Wireless kernel error with Cudy WR1300

Hey!

I have a Cudy WR1300 running OpenWRT 22.03.1 (the official build - not from the manufacturer) and cannot setup wireless..

There is a stack trace regarding wireless (at 12.747414) in the kernel messages, but I do not know how to fix it:

[    0.000000] Linux version 5.10.146 (builder@buildhost) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r19777-2853b6d652) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Fri Oct 7 23:34:56 2022
[    0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
[    0.000000] printk: bootconsole [early0] enabled
[    0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
[    0.000000] MIPS: machine is Cudy WR1300
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] VPE topology {2,2} total 4
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
[    0.000000] On node 0 totalpages: 32768
[    0.000000]   Normal zone: 288 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 32768 pages, LIFO batch:7
[    0.000000] percpu: Embedded 15 pages/cpu s30256 r8192 d22992 u61440
[    0.000000] pcpu-alloc: s30256 r8192 d22992 u61440 alloc=15*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 32480
[    0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    0.000000] Writing ErrCtl register=00020a10
[    0.000000] Readback ErrCtl register=00020a10
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 119536K/131072K available (7005K kernel code, 625K rwdata, 824K rodata, 1260K init, 243K bss, 11536K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000]  Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 256
[    0.000000] CPU Clock: 880MHz
[    0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
[    0.000013] sched_clock: 64 bits at 880MHz, resolution 1ns, wraps every 4398046511103ns
[    0.007944] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
[    0.017000] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
[    0.083160] pid_max: default: 32768 minimum: 301
[    0.087923] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.095125] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.105729] rcu: Hierarchical SRCU implementation.
[    0.110765] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
[    0.118853] smp: Bringing up secondary CPUs ...
[    0.124125] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.124137] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.124149] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.124226] CPU1 revision is: 0001992f (MIPS 1004Kc)
[    0.178662] Synchronize counters for CPU 1: done.
[    0.211117] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.211126] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.211135] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.211184] CPU2 revision is: 0001992f (MIPS 1004Kc)
[    0.270077] Synchronize counters for CPU 2: done.
[    0.300663] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.300672] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
[    0.300680] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
[    0.300732] CPU3 revision is: 0001992f (MIPS 1004Kc)
[    0.355261] Synchronize counters for CPU 3: done.
[    0.385131] smp: Brought up 1 node, 4 CPUs
[    0.393368] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.403193] futex hash table entries: 1024 (order: 3, 32768 bytes, linear)
[    0.410209] pinctrl core: initialized pinctrl subsystem
[    0.417826] NET: Registered protocol family 16
[    0.423368] thermal_sys: Registered thermal governor 'step_wise'
[    0.424309] cpuidle: using governor teo
[    0.446317] FPU Affinity set after 11720 emulations
[    0.473860] clocksource: Switched to clocksource GIC
[    0.480586] NET: Registered protocol family 2
[    0.485387] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear)
[    0.493691] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.502064] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.509678] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
[    0.516671] TCP: Hash tables configured (established 1024 bind 1024)
[    0.523087] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.529572] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.536761] NET: Registered protocol family 1
[    0.541055] PCI: CLS 0 bytes, default 32
[    0.547376] workingset: timestamp_bits=14 max_order=15 bucket_order=1
[    0.557973] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.563992] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    0.574980] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.584067] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.589889] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.595808] mt7621_gpio 1e000600.gpio: registering 32 gpios
[    0.602247] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[    0.612676] printk: console [ttyS0] disabled
[    0.617014] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
[    0.626024] printk: console [ttyS0] enabled
[    0.634279] printk: bootconsole [early0] disabled
[    0.646728] spi-mt7621 1e000b00.spi: sys_freq: 220000000
[    0.653753] spi-nor spi0.0: w25q128 (16384 Kbytes)
[    0.658609] 7 fixed-partitions partitions found on MTD device spi0.0
[    0.665038] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
[    0.672337] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
[    0.680403] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
[    0.687764] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions
[    0.696156] Creating 7 MTD partitions on "spi0.0":
[    0.700959] 0x000000000000-0x000000030000 : "u-boot"
[    0.706891] 0x000000030000-0x000000040000 : "u-boot-env"
[    0.713250] 0x000000040000-0x000000050000 : "factory"
[    0.719330] 0x000000050000-0x000000fd0000 : "firmware"
[    0.725636] 2 uimage-fw partitions found on MTD device firmware
[    0.731555] Creating 2 MTD partitions on "firmware":
[    0.736561] 0x000000000000-0x000000293110 : "kernel"
[    0.741503] mtd: partition "kernel" doesn't end on an erase/write block -- force read-only
[    0.750714] 0x000000293110-0x000000f80000 : "rootfs"
[    0.755722] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only
[    0.765707] mtd: device 5 (rootfs) set to be root filesystem
[    0.771487] 1 squashfs-split partitions found on MTD device rootfs
[    0.777695] 0x000000650000-0x000000f80000 : "rootfs_data"
[    0.784133] 0x000000fd0000-0x000000fe0000 : "debug"
[    0.789945] 0x000000fe0000-0x000000ff0000 : "backup"
[    0.795899] 0x000000ff0000-0x000001000000 : "bdinfo"
[    0.845497] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
[    0.855277] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
[    0.864666] i2c /dev entries driver
[    0.870423] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
[    0.877188] mt7621-pci 1e140000.pcie:   No bus range found for /pcie@1e140000, using [bus 00-ff]
[    0.886003] mt7621-pci 1e140000.pcie:      MEM 0x0060000000..0x006fffffff -> 0x0000000000
[    0.894188] mt7621-pci 1e140000.pcie:       IO 0x001e160000..0x001e16ffff -> 0x0000000000
[    0.902423] mt7621-pci 1e140000.pcie: Parsing DT failed
[    0.910121] NET: Registered protocol family 10
[    0.916353] Segment Routing with IPv6
[    0.920105] NET: Registered protocol family 17
[    0.924731] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    0.938072] 8021q: 802.1Q VLAN Support v1.8
[    0.945674] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
[    0.977308] mt7530 mdio-bus:1f lan4 (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7530 PHY] (irq=26)
[    0.989797] mt7530 mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7530 PHY] (irq=27)
[    1.002114] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7530 PHY] (irq=28)
[    1.014556] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7530 PHY] (irq=29)
[    1.027072] mt7530 mdio-bus:1f wan (uninitialized): PHY [mt7530-0:04] driver [MediaTek MT7530 PHY] (irq=30)
[    1.039714] mt7530 mdio-bus:1f: configuring for fixed/rgmii link mode
[    1.050191] DSA: tree 0 setup
[    1.053798] rt2880-pinmux pinctrl: pcie is already enabled
[    1.059388] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges:
[    1.066103] mt7621-pci 1e140000.pcie:   No bus range found for /pcie@1e140000, using [bus 00-ff]
[    1.074898] mt7621-pci 1e140000.pcie:      MEM 0x0060000000..0x006fffffff -> 0x0000000000
[    1.083048] mt7621-pci 1e140000.pcie:       IO 0x001e160000..0x001e16ffff -> 0x0000000000
[    1.091314] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1)
[    1.099143] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0)
[    1.106845] mt7621-pci 1e140000.pcie: failed to parse bus ranges property: -22
[    1.214323] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz
[    1.219888] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz
[    1.325645] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK)
[    1.332581] mt7621-pci 1e140000.pcie: PCIE0 enabled
[    1.337460] mt7621-pci 1e140000.pcie: PCIE1 enabled
[    1.342321] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
[    1.351784] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
[    1.358160] pci_bus 0000:00: root bus resource [io  0x1e160000-0x1e16ffff]
[    1.365033] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
[    1.371881] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.377362] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] (bus address [0x00000000-0x0fffffff])
[    1.387566] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
[    1.393595] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    1.399838] pci 0000:00:00.0: reg 0x14: [mem 0x60500000-0x6050ffff]
[    1.406165] pci 0000:00:00.0: supports D1
[    1.410159] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
[    1.416617] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
[    1.422650] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
[    1.428926] pci 0000:00:01.0: reg 0x14: [mem 0x60510000-0x6051ffff]
[    1.435249] pci 0000:00:01.0: supports D1
[    1.439242] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
[    1.446948] pci 0000:01:00.0: [14c3:7663] type 00 class 0x000280
[    1.452991] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
[    1.460052] pci 0000:01:00.0: reg 0x10: [mem size 0x00100000 64bit pref]
[    1.466768] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid
[    1.473803] pci 0000:01:00.0: reg 0x18: [mem size 0x00004000 64bit pref]
[    1.480488] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid
[    1.487554] pci 0000:01:00.0: reg 0x20: [mem size 0x00001000 64bit pref]
[    1.494369] pci 0000:01:00.0: supports D1 D2
[    1.498621] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.505266] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s PCIe x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5.0 GT/s PCIe x1 link)
[    1.521660] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[    1.526915] pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
[    1.532984] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    1.539759] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x602fffff pref]
[    1.546977] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[    1.553865] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000
[    1.559896] pci 0000:02:00.0: reg 0x10: initial BAR value 0x00000000 invalid
[    1.566946] pci 0000:02:00.0: reg 0x10: [mem size 0x00100000]
[    1.572810] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.580614] pci 0000:00:01.0: PCI bridge to [bus 02-ff]
[    1.585872] pci 0000:00:01.0:   bridge window [io  0x0000-0x0fff]
[    1.591942] pci 0000:00:01.0:   bridge window [mem 0x60300000-0x603fffff]
[    1.598718] pci 0000:00:01.0:   bridge window [mem 0x60400000-0x604fffff pref]
[    1.605936] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
[    1.612574] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
[    1.619174] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
[    1.626130] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
[    1.632714] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
[    1.639674] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
[    1.646458] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x602fffff pref]
[    1.653670] pci 0000:00:01.0: BAR 8: assigned [mem 0x60300000-0x603fffff]
[    1.660430] pci 0000:00:01.0: BAR 9: assigned [mem 0x60400000-0x604fffff pref]
[    1.667643] pci 0000:00:00.0: BAR 1: assigned [mem 0x60500000-0x6050ffff]
[    1.674429] pci 0000:00:01.0: BAR 1: assigned [mem 0x60510000-0x6051ffff]
[    1.681190] pci 0000:00:00.0: BAR 7: assigned [io  0x1e160000-0x1e160fff]
[    1.687971] pci 0000:00:01.0: BAR 7: assigned [io  0x1e161000-0x1e161fff]
[    1.694767] pci 0000:01:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit pref]
[    1.702490] pci 0000:01:00.0: BAR 2: assigned [mem 0x60200000-0x60203fff 64bit pref]
[    1.710234] pci 0000:01:00.0: BAR 4: assigned [mem 0x60204000-0x60204fff 64bit pref]
[    1.717974] pci 0000:00:00.0: PCI bridge to [bus 01]
[    1.722918] pci 0000:00:00.0:   bridge window [io  0x1e160000-0x1e160fff]
[    1.729696] pci 0000:00:00.0:   bridge window [mem 0x60000000-0x600fffff]
[    1.736474] pci 0000:00:00.0:   bridge window [mem 0x60100000-0x602fffff pref]
[    1.743696] pci 0000:02:00.0: BAR 0: assigned [mem 0x60300000-0x603fffff]
[    1.750458] pci 0000:00:01.0: PCI bridge to [bus 02]
[    1.755424] pci 0000:00:01.0:   bridge window [io  0x1e161000-0x1e161fff]
[    1.762184] pci 0000:00:01.0:   bridge window [mem 0x60300000-0x603fffff]
[    1.768961] pci 0000:00:01.0:   bridge window [mem 0x60400000-0x604fffff pref]
[    1.782647] mt7530 mdio-bus:1f: Link is Up - 1Gbps/Full - flow control rx/tx
[    1.790698] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
[    1.801882] Freeing unused kernel memory: 1260K
[    1.806553] This architecture does not have kernel memory protection.
[    1.812992] Run /sbin/init as init process
[    1.817137]   with arguments:
[    1.817145]     /sbin/init
[    1.817149]   with environment:
[    1.817155]     HOME=/
[    1.817160]     TERM=linux
[    2.311119] init: Console is alive
[    2.314985] init: - watchdog -
[    3.057873] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[    3.240967] usbcore: registered new interface driver usbfs
[    3.246639] usbcore: registered new interface driver hub
[    3.252078] usbcore: registered new device driver usb
[    3.262717] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.270671] ehci-fsl: Freescale EHCI Host controller driver
[    3.277788] ehci-platform: EHCI generic platform driver
[    3.292136] xhci-mtk 1e1c0000.xhci: supply vbus not found, using dummy regulator
[    3.299823] xhci-mtk 1e1c0000.xhci: supply vusb33 not found, using dummy regulator
[    3.307640] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[    3.312969] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
[    3.333808] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000290010
[    3.342985] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
[    3.350062] hub 1-0:1.0: USB hub found
[    3.353974] hub 1-0:1.0: 2 ports detected
[    3.358660] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
[    3.364098] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
[    3.371579] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
[    3.378164] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.387203] hub 2-0:1.0: USB hub found
[    3.391101] hub 2-0:1.0: 1 port detected
[    3.402696] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[    3.423986] init: - preinit -
[    4.228890] random: jshn: uninitialized urandom read (4 bytes read)
[    4.374433] random: jshn: uninitialized urandom read (4 bytes read)
[    4.413898] random: jshn: uninitialized urandom read (4 bytes read)
[    4.666082] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
[    4.674400] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[    4.683316] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
[    4.690269] 8021q: adding VLAN 0 to HW filter on device lan1
[    4.699008] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    7.600571] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control off
[    7.607985] IPv6: ADDRCONF(NETDEV_CHANGE): lan1: link becomes ready
[    8.967706] jffs2: notice: (615) jffs2_build_xattr_subsystem: complete building xattr subsystem, 17 of xdatum (12 unchecked, 5 orphan) and 21 of xref (5 dead, 0 orphan) found.
[    8.985838] mount_root: switching to jffs2 overlay
[    8.996483] overlayfs: upper fs does not support tmpfile.
[    9.012107] urandom-seed: Seeding with /etc/urandom.seed
[    9.178924] mt7530 mdio-bus:1f lan1: Link is Down
[    9.194449] procd: - early -
[    9.197571] procd: - watchdog -
[    9.843841] procd: - watchdog -
[    9.943297] procd: - ubus -
[   10.069148] random: ubusd: uninitialized urandom read (4 bytes read)
[   10.114470] random: ubusd: uninitialized urandom read (4 bytes read)
[   10.121263] random: ubusd: uninitialized urandom read (4 bytes read)
[   10.133421] procd: - init -
[   10.229896] random: crng init done
[   10.233311] random: 23 urandom warning(s) missed due to ratelimiting
[   10.891904] kmodloader: loading kernel modules from /etc/modules.d/*
[   11.158834] urngd: v1.0.2 started.
[   11.199994] Loading modules backported from Linux version v5.15.58-0-g7d8048d4e064
[   11.207597] Backport generated by backports.git v5.15.58-1-0-g42a95ce7
[   11.475157] mt7621-pci 1e140000.pcie: bus=2 slot=1 irq=23
[   11.480618] pci 0000:00:01.0: enabling device (0006 -> 0007)
[   11.486366] mt7603e 0000:02:00.0: enabling device (0000 -> 0002)
[   11.492525] mt7603e 0000:02:00.0: ASIC revision: 76030010
[   12.524915] mt7603e 0000:02:00.0: Firmware Version: ap_pcie
[   12.530492] mt7603e 0000:02:00.0: Build Time: 20160107100755
[   12.573595] mt7603e 0000:02:00.0: firmware init done
[   12.742652] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   12.742712] ------------[ cut here ]------------
[   12.747414] WARNING: CPU: 1 PID: 784 at backports-5.15.58-1/net/wireless/core.c:882 0x826012dc [cfg80211@d06a9525+0x45f60]
[   12.758423] Modules linked in: mt7603e(+) mt76 mac80211 cfg80211 slhc nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_ipv6 nf_log_ipv4 nf_log_common nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c crc_ccitt compat ledtrig_usbport sha256_generic libsha256 seqiv jitterentropy_rng drbg hmac cmac leds_gpio xhci_plat_hcd xhci_pci xhci_mtk xhci_hcd fsl_mph_dr_of ehci_platform ehci_fsl ehci_hcd gpio_button_hotplug usbcore nls_base usb_common crc32c_generic
[   12.797467] CPU: 1 PID: 784 Comm: kmodloader Not tainted 5.10.146 #0
[   12.803796] Stack : 00000000 8072037c 809a0000 00000001 00000000 00000000 00000000 00000000
[   12.812142]         00000000 00000000 00000000 00000000 00000000 00000001 824859e0 3d0d26c1
[   12.820487]         82485a78 00000000 00000000 82485888 00000038 80399bc4 ffffffea 00000000
[   12.828836]         82485894 00000124 807c2868 ffffffff 824859c0 806ef114 80000000 806f0000
[   12.837186]         00000009 8277aa74 8277aa78 00000001 00000018 80403500 00000004 80980004
[   12.845535]         ...
[   12.847976] Call Trace:
[   12.848007] [<80399bc4>] 0x80399bc4
[   12.853911] [<80403500>] 0x80403500
[   12.857385] [<80007b08>] 0x80007b08
[   12.860854] [<80007b10>] 0x80007b10
[   12.864329] [<8037ecd4>] 0x8037ecd4
[   12.867809] [<826012dc>] 0x826012dc [cfg80211@d06a9525+0x45f60]
[   12.873702] [<8007fb60>] 0x8007fb60
[   12.877178] [<826012dc>] 0x826012dc [cfg80211@d06a9525+0x45f60]
[   12.883066] [<8003007c>] 0x8003007c
[   12.886547] [<826012dc>] 0x826012dc [cfg80211@d06a9525+0x45f60]
[   12.892439] [<80030144>] 0x80030144
[   12.895916] [<8018fdf4>] 0x8018fdf4
[   12.899393] [<826012dc>] 0x826012dc [cfg80211@d06a9525+0x45f60]
[   12.905289] [<80508ef0>] 0x80508ef0
[   12.908766] [<8276fd58>] 0x8276fd58 [mac80211@697a5426+0x81400]
[   12.914671] [<82739e30>] 0x82739e30 [mac80211@697a5426+0x81400]
[   12.920569] [<82701508>] 0x82701508 [mac80211@697a5426+0x81400]
[   12.926468] [<80395380>] 0x80395380
[   12.929940] [<804bf0b8>] 0x804bf0b8
[   12.933421] [<8259426c>] 0x8259426c [mt76@c0529c74+0xafe0]
[   12.938898] [<82652920>] 0x82652920 [mt7603e@864b96f4+0x96e0]
[   12.944627] [<8008c7c4>] 0x8008c7c4
[   12.948110] [<82650168>] 0x82650168 [mt7603e@864b96f4+0x96e0]
[   12.953830] [<803c9a10>] 0x803c9a10
[   12.957306] [<803c09a8>] 0x803c09a8
[   12.960774] [<80415248>] 0x80415248
[   12.964254] [<80415c1c>] 0x80415c1c
[   12.967727] [<8024beb4>] 0x8024beb4
[   12.971201] [<80416754>] 0x80416754
[   12.974678] [<803c0854>] 0x803c0854
[   12.978150] [<80416764>] 0x80416764
[   12.981618] [<804167dc>] 0x804167dc
[   12.985097] [<80416764>] 0x80416764
[   12.988568] [<80413610>] 0x80413610
[   12.992041] [<80414e24>] 0x80414e24
[   12.995521] [<80416fe4>] 0x80416fe4
[   12.998992] [<800c2094>] 0x800c2094
[   13.002467] [<8265f048>] 0x8265f048 [mt7603e@864b96f4+0x96e0]
[   13.008195] [<8265f000>] 0x8265f000 [mt7603e@864b96f4+0x96e0]
[   13.013918] [<8000157c>] 0x8000157c
[   13.017390] [<800c3334>] 0x800c3334
[   13.020859] [<8018fdf4>] 0x8018fdf4
[   13.024343] [<800c3354>] 0x800c3354
[   13.027816] [<800c5398>] 0x800c5398
[   13.031292] [<80014578>] 0x80014578
[   13.034772] 
[   13.036371] ---[ end trace 9b5b1161f6f443cf ]---
[   13.042361] mt7603e: probe of 0000:02:00.0 failed with error -22
[   13.101351] PPP generic driver version 2.4.2
[   13.107467] NET: Registered protocol family 24
[   13.119522] kmodloader: done loading kernel modules from /etc/modules.d/*
[   21.325899] mtk_soc_eth 1e100000.ethernet eth0: Link is Down
[   21.344058] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
[   21.352296] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[   21.356738] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
[   21.367839] 8021q: adding VLAN 0 to HW filter on device lan1
[   21.376425] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   21.384688] br-lan: port 1(lan1) entered blocking state
[   21.389934] br-lan: port 1(lan1) entered disabled state
[   21.396730] device lan1 entered promiscuous mode
[   21.401401] device eth0 entered promiscuous mode
[   21.432619] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode
[   21.439962] 8021q: adding VLAN 0 to HW filter on device lan2
[   21.450596] br-lan: port 2(lan2) entered blocking state
[   21.456045] br-lan: port 2(lan2) entered disabled state
[   21.462993] device lan2 entered promiscuous mode
[   21.481572] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode
[   21.489059] 8021q: adding VLAN 0 to HW filter on device lan3
[   21.499731] br-lan: port 3(lan3) entered blocking state
[   21.505103] br-lan: port 3(lan3) entered disabled state
[   21.512248] device lan3 entered promiscuous mode
[   21.531717] mt7530 mdio-bus:1f lan4: configuring for phy/gmii link mode
[   21.539068] 8021q: adding VLAN 0 to HW filter on device lan4
[   21.549115] br-lan: port 4(lan4) entered blocking state
[   21.554512] br-lan: port 4(lan4) entered disabled state
[   21.561343] device lan4 entered promiscuous mode
[   21.583732] mt7530 mdio-bus:1f wan: configuring for phy/gmii link mode
[   21.590869] 8021q: adding VLAN 0 to HW filter on device wan
[   23.807892] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control off
[   23.815292] br-lan: port 1(lan1) entered blocking state
[   23.820499] br-lan: port 1(lan1) entered forwarding state
[   23.828195] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[   24.745900] mt7530 mdio-bus:1f wan: Link is Up - 1Gbps/Full - flow control off
[   24.753148] IPv6: ADDRCONF(NETDEV_CHANGE): wan: link becomes ready

How did you install that?

For my Cudy, I had to install the OpenWRT-Version from the manufacturer first, before using any official builds.

HTH

Hey!

By using the manufacturers image I got it working.

Thanks!

1 Like