Why are you acting all self righteous? Who cares when someone that is asking for help is wrong. They would not be asking if they had the same level of knowledge. It's not helpful to anyone finding this thread your acting this way. I told you I got mixed up with the things I've posted and am experiencing.
Your answer doesn't help in any way what so ever. My question is why are the packages showing as being installed yet aren't on the device when I check using opkg list-installed.
because I asked three times to get a full list of commands you are running to generate this firmware image with image builder and you still don't do that
No need to get all puffy over that. If you read, I also said there was no point because I mixed up the question. There is no reason to get this way. Either help someone or don't help them, no one is making you do anything.
Besides, now you are simply wrecking my question. I am still trying to solve the problem.
it's annoying when people you are trying to help can't cooperate and think they know better
Can you please stop the personal attacks and the knowledge bullying. I sure don't need it nor anyone else who will find this thread.
I have never, not even once said that I know more than anyone or that I would be non cooperative. I would not have asked the question in these forums if I could have found my own answer.
In terms of the feeds error, I too have been using image builder for many years and have seen the feeds error countless times. In fact, I'm surprised you even asked me about it considering that the forums are filled with the question asking about this problem.
Look below, I'll show you. Yes, it's an old version because I don't always need the latest so was using 18.06.2. It doesn't seem to happen in version 19.07.7 but with that version, I have the missing packages which is why I originally posted this question.
# make image PROFILE="gl-mt300n-v2" PACKAGES="bash bc curl"
Building images for ramips - GL-iNet GL-MT300N-V2
Packages: bash bc curl base-files busybox dnsmasq dropbear firewall fstools ip6tables iptables kernel kmod-gpio-button-hotplug kmod-ipt-offload kmod-leds-gpio kmod-mt76 kmod-usb-ohci kmod-usb2 libc libgcc logd mtd netifd odhcp6c odhcpd-ipv6only opkg ppp ppp-mod-pppoe swconfig uci uclient-fetch wpad-mini
Downloading http://downloads.openwrt.org/releases/18.06.2/targets/ramips/mt76x8/packages/Packages.gz
Updated list of available packages in /clients/18.06.2-ramips-mt300n-v2/build_dir/target-mipsel_24kc_musl/root-ramips/../../../../../clients/18.06.2-ramips-mt300n-v2/dl/openwrt_core
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/Packages.gz
Updated list of available packages in /clients/18.06.2-ramips-mt300n-v2/build_dir/target-mipsel_24kc_musl/root-ramips/../../../../../clients/18.06.2-ramips-mt300n-v2/dl/openwrt_base
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/luci/Packages.gz
Updated list of available packages in /clients/18.06.2-ramips-mt300n-v2/build_dir/target-mipsel_24kc_musl/root-ramips/../../../../../clients/18.06.2-ramips-mt300n-v2/dl/openwrt_luci
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/packages/Packages.gz
Updated list of available packages in /clients/18.06.2-ramips-mt300n-v2/build_dir/target-mipsel_24kc_musl/root-ramips/../../../../../clients/18.06.2-ramips-mt300n-v2/dl/openwrt_packages
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/routing/Packages.gz
Updated list of available packages in /clients/18.06.2-ramips-mt300n-v2/build_dir/target-mipsel_24kc_musl/root-ramips/../../../../../clients/18.06.2-ramips-mt300n-v2/dl/openwrt_routing
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/telephony/Packages.gz
Updated list of available packages in /clients/18.06.2-ramips-mt300n-v2/build_dir/target-mipsel_24kc_musl/root-ramips/../../../../../clients/18.06.2-ramips-mt300n-v2/dl/openwrt_telephony
Downloading file:packages/Packages
Updated list of available packages in /clients/18.06.2-ramips-mt300n-v2/build_dir/target-mipsel_24kc_musl/root-ramips/../../../../../clients/18.06.2-ramips-mt300n-v2/dl/imagebuilder
Installing packages...
Installing libc (1.1.19-1) to root...
Installing libgcc (7.3.0-1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/libgcc_7.3.0-1_mipsel_24kc.ipk.
Configuring libgcc.
Configuring libc.
Installing kernel (4.14.95-1-fa0ac614032ecce6935c8737b30999bb) to root...
Configuring kernel.
Installing bash (4.4.18-2) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/bash_4.4.18-2_mipsel_24kc.ipk.
Installing terminfo (6.1-1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/terminfo_6.1-1_mipsel_24kc.ipk.
Installing libncurses (6.1-1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/libncurses_6.1-1_mipsel_24kc.ipk.
Installing libreadline (7.0-1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/libreadline_7.0-1_mipsel_24kc.ipk.
Installing bc (1.06.95-1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/bc_1.06.95-1_mipsel_24kc.ipk.
Installing curl (7.60.0-4) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/curl_7.60.0-4_mipsel_24kc.ipk.
Installing libmbedtls (2.16.8-1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/libmbedtls_2.16.8-1_mipsel_24kc.ipk.
Installing ca-bundle (20200601-1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/ca-bundle_20200601-1_all.ipk.
Installing libcurl (7.60.0-4) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/libcurl_7.60.0-4_mipsel_24kc.ipk.
Installing base-files (194.2-r7676-cddd7b4c77) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/base-files_194.2-r7676-cddd7b4c77_mipsel_24kc.ipk.
Installing libubox (2018-07-25-c83a84af-5) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/libubox_2018-07-25-c83a84af-5_mipsel_24kc.ipk.
Installing libuci (2019-05-17-f199b961-2) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/libuci_2019-05-17-f199b961-2_mipsel_24kc.ipk.
Installing libnl-tiny (0.1-5) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/libnl-tiny_0.1-5_mipsel_24kc.ipk.
Installing libubus (2018-10-06-221ce7e7-1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/libubus_2018-10-06-221ce7e7-1_mipsel_24kc.ipk.
Installing libjson-c (0.12.1-2.1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/libjson-c_0.12.1-2.1_mipsel_24kc.ipk.
Installing libblobmsg-json (2018-07-25-c83a84af-5) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/libblobmsg-json_2018-07-25-c83a84af-5_mipsel_24kc.ipk.
Installing ubusd (2018-10-06-221ce7e7-1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/ubusd_2018-10-06-221ce7e7-1_mipsel_24kc.ipk.
Installing ubus (2018-10-06-221ce7e7-1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/ubus_2018-10-06-221ce7e7-1_mipsel_24kc.ipk.
Installing jshn (2018-07-25-c83a84af-5) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/jshn_2018-07-25-c83a84af-5_mipsel_24kc.ipk.
Installing netifd (2019-01-31-a2aba5c7-2.1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/netifd_2019-01-31-a2aba5c7-2.1_mipsel_24kc.ipk.
Installing libjson-script (2018-07-25-c83a84af-5) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/libjson-script_2018-07-25-c83a84af-5_mipsel_24kc.ipk.
Installing ubox (2018-02-14-128bc35f-2) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/ubox_2018-02-14-128bc35f-2_mipsel_24kc.ipk.
Installing procd (2018-03-28-dfb68f85-1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/procd_2018-03-28-dfb68f85-1_mipsel_24kc.ipk.
Installing jsonfilter (2018-02-04-c7e938d6-1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/jsonfilter_2018-02-04-c7e938d6-1_mipsel_24kc.ipk.
Installing usign (2020-05-23-f1f65026-1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/usign_2020-05-23-f1f65026-1_mipsel_24kc.ipk.
Installing openwrt-keyring (2018-05-18-103a32e9-1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/openwrt-keyring_2018-05-18-103a32e9-1_mipsel_24kc.ipk.
Installing fstools (2018-12-28-af93f4b8-3) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/fstools_2018-12-28-af93f4b8-3_mipsel_24kc.ipk.
Installing fwtool (1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/fwtool_1_mipsel_24kc.ipk.
Installing busybox (1.28.4-3) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/busybox_1.28.4-3_mipsel_24kc.ipk.
Installing dnsmasq (2.80-1.4) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/dnsmasq_2.80-1.4_mipsel_24kc.ipk.
Installing dropbear (2017.75-7.1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/dropbear_2017.75-7.1_mipsel_24kc.ipk.
Installing firewall (2018-08-13-1c4d5bcd-3) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/firewall_2018-08-13-1c4d5bcd-3_mipsel_24kc.ipk.
Installing libxtables (1.6.2-1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/libxtables_1.6.2-1_mipsel_24kc.ipk.
Installing libip4tc (1.6.2-1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/libip4tc_1.6.2-1_mipsel_24kc.ipk.
Installing libip6tc (1.6.2-1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/libip6tc_1.6.2-1_mipsel_24kc.ipk.
Installing kmod-nf-reject (4.14.95-1) to root...
Downloading file:packages/kmod-nf-reject_4.14.95-1_mipsel_24kc.ipk
Installing kmod-nf-ipt (4.14.95-1) to root...
Downloading file:packages/kmod-nf-ipt_4.14.95-1_mipsel_24kc.ipk
Installing kmod-ipt-core (4.14.95-1) to root...
Downloading file:packages/kmod-ipt-core_4.14.95-1_mipsel_24kc.ipk
Installing kmod-nf-conntrack (4.14.95-1) to root...
Downloading file:packages/kmod-nf-conntrack_4.14.95-1_mipsel_24kc.ipk
Installing kmod-ipt-conntrack (4.14.95-1) to root...
Downloading file:packages/kmod-ipt-conntrack_4.14.95-1_mipsel_24kc.ipk
Installing kmod-nf-conntrack6 (4.14.95-1) to root...
Downloading file:packages/kmod-nf-conntrack6_4.14.95-1_mipsel_24kc.ipk
Installing kmod-nf-nat (4.14.95-1) to root...
Downloading file:packages/kmod-nf-nat_4.14.95-1_mipsel_24kc.ipk
Installing kmod-ipt-nat (4.14.95-1) to root...
Downloading file:packages/kmod-ipt-nat_4.14.95-1_mipsel_24kc.ipk
Package fstools (2018-12-28-af93f4b8-3) installed in root is up to date.
Installing ip6tables (1.6.2-1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/ip6tables_1.6.2-1_mipsel_24kc.ipk.
Installing kmod-nf-reject6 (4.14.95-1) to root...
Downloading file:packages/kmod-nf-reject6_4.14.95-1_mipsel_24kc.ipk
Installing kmod-nf-ipt6 (4.14.95-1) to root...
Downloading file:packages/kmod-nf-ipt6_4.14.95-1_mipsel_24kc.ipk
Installing kmod-ip6tables (4.14.95-1) to root...
Downloading file:packages/kmod-ip6tables_4.14.95-1_mipsel_24kc.ipk
Installing iptables (1.6.2-1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/iptables_1.6.2-1_mipsel_24kc.ipk.
Package iptables (1.6.2-1) installed in root is up to date.
Package kernel (4.14.95-1-fa0ac614032ecce6935c8737b30999bb) installed in root is up to date.
Installing kmod-gpio-button-hotplug (4.14.95-2) to root...
Downloading file:packages/kmod-gpio-button-hotplug_4.14.95-2_mipsel_24kc.ipk
Installing kmod-ipt-offload (4.14.95-1) to root...
Downloading file:packages/kmod-ipt-offload_4.14.95-1_mipsel_24kc.ipk
Installing kmod-nf-flow (4.14.95-1) to root...
Downloading file:packages/kmod-nf-flow_4.14.95-1_mipsel_24kc.ipk
Installing kmod-leds-gpio (4.14.95-1) to root...
Downloading file:packages/kmod-leds-gpio_4.14.95-1_mipsel_24kc.ipk
Installing kmod-mt76 (4.14.95+2019-01-25-0b939dc7-1) to root...
Downloading file:packages/kmod-mt76_4.14.95%2b2019-01-25-0b939dc7-1_mipsel_24kc.ipk
Installing iw-full (4.14-1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/iw-full_4.14-1_mipsel_24kc.ipk.
Installing wireless-regdb (2017-10-20-4343d359) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/wireless-regdb_2017-10-20-4343d359_mipsel_24kc.ipk.
Installing kmod-cfg80211 (4.14.95+2017-11-01-9) to root...
Downloading file:packages/kmod-cfg80211_4.14.95%2b2017-11-01-9_mipsel_24kc.ipk
Installing hostapd-common (2018-05-21-62566bc2-8) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/hostapd-common_2018-05-21-62566bc2-8_mipsel_24kc.ipk.
Installing kmod-mac80211 (4.14.95+2017-11-01-9) to root...
Downloading file:packages/kmod-mac80211_4.14.95%2b2017-11-01-9_mipsel_24kc.ipk
Installing kmod-mt76-core (4.14.95+2019-01-25-0b939dc7-1) to root...
Downloading file:packages/kmod-mt76-core_4.14.95%2b2019-01-25-0b939dc7-1_mipsel_24kc.ipk
Installing kmod-mt76x02-common (4.14.95+2019-01-25-0b939dc7-1) to root...
Downloading file:packages/kmod-mt76x02-common_4.14.95%2b2019-01-25-0b939dc7-1_mipsel_24kc.ipk
Installing kmod-mt76x2-common (4.14.95+2019-01-25-0b939dc7-1) to root...
Downloading file:packages/kmod-mt76x2-common_4.14.95%2b2019-01-25-0b939dc7-1_mipsel_24kc.ipk
Installing kmod-mt76x2 (4.14.95+2019-01-25-0b939dc7-1) to root...
Downloading file:packages/kmod-mt76x2_4.14.95%2b2019-01-25-0b939dc7-1_mipsel_24kc.ipk
Installing kmod-mt7603 (4.14.95+2019-01-25-0b939dc7-1) to root...
Downloading file:packages/kmod-mt7603_4.14.95%2b2019-01-25-0b939dc7-1_mipsel_24kc.ipk
Installing kmod-usb-ohci (4.14.95-1) to root...
Downloading file:packages/kmod-usb-ohci_4.14.95-1_mipsel_24kc.ipk
Installing kmod-nls-base (4.14.95-1) to root...
Downloading file:packages/kmod-nls-base_4.14.95-1_mipsel_24kc.ipk
Installing kmod-usb-core (4.14.95-1) to root...
Downloading file:packages/kmod-usb-core_4.14.95-1_mipsel_24kc.ipk
Installing kmod-usb2 (4.14.95-1) to root...
Downloading file:packages/kmod-usb2_4.14.95-1_mipsel_24kc.ipk
Installing kmod-usb-ehci (4.14.95-1) to root...
Downloading file:packages/kmod-usb-ehci_4.14.95-1_mipsel_24kc.ipk
Package libc (1.1.19-1) installed in root is up to date.
Package libgcc (7.3.0-1) installed in root is up to date.
Installing logd (2018-02-14-128bc35f-2) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/logd_2018-02-14-128bc35f-2_mipsel_24kc.ipk.
Installing mtd (23) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/mtd_23_mipsel_24kc.ipk.
Package netifd (2019-01-31-a2aba5c7-2.1) installed in root is up to date.
Installing odhcp6c (2018-07-14-67ae6a71-15) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/odhcp6c_2018-07-14-67ae6a71-15_mipsel_24kc.ipk.
Installing odhcpd-ipv6only (1.15-3) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/odhcpd-ipv6only_1.15-3_mipsel_24kc.ipk.
Installing opkg (2020-01-25-c09fe209-1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/opkg_2020-01-25-c09fe209-1_mipsel_24kc.ipk.
Installing libuclient (2018-11-24-3ba74ebc-1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/libuclient_2018-11-24-3ba74ebc-1_mipsel_24kc.ipk.
Installing uclient-fetch (2018-11-24-3ba74ebc-1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/uclient-fetch_2018-11-24-3ba74ebc-1_mipsel_24kc.ipk.
Installing libpthread (1.1.19-1) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/libpthread_1.1.19-1_mipsel_24kc.ipk.
Installing ppp (2.4.7-13) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/ppp_2.4.7-13_mipsel_24kc.ipk.
Installing kmod-lib-crc-ccitt (4.14.95-1) to root...
Downloading file:packages/kmod-lib-crc-ccitt_4.14.95-1_mipsel_24kc.ipk
Installing kmod-slhc (4.14.95-1) to root...
Downloading file:packages/kmod-slhc_4.14.95-1_mipsel_24kc.ipk
Installing kmod-ppp (4.14.95-1) to root...
Downloading file:packages/kmod-ppp_4.14.95-1_mipsel_24kc.ipk
Installing ppp-mod-pppoe (2.4.7-13) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/ppp-mod-pppoe_2.4.7-13_mipsel_24kc.ipk.
Installing kmod-pppox (4.14.95-1) to root...
Downloading file:packages/kmod-pppox_4.14.95-1_mipsel_24kc.ipk
Installing kmod-pppoe (4.14.95-1) to root...
Downloading file:packages/kmod-pppoe_4.14.95-1_mipsel_24kc.ipk
Installing swconfig (11) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/swconfig_11_mipsel_24kc.ipk.
Installing uci (2019-05-17-f199b961-2) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/uci_2019-05-17-f199b961-2_mipsel_24kc.ipk.
Package uclient-fetch (2018-11-24-3ba74ebc-1) installed in root is up to date.
Installing wpad-mini (2018-05-21-62566bc2-8) to root...
Copying /clients/18.06.2-ramips-mt300n-v2/dl/wpad-mini_2018-05-21-62566bc2-8_mipsel_24kc.ipk.
Configuring terminfo.
Configuring libubox.
Configuring libuclient.
Configuring uclient-fetch.
Configuring libpthread.
Configuring opkg.
Configuring kmod-nls-base.
Configuring kmod-usb-core.
Configuring libubus.
Configuring libjson-c.
Configuring libblobmsg-json.
Configuring ubusd.
Configuring ubus.
Configuring busybox.
Configuring kmod-nf-reject6.
Configuring libncurses.
Configuring libreadline.
Configuring bash.
Configuring libuci.
Configuring libnl-tiny.
Configuring swconfig.
Configuring libmbedtls.
Configuring ca-bundle.
Configuring libcurl.
Configuring kmod-nf-conntrack.
Configuring kmod-nf-flow.
Configuring kmod-lib-crc-ccitt.
Configuring kmod-slhc.
Configuring kmod-ppp.
Configuring kmod-pppox.
Configuring kmod-pppoe.
Configuring iw-full.
Configuring kmod-nf-reject.
Configuring kmod-nf-ipt.
Configuring kmod-ipt-core.
Configuring kmod-ipt-conntrack.
Configuring jshn.
Configuring netifd.
Configuring libjson-script.
Configuring ubox.
Configuring procd.
Configuring jsonfilter.
Configuring usign.
Configuring openwrt-keyring.
Configuring fstools.
Configuring fwtool.
Configuring base-files.
Configuring kmod-nf-nat.
Configuring kmod-usb-ohci.
Configuring dnsmasq.
Configuring wireless-regdb.
Configuring kmod-cfg80211.
Configuring hostapd-common.
Configuring kmod-mac80211.
Configuring kmod-mt76-core.
Configuring kmod-mt76x02-common.
Configuring kmod-mt76x2-common.
Configuring kmod-mt76x2.
Configuring kmod-mt7603.
Configuring kmod-mt76.
Configuring kmod-usb-ehci.
Configuring kmod-usb2.
Configuring libxtables.
Configuring libip4tc.
Configuring libip6tc.
Configuring kmod-nf-conntrack6.
Configuring kmod-ipt-nat.
Configuring firewall.
Configuring kmod-nf-ipt6.
Configuring kmod-ip6tables.
Configuring odhcp6c.
Configuring uci.
Configuring wpad-mini.
Configuring dropbear.
Configuring curl.
Configuring mtd.
Configuring odhcpd-ipv6only.
Configuring ppp.
Configuring kmod-leds-gpio.
Configuring kmod-gpio-button-hotplug.
Configuring logd.
Configuring iptables.
Configuring ip6tables.
Configuring bc.
Configuring kmod-ipt-offload.
Configuring ppp-mod-pppoe.
Finalizing root filesystem...
Building images...
Unable to open feeds configuration at /clients/18.06.2-ramips-mt300n-v2/scripts/feeds line 48.
Parallel mksquashfs: Using 1 processor
Creating 4.0 filesystem on /clients/18.06.2-ramips-mt300n-v2/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/root.squashfs, block size 262144.
Pseudo file "/dev" exists in source filesystem "/clients/18.06.2-ramips-mt300n-v2/build_dir/target-mipsel_24kc_musl/root-ramips/dev".
Ignoring, exclude it (-e/-ef) to override.
[============================================================================================================================================================================================================================\] 619/619 100%
Exportable Squashfs 4.0 filesystem, xz compressed, data block size 262144
compressed data, compressed metadata, compressed fragments, no xattrs
duplicates are removed
Filesystem size 2810.29 Kbytes (2.74 Mbytes)
38.90% of uncompressed filesystem size (7223.66 Kbytes)
Inode table size 6436 bytes (6.29 Kbytes)
21.28% of uncompressed inode table size (30238 bytes)
Directory table size 8878 bytes (8.67 Kbytes)
48.24% of uncompressed directory table size (18405 bytes)
Number of duplicate files found 92
Number of inodes 906
Number of files 617
Number of fragments 22
Number of symbolic links 209
Number of device nodes 1
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 79
Number of ids (unique uids + gids) 1
Number of uids 1
unknown (0)
Number of gids 1
unknown (0)
2808+1 records in
2808+1 records out
1438162 bytes (1.4 MB, 1.4 MiB) copied, 0.0144705 s, 99.4 MB/s
5620+1 records in
5620+1 records out
2877742 bytes (2.9 MB, 2.7 MiB) copied, 0.0218868 s, 131 MB/s
padding image to 0041e000
padding image to 00420000
padding image to 00440000
Calculating checksums...
you stated you use files and there is no FILES in that command...
did you or did you not use FILES on the image that has issues?
what is with the odd paths here;
are you hardlinking or something?
just showing this in your OP would have saved us all alot of time...
which thread is your favourite out of this one and your other one?
You were ignoring my request and stating that "it is not important" to solve your issue.
This is "not cooperating" and "thinking you know more than me".
notice how wulfy also said
"just showing this in your OP would have saved us all alot of time..."
and Stangri post in the other thread.
so it's not just me trolling you
finally. Although you did not say where you downloaded the image builder from. I assume you used official release builds.
Also as Wulfy also said, there is no FILES=... variable in that command so you are not integrating any external config in this image.
so I pulled down the image builder from https://downloads.openwrt.org/releases/18.06.2/targets/ramips/mt76x8/
and as you see below yes I see also the same error as you
yours:
Unable to open feeds configuration at /clients/18.06.2-ramips-mt300n-v2/scripts/feeds line 48.
mine (just different folders):
Unable to open feeds configuration at /home/alby/openwrt-imagebuilder-18.06.2-ramips-mt76x8.Linux-x86_64/scripts/feeds line 48.
full output:
make image PROFILE="gl-mt300n-v2" PACKAGES="bash bc curl"
Checking 'working-make'... ok.
Checking 'case-sensitive-fs'... ok.
Checking 'proper-umask'... ok.
Checking 'gcc'... ok.
Checking 'working-gcc'... ok.
Checking 'g++'... ok.
Checking 'working-g++'... ok.
Checking 'ncurses'... ok.
Checking 'perl-thread-queue'... ok.
Checking 'tar'... ok.
Checking 'find'... ok.
Checking 'bash'... ok.
Checking 'patch'... ok.
Checking 'diff'... ok.
Checking 'cp'... ok.
Checking 'seq'... ok.
Checking 'awk'... ok.
Checking 'grep'... ok.
Checking 'getopt'... ok.
Checking 'stat'... ok.
Checking 'unzip'... ok.
Checking 'bzip2'... ok.
Checking 'wget'... ok.
Checking 'perl'... ok.
Checking 'python'... ok.
Checking 'git'... ok.
Checking 'file'... ok.
Checking 'ldconfig-stub'... ok.
Building images for ramips - GL-iNet GL-MT300N-V2
Packages: bash bc curl base-files busybox dnsmasq dropbear firewall fstools ip6tables iptables kernel kmod-gpio-button-hotplug kmod-ipt-offload kmod-leds-gpio kmod-mt76 kmod-usb-ohci kmod-usb2 libc libgcc logd mtd netifd odhcp6c odhcpd-ipv6only opkg ppp ppp-mod-pppoe swconfig uci uclient-fetch wpad-mini
Package list missing or not up-to-date, generating it.
Building package index...
Downloading http://downloads.openwrt.org/releases/18.06.2/targets/ramips/mt76x8/packages/Packages.gz
Updated list of available packages in /home/alby/openwrt-imagebuilder-18.06.2-ramips-mt76x8.Linux-x86_64/build_dir/target-mipsel_24kc_musl/root-ramips/../../../../../../home/alby/openwrt-imagebuilder-18.06.2-ramips-mt76x8.Linux-x86_64/dl/openwrt_core
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/Packages.gz
Updated list of available packages in /home/alby/openwrt-imagebuilder-18.06.2-ramips-mt76x8.Linux-x86_64/build_dir/target-mipsel_24kc_musl/root-ramips/../../../../../../home/alby/openwrt-imagebuilder-18.06.2-ramips-mt76x8.Linux-x86_64/dl/openwrt_base
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/luci/Packages.gz
Updated list of available packages in /home/alby/openwrt-imagebuilder-18.06.2-ramips-mt76x8.Linux-x86_64/build_dir/target-mipsel_24kc_musl/root-ramips/../../../../../../home/alby/openwrt-imagebuilder-18.06.2-ramips-mt76x8.Linux-x86_64/dl/openwrt_luci
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/packages/Packages.gz
Updated list of available packages in /home/alby/openwrt-imagebuilder-18.06.2-ramips-mt76x8.Linux-x86_64/build_dir/target-mipsel_24kc_musl/root-ramips/../../../../../../home/alby/openwrt-imagebuilder-18.06.2-ramips-mt76x8.Linux-x86_64/dl/openwrt_packages
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/routing/Packages.gz
Updated list of available packages in /home/alby/openwrt-imagebuilder-18.06.2-ramips-mt76x8.Linux-x86_64/build_dir/target-mipsel_24kc_musl/root-ramips/../../../../../../home/alby/openwrt-imagebuilder-18.06.2-ramips-mt76x8.Linux-x86_64/dl/openwrt_routing
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/telephony/Packages.gz
Updated list of available packages in /home/alby/openwrt-imagebuilder-18.06.2-ramips-mt76x8.Linux-x86_64/build_dir/target-mipsel_24kc_musl/root-ramips/../../../../../../home/alby/openwrt-imagebuilder-18.06.2-ramips-mt76x8.Linux-x86_64/dl/openwrt_telephony
Downloading file:packages/Packages
Updated list of available packages in /home/alby/openwrt-imagebuilder-18.06.2-ramips-mt76x8.Linux-x86_64/build_dir/target-mipsel_24kc_musl/root-ramips/../../../../../../home/alby/openwrt-imagebuilder-18.06.2-ramips-mt76x8.Linux-x86_64/dl/imagebuilder
Installing packages...
Installing libc (1.1.19-1) to root...
Installing libgcc (7.3.0-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/targets/ramips/mt76x8/packages/libgcc_7.3.0-1_mipsel_24kc.ipk
Configuring libgcc.
Configuring libc.
Installing kernel (4.14.95-1-fa0ac614032ecce6935c8737b30999bb) to root...
Configuring kernel.
Installing bash (4.4.18-2) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/packages/bash_4.4.18-2_mipsel_24kc.ipk
Installing terminfo (6.1-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/terminfo_6.1-1_mipsel_24kc.ipk
Installing libncurses (6.1-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/libncurses_6.1-1_mipsel_24kc.ipk
Installing libreadline (7.0-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/libreadline_7.0-1_mipsel_24kc.ipk
Installing bc (1.06.95-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/packages/bc_1.06.95-1_mipsel_24kc.ipk
Installing curl (7.60.0-4) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/curl_7.60.0-4_mipsel_24kc.ipk
Installing libmbedtls (2.16.8-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/libmbedtls_2.16.8-1_mipsel_24kc.ipk
Installing ca-bundle (20200601-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/ca-bundle_20200601-1_all.ipk
Installing libcurl (7.60.0-4) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/libcurl_7.60.0-4_mipsel_24kc.ipk
Installing base-files (194.2-r7676-cddd7b4c77) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/targets/ramips/mt76x8/packages/base-files_194.2-r7676-cddd7b4c77_mipsel_24kc.ipk
Installing libubox (2018-07-25-c83a84af-5) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/libubox_2018-07-25-c83a84af-5_mipsel_24kc.ipk
Installing libuci (2019-05-17-f199b961-2) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/libuci_2019-05-17-f199b961-2_mipsel_24kc.ipk
Installing libnl-tiny (0.1-5) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/libnl-tiny_0.1-5_mipsel_24kc.ipk
Installing libubus (2018-10-06-221ce7e7-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/libubus_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
Installing libjson-c (0.12.1-2.1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/libjson-c_0.12.1-2.1_mipsel_24kc.ipk
Installing libblobmsg-json (2018-07-25-c83a84af-5) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/libblobmsg-json_2018-07-25-c83a84af-5_mipsel_24kc.ipk
Installing ubusd (2018-10-06-221ce7e7-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/ubusd_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
Installing ubus (2018-10-06-221ce7e7-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/ubus_2018-10-06-221ce7e7-1_mipsel_24kc.ipk
Installing jshn (2018-07-25-c83a84af-5) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/jshn_2018-07-25-c83a84af-5_mipsel_24kc.ipk
Installing netifd (2019-01-31-a2aba5c7-2.1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/netifd_2019-01-31-a2aba5c7-2.1_mipsel_24kc.ipk
Installing libjson-script (2018-07-25-c83a84af-5) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/libjson-script_2018-07-25-c83a84af-5_mipsel_24kc.ipk
Installing ubox (2018-02-14-128bc35f-2) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/ubox_2018-02-14-128bc35f-2_mipsel_24kc.ipk
Installing procd (2018-03-28-dfb68f85-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/procd_2018-03-28-dfb68f85-1_mipsel_24kc.ipk
Installing jsonfilter (2018-02-04-c7e938d6-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/jsonfilter_2018-02-04-c7e938d6-1_mipsel_24kc.ipk
Installing usign (2020-05-23-f1f65026-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/usign_2020-05-23-f1f65026-1_mipsel_24kc.ipk
Installing openwrt-keyring (2018-05-18-103a32e9-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/openwrt-keyring_2018-05-18-103a32e9-1_mipsel_24kc.ipk
Installing fstools (2018-12-28-af93f4b8-3) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/targets/ramips/mt76x8/packages/fstools_2018-12-28-af93f4b8-3_mipsel_24kc.ipk
Installing fwtool (1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/targets/ramips/mt76x8/packages/fwtool_1_mipsel_24kc.ipk
Installing busybox (1.28.4-3) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/busybox_1.28.4-3_mipsel_24kc.ipk
Installing dnsmasq (2.80-1.4) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/dnsmasq_2.80-1.4_mipsel_24kc.ipk
Installing dropbear (2017.75-7.1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/dropbear_2017.75-7.1_mipsel_24kc.ipk
Installing firewall (2018-08-13-1c4d5bcd-3) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/firewall_2018-08-13-1c4d5bcd-3_mipsel_24kc.ipk
Installing libxtables (1.6.2-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/targets/ramips/mt76x8/packages/libxtables_1.6.2-1_mipsel_24kc.ipk
Installing libip4tc (1.6.2-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/targets/ramips/mt76x8/packages/libip4tc_1.6.2-1_mipsel_24kc.ipk
Installing libip6tc (1.6.2-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/targets/ramips/mt76x8/packages/libip6tc_1.6.2-1_mipsel_24kc.ipk
Installing kmod-nf-reject (4.14.95-1) to root...
Downloading file:packages/kmod-nf-reject_4.14.95-1_mipsel_24kc.ipk
Installing kmod-nf-ipt (4.14.95-1) to root...
Downloading file:packages/kmod-nf-ipt_4.14.95-1_mipsel_24kc.ipk
Installing kmod-ipt-core (4.14.95-1) to root...
Downloading file:packages/kmod-ipt-core_4.14.95-1_mipsel_24kc.ipk
Installing kmod-nf-conntrack (4.14.95-1) to root...
Downloading file:packages/kmod-nf-conntrack_4.14.95-1_mipsel_24kc.ipk
Installing kmod-ipt-conntrack (4.14.95-1) to root...
Downloading file:packages/kmod-ipt-conntrack_4.14.95-1_mipsel_24kc.ipk
Installing kmod-nf-conntrack6 (4.14.95-1) to root...
Downloading file:packages/kmod-nf-conntrack6_4.14.95-1_mipsel_24kc.ipk
Installing kmod-nf-nat (4.14.95-1) to root...
Downloading file:packages/kmod-nf-nat_4.14.95-1_mipsel_24kc.ipk
Installing kmod-ipt-nat (4.14.95-1) to root...
Downloading file:packages/kmod-ipt-nat_4.14.95-1_mipsel_24kc.ipk
Package fstools (2018-12-28-af93f4b8-3) installed in root is up to date.
Installing ip6tables (1.6.2-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/targets/ramips/mt76x8/packages/ip6tables_1.6.2-1_mipsel_24kc.ipk
Installing kmod-nf-reject6 (4.14.95-1) to root...
Downloading file:packages/kmod-nf-reject6_4.14.95-1_mipsel_24kc.ipk
Installing kmod-nf-ipt6 (4.14.95-1) to root...
Downloading file:packages/kmod-nf-ipt6_4.14.95-1_mipsel_24kc.ipk
Installing kmod-ip6tables (4.14.95-1) to root...
Downloading file:packages/kmod-ip6tables_4.14.95-1_mipsel_24kc.ipk
Installing iptables (1.6.2-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/targets/ramips/mt76x8/packages/iptables_1.6.2-1_mipsel_24kc.ipk
Package iptables (1.6.2-1) installed in root is up to date.
Package kernel (4.14.95-1-fa0ac614032ecce6935c8737b30999bb) installed in root is up to date.
Installing kmod-gpio-button-hotplug (4.14.95-2) to root...
Downloading file:packages/kmod-gpio-button-hotplug_4.14.95-2_mipsel_24kc.ipk
Installing kmod-ipt-offload (4.14.95-1) to root...
Downloading file:packages/kmod-ipt-offload_4.14.95-1_mipsel_24kc.ipk
Installing kmod-nf-flow (4.14.95-1) to root...
Downloading file:packages/kmod-nf-flow_4.14.95-1_mipsel_24kc.ipk
Installing kmod-leds-gpio (4.14.95-1) to root...
Downloading file:packages/kmod-leds-gpio_4.14.95-1_mipsel_24kc.ipk
Installing kmod-mt76 (4.14.95+2019-01-25-0b939dc7-1) to root...
Downloading file:packages/kmod-mt76_4.14.95%2b2019-01-25-0b939dc7-1_mipsel_24kc.ipk
Installing iw-full (4.14-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/iw-full_4.14-1_mipsel_24kc.ipk
Installing wireless-regdb (2017-10-20-4343d359) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/wireless-regdb_2017-10-20-4343d359_mipsel_24kc.ipk
Installing kmod-cfg80211 (4.14.95+2017-11-01-9) to root...
Downloading file:packages/kmod-cfg80211_4.14.95%2b2017-11-01-9_mipsel_24kc.ipk
Installing hostapd-common (2018-05-21-62566bc2-8) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/hostapd-common_2018-05-21-62566bc2-8_mipsel_24kc.ipk
Installing kmod-mac80211 (4.14.95+2017-11-01-9) to root...
Downloading file:packages/kmod-mac80211_4.14.95%2b2017-11-01-9_mipsel_24kc.ipk
Installing kmod-mt76-core (4.14.95+2019-01-25-0b939dc7-1) to root...
Downloading file:packages/kmod-mt76-core_4.14.95%2b2019-01-25-0b939dc7-1_mipsel_24kc.ipk
Installing kmod-mt76x02-common (4.14.95+2019-01-25-0b939dc7-1) to root...
Downloading file:packages/kmod-mt76x02-common_4.14.95%2b2019-01-25-0b939dc7-1_mipsel_24kc.ipk
Installing kmod-mt76x2-common (4.14.95+2019-01-25-0b939dc7-1) to root...
Downloading file:packages/kmod-mt76x2-common_4.14.95%2b2019-01-25-0b939dc7-1_mipsel_24kc.ipk
Installing kmod-mt76x2 (4.14.95+2019-01-25-0b939dc7-1) to root...
Downloading file:packages/kmod-mt76x2_4.14.95%2b2019-01-25-0b939dc7-1_mipsel_24kc.ipk
Installing kmod-mt7603 (4.14.95+2019-01-25-0b939dc7-1) to root...
Downloading file:packages/kmod-mt7603_4.14.95%2b2019-01-25-0b939dc7-1_mipsel_24kc.ipk
Installing kmod-usb-ohci (4.14.95-1) to root...
Downloading file:packages/kmod-usb-ohci_4.14.95-1_mipsel_24kc.ipk
Installing kmod-nls-base (4.14.95-1) to root...
Downloading file:packages/kmod-nls-base_4.14.95-1_mipsel_24kc.ipk
Installing kmod-usb-core (4.14.95-1) to root...
Downloading file:packages/kmod-usb-core_4.14.95-1_mipsel_24kc.ipk
Installing kmod-usb2 (4.14.95-1) to root...
Downloading file:packages/kmod-usb2_4.14.95-1_mipsel_24kc.ipk
Installing kmod-usb-ehci (4.14.95-1) to root...
Downloading file:packages/kmod-usb-ehci_4.14.95-1_mipsel_24kc.ipk
Package libc (1.1.19-1) installed in root is up to date.
Package libgcc (7.3.0-1) installed in root is up to date.
Installing logd (2018-02-14-128bc35f-2) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/logd_2018-02-14-128bc35f-2_mipsel_24kc.ipk
Installing mtd (23) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/targets/ramips/mt76x8/packages/mtd_23_mipsel_24kc.ipk
Package netifd (2019-01-31-a2aba5c7-2.1) installed in root is up to date.
Installing odhcp6c (2018-07-14-67ae6a71-15) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/odhcp6c_2018-07-14-67ae6a71-15_mipsel_24kc.ipk
Installing odhcpd-ipv6only (1.15-3) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/odhcpd-ipv6only_1.15-3_mipsel_24kc.ipk
Installing opkg (2020-01-25-c09fe209-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/opkg_2020-01-25-c09fe209-1_mipsel_24kc.ipk
Installing libuclient (2018-11-24-3ba74ebc-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/libuclient_2018-11-24-3ba74ebc-1_mipsel_24kc.ipk
Installing uclient-fetch (2018-11-24-3ba74ebc-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/uclient-fetch_2018-11-24-3ba74ebc-1_mipsel_24kc.ipk
Installing libpthread (1.1.19-1) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/targets/ramips/mt76x8/packages/libpthread_1.1.19-1_mipsel_24kc.ipk
Installing ppp (2.4.7-13) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/ppp_2.4.7-13_mipsel_24kc.ipk
Installing kmod-lib-crc-ccitt (4.14.95-1) to root...
Downloading file:packages/kmod-lib-crc-ccitt_4.14.95-1_mipsel_24kc.ipk
Installing kmod-slhc (4.14.95-1) to root...
Downloading file:packages/kmod-slhc_4.14.95-1_mipsel_24kc.ipk
Installing kmod-ppp (4.14.95-1) to root...
Downloading file:packages/kmod-ppp_4.14.95-1_mipsel_24kc.ipk
Installing ppp-mod-pppoe (2.4.7-13) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/ppp-mod-pppoe_2.4.7-13_mipsel_24kc.ipk
Installing kmod-pppox (4.14.95-1) to root...
Downloading file:packages/kmod-pppox_4.14.95-1_mipsel_24kc.ipk
Installing kmod-pppoe (4.14.95-1) to root...
Downloading file:packages/kmod-pppoe_4.14.95-1_mipsel_24kc.ipk
Installing swconfig (11) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/swconfig_11_mipsel_24kc.ipk
Installing uci (2019-05-17-f199b961-2) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/uci_2019-05-17-f199b961-2_mipsel_24kc.ipk
Package uclient-fetch (2018-11-24-3ba74ebc-1) installed in root is up to date.
Installing wpad-mini (2018-05-21-62566bc2-8) to root...
Downloading http://downloads.openwrt.org/releases/18.06.2/packages/mipsel_24kc/base/wpad-mini_2018-05-21-62566bc2-8_mipsel_24kc.ipk
Configuring terminfo.
Configuring libubox.
Configuring libuclient.
Configuring uclient-fetch.
Configuring libpthread.
Configuring opkg.
Configuring kmod-nls-base.
Configuring kmod-usb-core.
Configuring libubus.
Configuring libjson-c.
Configuring libblobmsg-json.
Configuring ubusd.
Configuring ubus.
Configuring busybox.
Configuring kmod-nf-reject6.
Configuring libncurses.
Configuring libreadline.
Configuring bash.
Configuring libuci.
Configuring libnl-tiny.
Configuring swconfig.
Configuring libmbedtls.
Configuring ca-bundle.
Configuring libcurl.
Configuring kmod-nf-conntrack.
Configuring kmod-nf-flow.
Configuring kmod-lib-crc-ccitt.
Configuring kmod-slhc.
Configuring kmod-ppp.
Configuring kmod-pppox.
Configuring kmod-pppoe.
Configuring iw-full.
Configuring kmod-nf-reject.
Configuring kmod-nf-ipt.
Configuring kmod-ipt-core.
Configuring kmod-ipt-conntrack.
Configuring jshn.
Configuring netifd.
Configuring libjson-script.
Configuring ubox.
Configuring procd.
Configuring jsonfilter.
Configuring usign.
Configuring openwrt-keyring.
Configuring fstools.
Configuring fwtool.
Configuring base-files.
Configuring kmod-nf-nat.
Configuring kmod-usb-ohci.
Configuring dnsmasq.
Configuring wireless-regdb.
Configuring kmod-cfg80211.
Configuring hostapd-common.
Configuring kmod-mac80211.
Configuring kmod-mt76-core.
Configuring kmod-mt76x02-common.
Configuring kmod-mt76x2-common.
Configuring kmod-mt76x2.
Configuring kmod-mt7603.
Configuring kmod-mt76.
Configuring kmod-usb-ehci.
Configuring kmod-usb2.
Configuring libxtables.
Configuring libip4tc.
Configuring libip6tc.
Configuring kmod-nf-conntrack6.
Configuring kmod-ipt-nat.
Configuring firewall.
Configuring kmod-nf-ipt6.
Configuring kmod-ip6tables.
Configuring odhcp6c.
Configuring uci.
Configuring wpad-mini.
Configuring dropbear.
Configuring curl.
Configuring mtd.
Configuring odhcpd-ipv6only.
Configuring ppp.
Configuring kmod-leds-gpio.
Configuring kmod-gpio-button-hotplug.
Configuring logd.
Configuring iptables.
Configuring ip6tables.
Configuring bc.
Configuring kmod-ipt-offload.
Configuring ppp-mod-pppoe.
Finalizing root filesystem...
Building images...
Unable to open feeds configuration at /home/alby/openwrt-imagebuilder-18.06.2-ramips-mt76x8.Linux-x86_64/scripts/feeds line 48.
Parallel mksquashfs: Using 1 processor
Creating 4.0 filesystem on /home/alby/openwrt-imagebuilder-18.06.2-ramips-mt76x8.Linux-x86_64/build_dir/target-mipsel_24kc_musl/linux-ramips_mt76x8/root.squashfs, block size 262144.
Pseudo file "/dev" exists in source filesystem "/home/alby/openwrt-imagebuilder-18.06.2-ramips-mt76x8.Linux-x86_64/build_dir/target-mipsel_24kc_musl/root-ramips/dev".
Ignoring, exclude it (-e/-ef) to override.
[=========================================================================================/] 619/619 100%
Exportable Squashfs 4.0 filesystem, xz compressed, data block size 262144
compressed data, compressed metadata, compressed fragments, no xattrs
duplicates are removed
Filesystem size 2810.27 Kbytes (2.74 Mbytes)
38.90% of uncompressed filesystem size (7223.44 Kbytes)
Inode table size 6520 bytes (6.37 Kbytes)
21.56% of uncompressed inode table size (30238 bytes)
Directory table size 8878 bytes (8.67 Kbytes)
48.24% of uncompressed directory table size (18405 bytes)
Number of duplicate files found 92
Number of inodes 906
Number of files 617
Number of fragments 22
Number of symbolic links 209
Number of device nodes 1
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 79
Number of ids (unique uids + gids) 1
Number of uids 1
root (0)
Number of gids 1
root (0)
2809+1 records in
2809+1 records out
1438302 bytes (1.4 MB, 1.4 MiB) copied, 0.0180035 s, 79.9 MB/s
5620+1 records in
5620+1 records out
2877714 bytes (2.9 MB, 2.7 MiB) copied, 0.0332544 s, 86.5 MB/s
padding image to 0041e000
padding image to 00420000
padding image to 00440000
Calculating checksums...
So I'll poke around a bit and see if I can find the issue, or even if this is a problem at all, it may just be a harmless error.
Seems like he extracted the image builder in
/clients/18.06.2-ramips-mt300n-v2
and the Copying xxxxxx is just the Image Builder that is pulling the packages from the dl folder instead than downloading again.
For example if I run again the same command as above, my imagebuilder also fetches the packages from the dl folder
Installing packages...
Installing libc (1.1.19-1) to root...
Installing libgcc (7.3.0-1) to root...
Copying /home/alby/openwrt-imagebuilder-18.06.2-ramips-mt76x8.Linux-x86_64/dl/libgcc_7.3.0-1_mipsel_24kc.ipk.
Configuring libgcc.
Configuring libc.
Installing kernel (4.14.95-1-fa0ac614032ecce6935c8737b30999bb) to root...
Configuring kernel.
Installing bash (4.4.18-2) to root...
Copying /home/alby/openwrt-imagebuilder-18.06.2-ramips-mt76x8.Linux-x86_64/dl/bash_4.4.18-2_mipsel_24kc.ipk.
Installing terminfo (6.1-1) to root...
Copying /home/alby/openwrt-imagebuilder-18.06.2-ramips-mt76x8.Linux-x86_64/dl/terminfo_6.1-1_mipsel_24kc.ipk.
roger... makes sense now... apologies...
You were ignoring my request and stating that "it is not important" to solve your issue.
This is "not cooperating" and "thinking you know more than me".
Never ignored anything, you started making it personal and it became hard to focus on facts and the technology instead of the childish games. You keep trying to find 'weird' things that I'm doing and if I said 'not important', I mean I'm trying not to complicate the post with too many details that are not very relevant.
When I post, I always post with as much detail as is relevant in case it's a simple fix. No one wants to find a thread they have to read dozens and dozens of pages to get to some point. That's why I ended up posting here in fact, got tired of reading post after post and not finding answers.
Can we stop with the personal attacks now and get on with the question?
I have a little tree structure that I maintain different versions in, that's why you see /clients. Not relevant.
I use the files directory when I want to have custom configs. I didn't need it to show the problem in this post so didn't use it as it is non relevant.
I usually use a little script so I don't forget which packages I want to have or not have installed but in this case, to keep things simple, I used the command line so I could show you the error. Non relevant.
are you hardlinking or something?
just showing this in your OP would have saved us all alot of time...
Just showing what? There is no hard linking, there is nothing unusual about what I'm doing.
I download the openwrt IB package, untar it, rename it to the version so I know what it is, go into it and generate what I need.
Although you did not say where you downloaded the image builder from. I assume you
used official release builds.
I would have mentioned if I got it from somewhere else. In fact, I would have then tried an official repo version before posting to see if there was a difference.
and the
Copying xxxxxxis just the Image Builder that is pulling the packages from the dl
folder instead than downloading again.
I don't know what you mean by this. I have not changed anything, paths, scripts, have not added packages manually, nothing. I simply downloaded the IB package, untared it and ran the command I showed you to build the fw.
I did find some posts from others suggesting you download the entire package tree and put it into the build environment (or what ever it's called for IB) so they would not need to be downloaded and that is all my original question was asking about.
which thread is your favourite out of this one and your other one?
They are two different questions but somehow related, maybe.
This post was simply asking where do you put manually downloaded packaged. That's all I wanted to know so I could see why the packages are not showing up after I build the fw. I wondered if pre-downloading all of the packages would make any difference. I've not tried that yet because it is still not clear to me where you would put all of the packages.
The other post was asking why when I build using 19.x.x, I can see the packages I want being downloaded, installed and enabled but when I fire up the fw, those packages do not exist but some of their config files do.
my bad with the /client path thing...
its unlikely there is a correlation between absence of package stuff in firmware vs builder package locations... with recommended practices... you only place 'extra' non-official (or preferred) ipks in the 'packages' folder...
anything in addition to that is 'non-standard' and you'd have to ask the people who advised you to do so...
and you get people asking for more info every single time. I've looked at your post history and maybe you should too.
maybe it is language barrier, I don't know.
I was explaining to wulfy23 what the Image Builder is doing when you see lines that start with Copying.
The image builder is leaving the packages in the dl folder and will not download them again if the version is not different. This saves download bandwith for download server.
So the first time you run IB it downloads the package and you see
Downloading http://downloads.openwrt.org/releases/18.06.2/targets/ramips/mt76x8/packages/libgcc_7.3.0-1_mipsel_24kc.ipk
Configuring libgcc.
the second (and any other) time you see
Copying /home/alby/openwrt-imagebuilder-18.06.2-ramips-mt76x8.Linux-x86_64/dl/libgcc_7.3.0-1_mipsel_24kc.ipk.
Configuring libgcc.
because it is just taking the package from the dl folder.
I think I told you. All the packages go in the dl folder.
In your folder structure, it should be /clients/18.06.2-ramips-mt300n-v2/dl
But I do not think this is a solution. The failure is not at package install stage but later.
Aha, found it. The error Unable to open feeds configuration at /scripts/feeds line 48. is harmless spam.
It is not a real error, you can ignore it.
It was removed in more recent image builders to not confuse users with an error message.
I do not get that with latest image builder from 19.07 and 21.02-rc3.
So that is not connected to issues you have.
This is the commit
build: suppress error output in feeds.mk
If no feed.conf or feeds.conf.default is found on image generation with
the imagebuilder we always get the following message "Unable to open
feeds configuration at /scripts/feeds line 48." on std error.
To get rid off this needless warning on image generation with the
imagebuilder supress the output in feeds.mk.
I do not get that with latest image builder from 19.07 and 21.02-rc3.
I mentioned that a while back too, that it only happens in older versions that I maintain. This was not my question anyhow.
I think I told you. All the packages go in the dl folder.
Um, yes, you said that but it never answered my original question.
This is what you said in your last couple of comments.
Btw, the folder where all packages are downloaded is "dl"
for example with the x86 target image builder
I know that the downloads go into the dl directory but that's never been my question. I asked from the start, where do manually downloaded packages go.
Someone else said in the packages directory which is what I was thinking before I even posted this question but could not find anything that shows how the structure works.
Meaning, I can see the packages in the packages/ directory but there is no sub-folder structure. I'm guessing that all of the different packages for things like base, luci, telephony etc which are sub-directories don't all go in that one packages/ directory.
manually downloaded packages go in the same folder. There is ONE folder for all packages from the feeds and it is called dl. Manually downloaded, automatically downloaded. All feed packages go there.
I still give you instructions for what you wrote in the first post
"I decided to download all of the packages but I'm not finding any information on where I need to put them in the build env"
If you want to add packages that are NOT in official OpenWrt feeds the procedure is different.
The Packages directory contains the kernel and some core packages. It is like the dl folder, but only for them.
It is the "packages" folder you see in the bottom table of this page https://archive.openwrt.org/releases/18.06.2/targets/ramips/mt76x8/
this is the direct link to that page https://archive.openwrt.org/releases/18.06.2/targets/ramips/mt76x8/packages/
There is no structure, the Image Builder does not need a structure, it finds the files by name, using the package list files.
If you run the imagebuilder with this command
make image PROFILE="gl-mt300n-v2" PACKAGES="bash bc curl vnstat zabbix-agentd luci"
then you can see luci packages in dl folder, see below
alby@buildbot:~/openwrt-imagebuilder-19.07.7-ramips-mt76x8.Linux-x86_64/dl> ls
base-files_204.2-r11306-c4a6851c72_mipsel_24kc.ipk
bash_5.0-4_mipsel_24kc.ipk
bc_1.06.95-1_mipsel_24kc.ipk
busybox_1.30.1-6_mipsel_24kc.ipk
ca-bundle_20200601-1_all.ipk
cgi-io_19_mipsel_24kc.ipk
curl_7.66.0-3_mipsel_24kc.ipk
dnsmasq_2.80-16.3_mipsel_24kc.ipk
dropbear_2019.78-2_mipsel_24kc.ipk
firewall_2019-11-22-8174814a-3_mipsel_24kc.ipk
fstools_2020-05-12-84269037-1_mipsel_24kc.ipk
fwtool_2_mipsel_24kc.ipk
getrandom_2019-06-16-4df34a4d-4_mipsel_24kc.ipk
hostapd-common_2019-08-08-ca8c2bd2-7_mipsel_24kc.ipk
imagebuilder
ip6tables_1.8.3-1_mipsel_24kc.ipk
iptables_1.8.3-1_mipsel_24kc.ipk
iw-full_5.0.1-1_mipsel_24kc.ipk
jshn_2020-05-25-66195aee-1_mipsel_24kc.ipk
jsonfilter_2018-02-04-c7e938d6-1_mipsel_24kc.ipk
libblobmsg-json_2020-05-25-66195aee-1_mipsel_24kc.ipk
libcurl4_7.66.0-3_mipsel_24kc.ipk
libgcc1_7.5.0-2_mipsel_24kc.ipk
libip4tc2_1.8.3-1_mipsel_24kc.ipk
libip6tc2_1.8.3-1_mipsel_24kc.ipk
libiwinfo20181126_2019-10-16-07315b6f-1_mipsel_24kc.ipk
libiwinfo-lua_2019-10-16-07315b6f-1_mipsel_24kc.ipk
libjson-c2_0.12.1-3.1_mipsel_24kc.ipk
libjson-script_2020-05-25-66195aee-1_mipsel_24kc.ipk
liblua5.1.5_5.1.5-3_mipsel_24kc.ipk
liblucihttp0_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
liblucihttp-lua_2019-07-05-a34a17d5-1_mipsel_24kc.ipk
libmbedtls12_2.16.10-1_mipsel_24kc.ipk
libncurses6_6.1-5_mipsel_24kc.ipk
libnl-tiny_0.1-5_mipsel_24kc.ipk
libpcre_8.43-1_mipsel_24kc.ipk
libpthread_1.1.24-2_mipsel_24kc.ipk
libreadline8_8.0-1_mipsel_24kc.ipk
libubox20191228_2020-05-25-66195aee-1_mipsel_24kc.ipk
libubus20191227_2019-12-27-041c9d1c-1_mipsel_24kc.ipk
libubus-lua_2019-12-27-041c9d1c-1_mipsel_24kc.ipk
libuci20130104_2019-09-01-415f9e48-4_mipsel_24kc.ipk
libuclient20160123_2020-06-17-51e16ebf-1_mipsel_24kc.ipk
libxtables12_1.8.3-1_mipsel_24kc.ipk
logd_2019-06-16-4df34a4d-4_mipsel_24kc.ipk
lua_5.1.5-3_mipsel_24kc.ipk
luci-app-firewall_git-21.189.23240-7b931da-1_all.ipk
luci-app-opkg_git-21.189.23240-7b931da-1_all.ipk
luci-base_git-21.189.23240-7b931da-1_mipsel_24kc.ipk
luci_git-21.189.23240-7b931da-1_all.ipk
luci-lib-ip_git-21.189.23240-7b931da-1_mipsel_24kc.ipk
luci-lib-jsonc_git-21.189.23240-7b931da-1_mipsel_24kc.ipk
luci-lib-nixio_git-21.189.23240-7b931da-1_mipsel_24kc.ipk
luci-mod-admin-full_git-21.189.23240-7b931da-1_all.ipk
luci-mod-network_git-21.189.23240-7b931da-1_all.ipk
luci-mod-status_git-21.189.23240-7b931da-1_mipsel_24kc.ipk
luci-mod-system_git-21.189.23240-7b931da-1_all.ipk
luci-proto-ipv6_git-21.189.23240-7b931da-1_all.ipk
luci-proto-ppp_git-21.189.23240-7b931da-1_all.ipk
luci-theme-bootstrap_git-21.189.23240-7b931da-1_all.ipk
mtd_24_mipsel_24kc.ipk
netifd_2021-01-09-753c351b-1_mipsel_24kc.ipk
odhcp6c_2021-01-09-64e1b4e7-16_mipsel_24kc.ipk
odhcpd-ipv6only_2020-05-03-49e4949c-3_mipsel_24kc.ipk
openwrt_base
openwrt_core
openwrt_freifunk
openwrt-keyring_2021-02-20-49283916-2_mipsel_24kc.ipk
openwrt_luci
openwrt_packages
openwrt_routing
openwrt_telephony
opkg_2021-01-31-c5dccea9-1_mipsel_24kc.ipk
ppp_2.4.7.git-2019-05-25-3_mipsel_24kc.ipk
ppp-mod-pppoe_2.4.7.git-2019-05-25-3_mipsel_24kc.ipk
procd_2020-03-07-09b9bd82-1_mipsel_24kc.ipk
rpcd_2020-05-26-67c8a3fd-1_mipsel_24kc.ipk
rpcd-mod-file_2020-05-26-67c8a3fd-1_mipsel_24kc.ipk
rpcd-mod-iwinfo_2020-05-26-67c8a3fd-1_mipsel_24kc.ipk
rpcd-mod-luci_20201107_mipsel_24kc.ipk
rpcd-mod-rrdns_20170710_mipsel_24kc.ipk
swconfig_12_mipsel_24kc.ipk
terminfo_6.1-5_mipsel_24kc.ipk
ubox_2019-06-16-4df34a4d-4_mipsel_24kc.ipk
ubus_2019-12-27-041c9d1c-1_mipsel_24kc.ipk
ubusd_2019-12-27-041c9d1c-1_mipsel_24kc.ipk
uci_2019-09-01-415f9e48-4_mipsel_24kc.ipk
uclient-fetch_2020-06-17-51e16ebf-1_mipsel_24kc.ipk
uhttpd_2020-10-01-3abcc891-1_mipsel_24kc.ipk
urandom-seed_1.0-1_mipsel_24kc.ipk
urngd_2020-01-21-c7f7b6b6-1_mipsel_24kc.ipk
usign_2020-05-23-f1f65026-1_mipsel_24kc.ipk
vnstat_1.18-2_mipsel_24kc.ipk
wireless-regdb_2020.11.20-1_all.ipk
wpad-basic_2019-08-08-ca8c2bd2-7_mipsel_24kc.ipk
zabbix-agentd_4.0.16-3_mipsel_24kc.ipk
zlib_1.2.11-3_mipsel_24kc.ipk
Yes, I see them in there. So in the end, you are simply saying that any packages I manually download should go into the dl folder. Ok, no problem but I was actually asking about the entire tree. Maybe that is not how openwrt does it anymore. There used to be a packages directory and in there, sub-folders with additional packages.
Anyhow, all good I think since I only wanted to have the packages I want to install in the dl directory so don't need every single package I won't be installing. I just wanted to try that as a test to try and find a lead on the problem in the other post.
That's the build system. If you download the full build system from github and compile from sources, in the compiled binary folder you have the folder with the firmware image AND a packages folder with a tree like that because it splits packages by feed, and each folder has a package list file.
If you take the folders and load them on a server, each folder is a working package feed that can be used by a device (or image builder) to download packages from.
That is how OpenWrt download server actually works, the build bots just copy over the folders to the download servers.
Image builder is not creating feed folders, it is just making a firmware image. So it does not split packages in a tree. It only needs to cache the packages, and a single folder is fine for that.
I was going to ask that too thinking that might be the case. Good, this part is solved, thank you for helping.
I wanted to save someone the trouble of reading most of this pointless thread by editing my first post as follows.
SOLVED
When using image builder, put your downloaded files in the dl directory.
When using source, put your packages in the packages folder and sub-folders.
Thank you. I'm absolutely sure folks that find this will appreciate knowing the answer in the first post.