WR1043ND 2.1 No work

[madeskjet]

Model: TL-WR1043N

Hardware Version: V2

Firmware Version: Factory but...I don't know

Hi!

Before to start install OpenWRT...Power on and...

LED POWER = ON
SYSTEM = OFF (The router has a error system).
WIRELESS = FLASHING (The wireless function is enabled).

My router keep it last configuration. SSID, DHCP off...

I've tried keep Reset button five seconds but...no work.

30/30/30...not work.

Any idea?

Thanks

[lleachii]

@madeskjet, welcome to the community!

@madeskjet

(The router has a error system).

Can you describe what this means?

@madeskjet

My router keep it last configuration. SSID, DHCP off...

Then you're not on OpenWrt.

@madeskjet

30/30/30...not work.

No such thing in most modern routers.

@madeskjet

Any idea?

• Why don't you browse to the router's web GUI?
• Have you seen: https://openwrt.org/toh/tp-link/tl-wr1043nd#installation

[madeskjet]

@lleachii, Hi!

Switch ON router and LEDs:
LED POWER = ON
SYSTEM = OFF (The router has a error system).
WIRELESS = FLASHING (The wireless function is enabled).

Manual WR1043ND 2.1 (1.4.1 The Front Panel)

No, I've factory firmware. When I recovery login router I will try install OpenWrt.

Thanks!

[lleachii]

• You didn't describe what "error system" means
• This is an OpenWrt forum, I'm not sure why you posted the OEM manual
• If you have an issue with the router, I advise you return it for a refund

@madeskjet

No, I've factory firmware. When I recovery login router I will try install OpenWrt.

Thanks!

If your problem is solved, feel free to mark the relevant post as the solution; and edit the title to add "[SOLVED]" to the beginning (click the pencil behind the topic).