I've successfully installed the latest SNAPSHOT (r24951-1a5e51ab00). All seems to be running well, except for wireless upload speeds. I have Verizon Fios at 300/300. For some reason, the wireless uploads only go up to about 85 Mbps. I've tested with another access point and was able to get full upload speed so I'm thinking I might be missing some settings. This is the first time installing Openwrt on this router, are there any wifi settings I need to implement to get my full upload speeds? Any advice would be appreciated. Thank you!
configure your country in the wifi settings.
Yes I already have it set to the US
Post your question in the Installing and Using OpenWRT forum and add the following data:
Connect to your OpenWRT device using ssh and copy the output of the following commands and post it here using the "Preformatted text </> " button:
Remember to redact passwords, MAC addresses and any public IP addresses you may have:
ubus call system board
cat /etc/config/network
cat /etc/config/wireless
cat /etc/config/dhcp
cat /etc/config/firewall
already requested the post + replies to split out from this thread.
2 Likes
Thank you for splitting out the thread. I have since set it up as an access point only. Uploads seems better. Sometimes I get my full bandwidth on uploads other times not so much. I will continue testing.