WA850RE-V2 password

Hello. I found a memory dump from TP Link 841n on the Internet for a similar 850re v2, but the console asks for a password and the standard ones do not match. Is it possible to somehow extract the password from the dump file?

Are you trying to install OpenWrt on this device?

1 Like

Booting image at 9f020000 ...

Uncompressing Kernel Image ... OK

Starting kernel ...

[ 0.000000] Linux version 4.4.42 (walter@freifunkvm) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3006-ef08595) ) #0 Mon Jan 23 13:56:20 2017
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[ 0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] No valid device tree found, continuing without
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: board=TL-WA850RE-v2 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 59836K/65536K available (3174K kernel code, 178K rwdata, 788K rodata, 332K init, 208K bss, 5700K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Clocks: CPU:550.000MHz, DDR:392.724MHz, AHB:196.362MHz, Ref:25.000MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6950037990 ns
[ 0.000010] sched_clock: 32 bits at 275MHz, resolution 3ns, wraps every 7809031678ns
[ 0.008382] Console: colour dummy device 80x25
[ 0.013092] Calibrating delay loop... 366.18 BogoMIPS (lpj=1830912)
[ 0.071067] pid_max: default: 32768 minimum: 301
[ 0.076076] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.083058] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.093582] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.105494] NET: Registered protocol family 16
[ 0.112135] MIPS: machine is TP-LINK TL-WA850RE v2
[ 0.117345] ar71xx: invalid MDIO id 1
[ 0.355132] clocksource: Switched to clocksource MIPS
[ 0.368246] NET: Registered protocol family 2
[ 0.373903] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.381332] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.388055] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.394872] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.401080] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.408073] NET: Registered protocol family 1
[ 0.428049] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.434604] Crashlog allocated RAM at address 0x3f00000
[ 0.458246] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.464409] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.477829] io scheduler noop registered
[ 0.481979] io scheduler deadline registered (default)
[ 0.487786] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.497727] console [ttyS0] disabled
[ 0.521667] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
[ 0.530780] console [ttyS0] enabled
[ 0.530780] console [ttyS0] enabled
[ 0.538339] bootconsole [early0] disabled
[ 0.538339] bootconsole [early0] disabled
[ 0.553048] m25p80 spi0.0: found w25q128, expected m25p80
[ 0.558722] m25p80 spi0.0: w25q128 (16384 Kbytes)
[ 0.564930] 5 tp-link partitions found on MTD device spi0.0
[ 0.570742] Creating 5 MTD partitions on "spi0.0":
[ 0.575707] 0x000000000000-0x000000020000 : "u-boot"
[ 0.582522] 0x000000020000-0x000000174764 : "kernel"
[ 0.589641] 0x000000174764-0x000000ff0000 : "rootfs"
[ 0.596702] mtd: device 2 (rootfs) set to be root filesystem
[ 0.602599] 1 squashfs-split partitions found on MTD device rootfs
[ 0.609063] 0x000000370000-0x000000ff0000 : "rootfs_data"
[ 0.616634] 0x000000ff0000-0x000001000000 : "art"
[ 0.623379] 0x000000020000-0x000000ff0000 : "firmware"
[ 1.216199] ag71xx ag71xx.0: invalid speed specified
[ 1.221387] ag71xx: probe of ag71xx.0 failed with error -22
[ 1.229236] NET: Registered protocol family 10
[ 1.237481] NET: Registered protocol family 17
[ 1.242180] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.255424] 8021q: 802.1Q VLAN Support v1.8
[ 1.268980] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 1.278611] Freeing unused kernel memory: 332K (8046d000 - 804c0000)
[ 2.319678] init: Console is alive
[ 2.323441] init: - watchdog -
[ 3.654087] usbcore: registered new interface driver usbfs
[ 3.659954] usbcore: registered new interface driver hub
[ 3.665596] usbcore: registered new device driver usb
[ 3.677319] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.686060] ehci-platform: EHCI generic platform driver
[ 3.694804] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.702872] ohci-platform: OHCI generic platform driver
[ 3.711811] init: - preinit -
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 7.571306] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[ 7.582965] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 7.704212] procd: - early -
[ 7.708184] procd: - watchdog -
[ 8.526357] procd: - ubus -
[ 8.719102] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[ 8.729001] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[ 8.738469] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[ 8.748256] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[ 8.757678] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[ 8.767251] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[ 8.776873] random: ubusd: uninitialized urandom read (4 bytes read, 14 bits of entropy available)
[ 8.786724] procd: - init -
Please press Enter to activate this console.
[ 9.199411] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 9.206786] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 9.218399] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 9.240198] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
[ 9.248110] Backport generated by backports.git backports-20160324-9-g0e38f5c
[ 9.259419] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.275704] nf_conntrack version 0.5.0 (940 buckets, 3760 max)
[ 9.323925] xt_time: kernel timezone is -0000
[ 9.399318] PPP generic driver version 2.4.2
[ 9.406835] NET: Registered protocol family 24
[ 9.473860] Data bus error, epc == 83222108, ra == 83222104
[ 9.479639] Oops[#1]:
[ 9.481999] CPU: 0 PID: 591 Comm: kmodloader Not tainted 4.4.42 #0
[ 9.488383] task: 838b6840 ti: 83bd4000 task.ti: 83bd4000
[ 9.493951] $ 0 : 00000000 00000001 00000500 00000500
[ 9.499388] $ 4 : b81143fc 000143fc 83141de0 00000004
[ 9.504818] $ 8 : 00000001 7c7c3c7c 7c7c7c7c 7c7c7c7c
[ 9.510247] $12 : 7c7c3c7c 00000013 00000000 7c7c7c3c
[ 9.515678] $16 : 83000010 00000000 00030000 00000300
[ 9.521108] $20 : 00000400 00010000 00000004 000003ff
[ 9.526537] $24 : 00000000 00000007
[ 9.531967] $28 : 83bd4000 83bd5a18 83bd5a74 83222104
[ 9.537397] Hi : 00000003
[ 9.540372] Lo : 000000ff
[ 9.543412] epc : 83222108 ath9k_hw_setup_statusring+0xdf4/0x2298 [ath9k_hw]
[ 9.550885] ra : 83222104 ath9k_hw_setup_statusring+0xdf0/0x2298 [ath9k_hw]
[ 9.558336] Status: 1000c403 KERNEL EXL IE
[ 9.562684] Cause : 1080001c (ExcCode 07)
[ 9.566823] PrId : 00019374 (MIPS 24Kc)
[ 9.570871] Modules linked in: ath9k(+) ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ledtrig_usbport ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables e1000 ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[ 9.639377] Process kmodloader (pid: 591, threadinfo=83bd4000, task=838b6840, tls=774ffe50)
[ 9.647999] Stack : 83bd5a76 832222d8 00000000 00000002 00000030 80065040 00000000 00000018
83220000 83000010 83000038 83220000 8399c000 83220000 83bd5b2c 00000001
00000001 8322135c 00002710 83155964 00000001 00000007 0000021f ffffffff
83000010 83222520 800c2a88 8320393c 1000c403 00000000 83000010 00020000
00007000 00000500 8044d260 83000038 b8100000 83000438 830c1c8a 83000010
...
[ 9.684988] Call Trace:
[ 9.687536] [<83222108>] ath9k_hw_setup_statusring+0xdf4/0x2298 [ath9k_hw]
[ 9.694666] [<83222104>] ath9k_hw_setup_statusring+0xdf0/0x2298 [ath9k_hw]
[ 9.701771]
[ 9.703308]
Code: 00c0f809 02002021 8e0201e4 <10530004> 26450018 14540002 26a55f18 26450018 240203e8
[ 9.713653] ---[ end trace d10c35eec98baca6 ]---
[ 9.720230] Fatal exception: panic in 5 seconds
[ 14.725143] Kernel panic - not syncing: Fatal exception
[ 14.731834] Rebooting in 1 seconds..

U-Boot 1.1.4 (Dec 28 2017 - 14:52:25)

ap143 - Honey Bee 2.0

DRAM: 64 MB
Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x18
flash size 4MB, sector count = 64
Flash: 4 MB
Using default environment

In: serial
Out: serial
Err: serial
Net: ath_gmac_enet_initialize...
ath_gmac_enet_initialize: reset mask:c02200
Scorpion ---->S27 PHY*
S27 reg init
GMAC: cfg1 0x800c0000 cfg2 0x7114
eth0: ba:be:fa:ce:08:41
athrs27_phy_setup ATHR_PHY_CONTROL 4 :0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 4 :0x10
eth0 up
Honey Bee ----> MAC 1 S27 PHY *
S27 reg init
ATHRS27: resetting s27
ATHRS27: s27 reset done
GMAC: cfg1 0x800c0000 cfg2 0x7214
eth1: ba:be:fa:ce:08:41
athrs27_phy_setup ATHR_PHY_CONTROL 0 :0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 0 :0x10
athrs27_phy_setup ATHR_PHY_CONTROL 1 :0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 1 :0x10
athrs27_phy_setup ATHR_PHY_CONTROL 2 :0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 2 :0x10
athrs27_phy_setup ATHR_PHY_CONTROL 3 :0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 3 :0x10
eth1 up
eth0, eth1
Setting 0x181162c0 to 0x4b97a100
Autobooting in 1 seconds

Booting image at 9f020000 ...

Uncompressing Kernel Image ... OK

Starting kernel ...

[ 0.000000] Linux version 4.4.42 (walter@freifunkvm) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3006-ef08595) ) #0 Mon Jan 23 13:56:20 2017
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
[ 0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] No valid device tree found, continuing without
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000003ffffff]
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: board=TL-WA850RE-v2 console=ttyS0,115200 rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 59836K/65536K available (3174K kernel code, 178K rwdata, 788K rodata, 332K init, 208K bss, 5700K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.000000] Clocks: CPU:550.000MHz, DDR:392.724MHz, AHB:196.362MHz, Ref:25.000MHz
[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6950037990 ns
[ 0.000010] sched_clock: 32 bits at 275MHz, resolution 3ns, wraps every 7809031678ns
[ 0.008382] Console: colour dummy device 80x25
[ 0.013092] Calibrating delay loop... 366.18 BogoMIPS (lpj=1830912)
[ 0.071067] pid_max: default: 32768 minimum: 301
[ 0.076076] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.083058] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.093579] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.105494] NET: Registered protocol family 16
[ 0.112135] MIPS: machine is TP-LINK TL-WA850RE v2
[ 0.117344] ar71xx: invalid MDIO id 1
[ 0.355136] clocksource: Switched to clocksource MIPS
[ 0.368249] NET: Registered protocol family 2
[ 0.373910] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.381340] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.388063] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.394881] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.401089] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.408081] NET: Registered protocol family 1
[ 0.428058] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 0.434612] Crashlog allocated RAM at address 0x3f00000
[ 0.458258] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.464425] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.477846] io scheduler noop registered
[ 0.481996] io scheduler deadline registered (default)
[ 0.487802] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.497742] console [ttyS0] disabled
[ 0.521684] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11, base_baud = 1562500) is a 16550A
[ 0.530797] console [ttyS0] enabled
[ 0.530797] console [ttyS0] enabled
[ 0.538356] bootconsole [early0] disabled
[ 0.538356] bootconsole [early0] disabled
[ 0.553065] m25p80 spi0.0: found w25q128, expected m25p80
[ 0.558739] m25p80 spi0.0: w25q128 (16384 Kbytes)
[ 0.564946] 5 tp-link partitions found on MTD device spi0.0
[ 0.570758] Creating 5 MTD partitions on "spi0.0":
[ 0.575723] 0x000000000000-0x000000020000 : "u-boot"
[ 0.582538] 0x000000020000-0x000000174764 : "kernel"
[ 0.589658] 0x000000174764-0x000000ff0000 : "rootfs"
[ 0.596721] mtd: device 2 (rootfs) set to be root filesystem
[ 0.602615] 1 squashfs-split partitions found on MTD device rootfs
[ 0.609069] 0x000000370000-0x000000ff0000 : "rootfs_data"
[ 0.616640] 0x000000ff0000-0x000001000000 : "art"
[ 0.623383] 0x000000020000-0x000000ff0000 : "firmware"
[ 1.216203] ag71xx ag71xx.0: invalid speed specified
[ 1.221385] ag71xx: probe of ag71xx.0 failed with error -22
[ 1.229234] NET: Registered protocol family 10
[ 1.237485] NET: Registered protocol family 17
[ 1.242187] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.255432] 8021q: 802.1Q VLAN Support v1.8
[ 1.268988] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
[ 1.278619] Freeing unused kernel memory: 332K (8046d000 - 804c0000)
[ 2.319441] init: Console is alive
[ 2.323208] init: - watchdog -
[ 3.654049] usbcore: registered new interface driver usbfs
[ 3.659917] usbcore: registered new interface driver hub
[ 3.665561] usbcore: registered new device driver usb
[ 3.677286] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.686023] ehci-platform: EHCI generic platform driver
[ 3.694780] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.702852] ohci-platform: OHCI generic platform driver
[ 3.711789] init: - preinit -
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 6.563298] mount_root: jffs2 not ready yet, using temporary tmpfs overlay
[ 6.575042] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 6.697188] procd: - early -
[ 6.700300] procd: - watchdog -
[ 7.518150] procd: - ubus -
[ 7.710911] random: ubusd: uninitialized urandom read (4 bytes read, 12 bits of entropy available)
[ 7.720781] random: ubusd: uninitialized urandom read (4 bytes read, 12 bits of entropy available)
[ 7.730240] random: ubusd: uninitialized urandom read (4 bytes read, 12 bits of entropy available)
[ 7.740006] random: ubusd: uninitialized urandom read (4 bytes read, 12 bits of entropy available)
[ 7.749426] random: ubusd: uninitialized urandom read (4 bytes read, 12 bits of entropy available)
[ 7.758988] random: ubusd: uninitialized urandom read (4 bytes read, 12 bits of entropy available)
[ 7.768600] random: ubusd: uninitialized urandom read (4 bytes read, 12 bits of entropy available)
[ 7.778417] procd: - init -
Please press Enter to activate this console.
[ 8.191592] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 8.198964] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 8.210550] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.232149] Loading modules backported from Linux version wt-2016-10-03-1-g6fcb1a6
[ 8.240054] Backport generated by backports.git backports-20160324-9-g0e38f5c
[ 8.251540] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.267922] nf_conntrack version 0.5.0 (940 buckets, 3760 max)
[ 8.316203] xt_time: kernel timezone is -0000
[ 8.394107] PPP generic driver version 2.4.2
[ 8.401607] NET: Registered protocol family 24
[ 8.466128] Data bus error, epc == 83222108, ra == 83222104
[ 8.471907] Oops[#1]:
[ 8.474266] CPU: 0 PID: 590 Comm: kmodloader Not tainted 4.4.42 #0
[ 8.480650] task: 838b4a10 ti: 83bd6000 task.ti: 83bd6000
[ 8.486218] $ 0 : 00000000 00000001 00000500 00000500
[ 8.491656] $ 4 : b81143fc 000143fc 83141de0 00000004
[ 8.497085] $ 8 : 00000001 7c7c3c7c 7c7c7c7c 7c7c7c7c
[ 8.502515] $12 : 7c7c3c7c 00000013 00000000 7c7c7c3c
[ 8.507945] $16 : 83008010 00000000 00030000 00000300
[ 8.513375] $20 : 00000400 00010000 00000004 000003ff
[ 8.518805] $24 : 00000000 00000007
[ 8.524234] $28 : 83bd6000 83bd7a18 83bd7a74 83222104
[ 8.529665] Hi : 00000003
[ 8.532640] Lo : 000000ff
[ 8.535677] epc : 83222108 ath9k_hw_setup_statusring+0xdf4/0x2298 [ath9k_hw]
[ 8.543152] ra : 83222104 ath9k_hw_setup_statusring+0xdf0/0x2298 [ath9k_hw]
[ 8.550604] Status: 1000c403 KERNEL EXL IE
[ 8.554951] Cause : 5080801c (ExcCode 07)
[ 8.559091] PrId : 00019374 (MIPS 24Kc)
[ 8.563138] Modules linked in: ath9k(+) ath9k_common pppoe ppp_async iptable_nat ath9k_hw ath pppox ppp_generic nf_nat_ipv4 nf_conntrack_ipv6 nf_conntrack_ipv4 mac80211 ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables crc_ccitt compat ledtrig_usbport ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables e1000 ohci_platform ohci_hcd ehci_platform ehci_hcd gpio_button_hotplug usbcore nls_base usb_common
[ 8.631646] Process kmodloader (pid: 590, threadinfo=83bd6000, task=838b4a10, tls=77c87e50)
[ 8.640265] Stack : 83bd7a76 832222d8 8045fa58 00000000 00000000 00000000 00000000 00000018
83220000 83008010 83008038 83220000 8399c000 83220000 83bd7b2c 00000001
00000001 8322135c 00000000 00000000 00000000 00000000 0000021f ffffffff
83008010 83222520 00000004 80440000 00000004 8020cef8 83008010 00020000
00007000 00000500 8044d260 83008038 b8100000 83008438 830c1d8a 83008010
...
[ 8.677256] Call Trace:
[ 8.679803] [<83222108>] ath9k_hw_setup_statusring+0xdf4/0x2298 [ath9k_hw]
[ 8.686933] [<83222104>] ath9k_hw_setup_statusring+0xdf0/0x2298 [ath9k_hw]
[ 8.694039]
[ 8.695576]
Code: 00c0f809 02002021 8e0201e4 <10530004> 26450018 14540002 26a55f18 26450018 240203e8
[ 8.705960] ---[ end trace 1e8142df6e1fda8a ]---
[ 8.712530] Fatal exception: panic in 5 secondstpl
uci: Entry not found

BusyBox v1.25.1 () built-in shell (ash)

 _________
/        /\      _    ___ ___  ___

/ LE / \ | | | | | |
/ DE / \ | |
| _|| |) | _|
/
_/ LE \ |||/|| lede-project.org
\ \ DE /
\ LE \ / -----------------------------------------------------------
\ DE \ / Reboot (17.01-SNAPSHOT, r3007-b850218)
________/ -----------------------------------------------------------

=== WARNING! =====================================
There is no root password defined on this device!
Use the "passwd" command to set up a new password
in order to prevent unauthorized SSH logins.

root@(none):/#
[ 13.725147] Kernel panic - not syncing: Fatal exception
[ 13.731853] Rebooting in 1 seconds..

U-Boot 1.1.4 (Dec 28 2017 - 14:52:25)

ap143 - Honey Bee 2.0

DRAM: 64 MB
Flash Manuf Id 0xef, DeviceId0 0x40, DeviceId1 0x18
flash size 4MB, sector count = 64
Flash: 4 MB
Using default environment

In: serial
Out: serial
Err: serial
Net: ath_gmac_enet_initialize...
ath_gmac_enet_initialize: reset mask:c02200
Scorpion ---->S27 PHY*
S27 reg init
GMAC: cfg1 0x800c0000 cfg2 0x7114
eth0: ba:be:fa:ce:08:41
athrs27_phy_setup ATHR_PHY_CONTROL 4 :0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 4 :0x10
eth0 up
Honey Bee ----> MAC 1 S27 PHY *
S27 reg init
ATHRS27: resetting s27
ATHRS27: s27 reset done
GMAC: cfg1 0x800c0000 cfg2 0x7214
eth1: ba:be:fa:ce:08:41
athrs27_phy_setup ATHR_PHY_CONTROL 0 :0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 0 :0x10
athrs27_phy_setup ATHR_PHY_CONTROL 1 :0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 1 :0x10
athrs27_phy_setup ATHR_PHY_CONTROL 2 :0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 2 :0x10
athrs27_phy_setup ATHR_PHY_CONTROL 3 :0x1000
athrs27_phy_setup ATHR_PHY_SPEC_STAUS 3 :0x10
eth1 up
eth0, eth1
Setting 0x181162c0 to 0x4b97a100
Autobooting in 1 seconds
honeybee>
honeybee>

Maybe I should ask again...

1 Like

Yes. also ] Fatal exception: panic in 5 secondstpl
uci: Entry not found

Which specific device do you have? (model and version)? I just want to verify that you're talking about the WA850REv2 (and not the 841n that you mentioned in the first post)

Note that these devices are 4/32 and are unsupported by any modern version of OpenWrt.

See the device info page for information about what you can install and how...

Last paste from boot loader output says 4mb flash ...

what's odd here is that the device info page I lined shows all variants are 4/32. Here is is 4/64 apparently.

However, that doesn't change much... 4MB isn't enough.

1 Like