Which version support miniPCIe?

chirayu-patel · February 5, 2018, 5:32am

I recently bought Compex MMZ531 :https://www.compex.com.sg/product/mmz531/

It has got wle650v5-18A 11ac chip. I tried the latest version LEDE on it by selecting the ath10k kernel module.

Its still not able to recognize the 11ac firmware unfortunately.. I was told by their team that its because of lack of miniPCIe support.

Could anyone let me know is there something that I am missing out ?

pepe2k · February 5, 2018, 7:05am

Latest LEDE version for what board?

chirayu-patel · February 6, 2018, 9:04am

It is compex wpj531

pepe2k · February 6, 2018, 9:24am

This board has PCIe enabled:

github.com

openwrt/openwrt/blob/master/target/linux/ar71xx/files/arch/mips/ath79/mach-wpj531.c#L125


	ath79_switch_data.phy4_mii_en = 1;
	ath79_eth1_data.duplex = DUPLEX_FULL;
	ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
	ath79_eth1_data.speed = SPEED_1000;
	ath79_switch_data.phy_poll_mask |= BIT(4);
	ath79_init_mac(ath79_eth1_data.mac_addr, mac + WPJ531_MAC1_OFFSET, 0);
	ath79_register_eth(1);


	ath79_register_wmac(art + WPJ531_WMAC_CALDATA_OFFSET, NULL);


	ath79_register_pci();
	ath79_register_usb();
}


static void __init wpj531_setup(void)
{
	common_setup();


	ath79_register_leds_gpio(-1,
				ARRAY_SIZE(wpj531_leds_gpio),
				wpj531_leds_gpio);

I suppose you have the same problem as @user3097019