from TL-WR841N v13 worked?

here what writes on back of the router

I can confirm that openwrt works in wr841Hp v5 but you must bear in mind that it will not be able to return to stock firmware neither by web nor tftp


great works i will install openwrt can you give me direct link what fimvear i need and thank you edwpat

ok its these site https://openwrt.org/toh/hwdata/tp-link/tp-link_tl-wr841n_v13 so please tell me what to instal what fw will be more with options and software of these down
Firmware OpenWrt Install URL:


Firmware OpenWrt Upgrade URL:


Firmware OpenWrt snapshot Install URL:


Firmware OpenWrt snapshot Upgrade URL:


snapshots are betas, sysupgrades are (usually) for devices already running Openwrt.

i tryed these didnt work Firmware OpenWrt snapshot Install URL:

http://downloads.openwrt.org/snapshots/targets/ramips/mt76x8/openwrt-ramips-mt76x8-tplink_tl-wr841n-v13-squashfs-tftp-recovery.bin i put in ui openwrt bin and click upgrade current stock firmver says me that is not posibile something like that on ip address of router

A tftp-recovery.bin image is not meant to be flashed via OEM GUI, but via TFTP, hence the name.

1 Like

its reasky i dont wanna via tftp to flash looks like i will be wait over ui flash openwrt