Hi,
I just recently installed LEDE on my tl-wdr3600 acting as an AP, and while setting up the 2 wireless radios, I'm not exactly sure what is meant by "Legacy" and "N", and specifically which standard(s) they cover; B, G, N, combination of, etc.?
If possible, I'd like to utilize both G and N; which I remember my 2.4ghz radio being able to do before; NG-Mixed.
Could someone kindly explain and advise?
Thanks,
Jamar666
Setting to n operates at b/g/n. Legacy is b/g only.
okay, thanks!
just started to check out the cli - does this seem about right?
it doesn't look as if any clients are connecting to this AP at all, even though the major settings seems to be the same - WPA2 + AES, same ssid and password, same channels as before, and the "wpa_disable_eapol_key_retries" enabled (tried both enabled and disabled with no change).
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.channel='11'
wireless.radio0.hwmode='11g'
wireless.radio0.path='platform/ar934x_wmac'
wireless.radio0.country='CA'
wireless.radio0.htmode='HT40'
wireless.default_radio0=wifi-iface
wireless.default_radio0.device='radio0'
wireless.default_radio0.mode='ap'
wireless.default_radio0.network='lan'
wireless.default_radio0.ssid='#####'
wireless.default_radio0.encryption='psk2+aes'
wireless.default_radio0.key='#####'
wireless.default_radio0.wpa_disable_eapol_key_retries='1'
wireless.radio1=wifi-device
wireless.radio1.type='mac80211'
wireless.radio1.hwmode='11a'
wireless.radio1.path='pci0000:00/0000:00:00.0'
wireless.radio1.channel='161'
wireless.radio1.country='CA'
wireless.radio1.htmode='HT40'
wireless.default_radio1=wifi-iface
wireless.default_radio1.device='radio1'
wireless.default_radio1.mode='ap'
wireless.default_radio1.network='lan'
wireless.default_radio1.ssid='#####'
wireless.default_radio1.encryption='psk2+aes'
wireless.default_radio1.key='#####'
wireless.default_radio1.wpa_disable_eapol_key_retries='1'
Thanks,
Jamar666
hmm, rebooted my other two APs at the same time, and now it looks like i have a few connected to my tl-wdr3600 AP.
i guess the clients were just sticky to those other two APs.
Jamar666