I have the ver. A of this router. Using info from the patches that @XT-Martinez , who has the ver. B, posted ( https://github.com/XT-Martinez/openwrt/commit/e5d9e121600d1dc2d81a82fa0a8264397e3b5ff3 ) I was finally able to get this up and running. What I have found out is the snapshot sysupgrade file th…

New topic: [image] Wavlink WL-WN586X3 ver. a -- installation advice Installing and Using OpenWrt These are cheap decent filogic routers for OpenWrt. There is however a bit of trouble getting it to load due to the fact that they were made with at least two 16MB…

When you edit such an old post (especially one with no replies), it's difficult to follow. I'm glad you got it working. Is this device officially supported?

Just thought it would be better than starting another thread. So, technically it is supported but the images that are created currently in snapshot are incorrect.

this is my snapshot dts file. the one for 24.10 is slightly different and is in my google drive link below.(25-11-29)... // SPDX-License-Identifier: (GPL-2.0 OR MIT) /dts-v1/; #include <dt-bindings/pinctrl/mt65xx.h> #include "mt7981b.dtsi" / { model = "WAVLINK WL-WN586X3"; compatible = "wavli…

Updated filogic.mk file. (25-11-29) define Device/wavlink_wl-wn586x3 DEVICE_VENDOR := WAVLINK DEVICE_MODEL := WL-WN586X3 DEVICE_DTS := mt7981b-wavlink-wl-wn586x3 DEVICE_DTS_DIR := ../dts DEVICE_DTS_LOADADDR := 0x47000000 DEVICE_PACKAGES := kmod-mt7915e kmod-mt7981-firmware mt7981-wo-fir…

Hi, I’ve bought the WN586X3 Rev A with BY25Q128AS. I followed the guide and tried both method (1,2) but I’m stuck with bootloop. Now I’m connected to the router with UART and I can use U-Boot. Please help me to get openwrt working. I don’t know what to do to get the FLASH supported. If I understand…

I managed to build snapshot build with Kernel Patch and DTS and flashed it with UART. The problem is that wifi is not working: the wireless card is not detected and this is the issue in the log. I’ve removed the two line as you suggested: nvmem-cells = <&eeprom_factory_0>; nvmem-cell-names = "eep…

I readded the last two lines and now Wifi is working! Using iperf3 between a PC connected to Gbit ethernet and a wifi 6 ax devices, I’ve found that I am getting 940Mbit speed but every 10seconds it drops to 100Mbit for 3 seconds and then up to full speed. I’ve noticed in htop that the cpu drops fro…

Wavlink WL-WN586X3 ver. A sysupgrade files are wrong

Installing and Using OpenWrt

dadogroove December 6, 2025, 7:38pm 16

New topic: