Hello, lovely PEEPS around the globe I need some suggestions here;
So I have Linksys WRT3200ACM router. I made some changes to 5ghz (radio0)due to unstable& dropping connection during the online games. once I made these new changes the wifi for 5ghz is playing up meaning its not letting me authenticate even if it lets me connect after a couple of seconds it drops the connection and it dosnt let me connect again. all my devices support WP3 Encryption.
Firmware Version 23.05.5
root@OpenWrt:~# uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0. transmit power driver default
wireless.radio0.path='soc/soc:pcie/pci0000:00/0000:00:01.0/0000:01:00.0'
wireless.radio0.channel='48'
wireless.radio0.band='5g'
wireless.radio0.htmode='VHT40'
wireless.radio0.country='GB'
wireless.radio0.cell_density='0'
wireless.radio0.beacon_int='200'
wireless.default_radio0=wifi-iface
wireless.default_radio0.device='radio0'
wireless.default_radio0.network='lan'
wireless.default_radio0.mode='ap'
wireless.default_radio0.ssid='OpenWrt5'
wireless.default_radio0.encryption='sae'
wireless.default_radio0.macaddr='*****'
wireless.default_radio0.key=''
wireless.default_radio0.dtim_period='1'
changes made
wireless.radio0.channel='40'
wireless.radio0.htmode='VHT80'
wireless.radio0.beacon_int='200'
wireless.default_radio0.dtim_period='1'
wireless.default_radio0.encryption='sae-mixed' # Enable WPA3]
these were the config before and it was working fine.
changes I made were:
Mode AP
Channel to 149Mhz
and width to 80mhz
encryption wpa2-PSK
DTIM interval 2
Beacon Interval to 100
If i apply this config to radio 1 which is 2.4ghz it doesn't work on that either.
Any suggestion
