I have an Archer C7 v2, I installed openconnect but I think I don't know how to configure.
Openwrt is working as 'switch' in my network and Fiber Router is my main dhcp. I stopped firewall, dnsmasq and dhcp on Archer C7 with openwrt. I opened correctly port for vpn access and I connect, I get ip address 192.168.100.1 and I can reach Archer C7 192.168.1.7 but I cant get internet access or enter in fiber router 192.168.1.1 web admin
In OpenConnect Routing table I put
IP Address
192.168.1.0
Netmask (or IPv6-prefix)
255.255.255.0
But seems not working
My config:
package network
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fd35:a6b1:f010::/48'
config interface 'lan'
option type 'bridge'
option proto 'static'
option netmask '255.255.255.0'
option ip6assign '60'
option ipaddr '192.168.1.7'
option gateway '192.168.1.1'
option ifname 'eth0 eth0.2 eth1 eth1.1 vpns0'
list dns '8.8.8.8'
list dns '8.8.4.4'
config switch
option name 'switch0'
option reset '1'
config switch_vlan
option device 'switch0'
option vlan '1'
option vid '1'
option ports '0t 1 2 3 4 5'
config switch_vlan
option device 'switch0'
option vlan '2'
option vid '2'
option ports '6t'
package wireless
config wifi-device 'radio0'
option type 'mac80211'
option channel '36'
option hwmode '11a'
option path 'pci0000:00/0000:00:00.0'
option htmode 'VHT80'
config wifi-iface 'default_radio0'
option device 'radio0'
option network 'lan'
option mode 'ap'
option key ''
option encryption 'psk2+ccmp'
option ssid 'AupaPUCELA_TPL_5G'
config wifi-device 'radio1'
option type 'mac80211'
option channel '11'
option hwmode '11g'
option path 'platform/ahb/18100000.wmac'
option htmode 'HT20'
config wifi-iface 'default_radio1'
option device 'radio1'
option network 'lan'
option mode 'ap'
option key ''
option ssid 'AupaPUCELA_TPL'
option encryption 'psk2+ccmp'
package dhcp
config dnsmasq
option domainneeded '1'
option boguspriv '1'
option filterwin2k '0'
option localise_queries '1'
option rebind_protection '1'
option rebind_localhost '1'
option local '/lan/'
option domain 'lan'
option expandhosts '1'
option nonegcache '0'
option authoritative '1'
option readethers '1'
option leasefile '/tmp/dhcp.leases'
option resolvfile '/tmp/resolv.conf.auto'
option nonwildcard '1'
option localservice '1'
config dhcp 'lan'
option interface 'lan'
option ignore '1'
config dhcp 'wan'
option interface 'wan'
option ignore '1'
config odhcpd 'odhcpd'
option maindhcp '0'
option leasefile '/tmp/hosts/odhcpd'
option leasetrigger '/usr/sbin/odhcpd-update'
option loglevel '4'
package firewall
config defaults
option syn_flood '1'
option input 'ACCEPT'
option output 'ACCEPT'
option forward 'REJECT'
config zone
option name 'lan'
option input 'ACCEPT'
option output 'ACCEPT'
option forward 'ACCEPT'
list network 'lan'
config zone
option name 'wan'
option input 'REJECT'
option output 'ACCEPT'
option forward 'REJECT'
option masq '1'
option mtu_fix '1'
config forwarding
option src 'lan'
option dest 'wan'
config rule
option name 'Allow-DHCP-Renew'
option src 'wan'
option proto 'udp'
option dest_port '68'
option target 'ACCEPT'
option family 'ipv4'
config rule
option name 'Allow-Ping'
option src 'wan'
option proto 'icmp'
option icmp_type 'echo-request'
option family 'ipv4'
option target 'ACCEPT'
config rule
option name 'Allow-IGMP'
option src 'wan'
option proto 'igmp'
option family 'ipv4'
option target 'ACCEPT'
config rule
option name 'Allow-DHCPv6'
option src 'wan'
option proto 'udp'
option src_ip 'fc00::/6'
option dest_ip 'fc00::/6'
option dest_port '546'
option family 'ipv6'
option target 'ACCEPT'
config rule
option name 'Allow-MLD'
option src 'wan'
option proto 'icmp'
option src_ip 'fe80::/10'
list icmp_type '130/0'
list icmp_type '131/0'
list icmp_type '132/0'
list icmp_type '143/0'
option family 'ipv6'
option target 'ACCEPT'
config rule
option name 'Allow-ICMPv6-Input'
option src 'wan'
option proto 'icmp'
list icmp_type 'echo-request'
list icmp_type 'echo-reply'
list icmp_type 'destination-unreachable'
list icmp_type 'packet-too-big'
list icmp_type 'time-exceeded'
list icmp_type 'bad-header'
list icmp_type 'unknown-header-type'
list icmp_type 'router-solicitation'
list icmp_type 'neighbour-solicitation'
list icmp_type 'router-advertisement'
list icmp_type 'neighbour-advertisement'
option limit '1000/sec'
option family 'ipv6'
option target 'ACCEPT'
config rule
option name 'Allow-ICMPv6-Forward'
option src 'wan'
option dest '*'
option proto 'icmp'
list icmp_type 'echo-request'
list icmp_type 'echo-reply'
list icmp_type 'destination-unreachable'
list icmp_type 'packet-too-big'
list icmp_type 'time-exceeded'
list icmp_type 'bad-header'
list icmp_type 'unknown-header-type'
option limit '1000/sec'
option family 'ipv6'
option target 'ACCEPT'
config rule
option name 'Allow-IPSec-ESP'
option src 'wan'
option dest 'lan'
option proto 'esp'
option target 'ACCEPT'
config rule
option name 'Allow-ISAKMP'
option src 'wan'
option dest 'lan'
option dest_port '500'
option proto 'udp'
option target 'ACCEPT'
config include
option path '/etc/firewall.user'
# This file is interpreted as shell script.
# Put your custom iptables rules here, they will
# be executed with each firewall (re-)start.
# Internal uci firewall chains are flushed and recreated on reload, so
# put custom rules into the root chains e.g. INPUT or FORWARD or into the
# special user chains, e.g. input_wan_rule or postrouting_lan_rule.
# Generated by iptables-save v1.8.3 on Mon Aug 23 10:30:47 2021
*nat
:PREROUTING ACCEPT [169506119:214330533102]
:INPUT ACCEPT [958:132176]
:OUTPUT ACCEPT [1471:111570]
:POSTROUTING ACCEPT [1513:113250]
:postrouting_lan_rule - [0:0]
:postrouting_rule - [0:0]
:postrouting_wan_rule - [0:0]
:prerouting_lan_rule - [0:0]
:prerouting_rule - [0:0]
:prerouting_wan_rule - [0:0]
:zone_lan_postrouting - [0:0]
:zone_lan_prerouting - [0:0]
:zone_wan_postrouting - [0:0]
:zone_wan_prerouting - [0:0]
[169506119:214330533102] -A PREROUTING -m comment --comment "!fw3: Custom prerouting rule chain" -j prerouting_rule
[169502393:214330274541] -A PREROUTING -i br-lan -m comment --comment "!fw3" -j zone_lan_prerouting
[1513:113250] -A POSTROUTING -m comment --comment "!fw3: Custom postrouting rule chain" -j postrouting_rule
[1169:84912] -A POSTROUTING -o br-lan -m comment --comment "!fw3" -j zone_lan_postrouting
[1169:84912] -A zone_lan_postrouting -m comment --comment "!fw3: Custom lan postrouting rule chain" -j postrouting_lan_rule
[169502393:214330274541] -A zone_lan_prerouting -m comment --comment "!fw3: Custom lan prerouting rule chain" -j prerouting_lan_rule
[0:0] -A zone_wan_postrouting -m comment --comment "!fw3: Custom wan postrouting rule chain" -j postrouting_wan_rule
[0:0] -A zone_wan_postrouting -m comment --comment "!fw3" -j MASQUERADE
[0:0] -A zone_wan_prerouting -m comment --comment "!fw3: Custom wan prerouting rule chain" -j prerouting_wan_rule
COMMIT
# Completed on Mon Aug 23 10:30:47 2021
# Generated by iptables-save v1.8.3 on Mon Aug 23 10:30:47 2021
*mangle
:PREROUTING ACCEPT [169615701:214342869967]
:INPUT ACCEPT [108579:12359576]
:FORWARD ACCEPT [3712:259077]
:OUTPUT ACCEPT [76344:65205315]
:POSTROUTING ACCEPT [76358:65207922]
COMMIT
# Completed on Mon Aug 23 10:30:47 2021
# Generated by iptables-save v1.8.3 on Mon Aug 23 10:30:47 2021
*filter
:INPUT ACCEPT [26:1520]
:FORWARD DROP [0:0]
:OUTPUT ACCEPT [0:0]
:forwarding_lan_rule - [0:0]
:forwarding_rule - [0:0]
:forwarding_wan_rule - [0:0]
:input_lan_rule - [0:0]
:input_rule - [0:0]
:input_wan_rule - [0:0]
:output_lan_rule - [0:0]
:output_rule - [0:0]
:output_wan_rule - [0:0]
:reject - [0:0]
:syn_flood - [0:0]
:zone_lan_dest_ACCEPT - [0:0]
:zone_lan_forward - [0:0]
:zone_lan_input - [0:0]
:zone_lan_output - [0:0]
:zone_lan_src_ACCEPT - [0:0]
:zone_wan_dest_ACCEPT - [0:0]
:zone_wan_dest_REJECT - [0:0]
:zone_wan_forward - [0:0]
:zone_wan_input - [0:0]
:zone_wan_output - [0:0]
:zone_wan_src_REJECT - [0:0]
[4693:435290] -A INPUT -i lo -m comment --comment "!fw3" -j ACCEPT
[100830:11550466] -A INPUT -m comment --comment "!fw3: Custom input rule chain" -j input_rule
[47159:9317470] -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -m comment --comment "!fw3" -j ACCEPT
[421:22400] -A INPUT -p tcp -m tcp --tcp-flags FIN,SYN,RST,ACK SYN -m comment --comment "!fw3" -j syn_flood
[53647:2231556] -A INPUT -i br-lan -m comment --comment "!fw3" -j zone_lan_input
[3688:255773] -A FORWARD -m comment --comment "!fw3: Custom forwarding rule chain" -j forwarding_rule
[0:0] -A FORWARD -m conntrack --ctstate RELATED,ESTABLISHED -m comment --comment "!fw3" -j ACCEPT
[0:0] -A FORWARD -i br-lan -m comment --comment "!fw3" -j zone_lan_forward
[3688:255773] -A FORWARD -m comment --comment "!fw3" -j reject
[4693:435290] -A OUTPUT -o lo -m comment --comment "!fw3" -j ACCEPT
[67994:62769198] -A OUTPUT -m comment --comment "!fw3: Custom output rule chain" -j output_rule
[66461:62659749] -A OUTPUT -m conntrack --ctstate RELATED,ESTABLISHED -m comment --comment "!fw3" -j ACCEPT
[1533:109449] -A OUTPUT -o br-lan -m comment --comment "!fw3" -j zone_lan_output
[42:2520] -A reject -p tcp -m comment --comment "!fw3" -j REJECT --reject-with tcp-reset
[3646:253253] -A reject -m comment --comment "!fw3" -j REJECT --reject-with icmp-port-unreachable
[421:22400] -A syn_flood -p tcp -m tcp --tcp-flags FIN,SYN,RST,ACK SYN -m limit --limit 25/sec --limit-burst 50 -m comment --comment "!fw3" -j RETURN
[0:0] -A syn_flood -m comment --comment "!fw3" -j DROP
[1533:109449] -A zone_lan_dest_ACCEPT -o br-lan -m comment --comment "!fw3" -j ACCEPT
[0:0] -A zone_lan_forward -m comment --comment "!fw3: Custom lan forwarding rule chain" -j forwarding_lan_rule
[0:0] -A zone_lan_forward -m comment --comment "!fw3: Zone lan to wan forwarding policy" -j zone_wan_dest_ACCEPT
[0:0] -A zone_lan_forward -m conntrack --ctstate DNAT -m comment --comment "!fw3: Accept port forwards" -j ACCEPT
[0:0] -A zone_lan_forward -m comment --comment "!fw3" -j zone_lan_dest_ACCEPT
[53647:2231556] -A zone_lan_input -m comment --comment "!fw3: Custom lan input rule chain" -j input_lan_rule
[0:0] -A zone_lan_input -m conntrack --ctstate DNAT -m comment --comment "!fw3: Accept port redirections" -j ACCEPT
[53647:2231556] -A zone_lan_input -m comment --comment "!fw3" -j zone_lan_src_ACCEPT
[1533:109449] -A zone_lan_output -m comment --comment "!fw3: Custom lan output rule chain" -j output_lan_rule
[1533:109449] -A zone_lan_output -m comment --comment "!fw3" -j zone_lan_dest_ACCEPT
[53645:2231476] -A zone_lan_src_ACCEPT -i br-lan -m conntrack --ctstate NEW,UNTRACKED -m comment --comment "!fw3" -j ACCEPT
[0:0] -A zone_wan_forward -m comment --comment "!fw3: Custom wan forwarding rule chain" -j forwarding_wan_rule
[0:0] -A zone_wan_forward -p esp -m comment --comment "!fw3: Allow-IPSec-ESP" -j zone_lan_dest_ACCEPT
[0:0] -A zone_wan_forward -p udp -m udp --dport 500 -m comment --comment "!fw3: Allow-ISAKMP" -j zone_lan_dest_ACCEPT
[0:0] -A zone_wan_forward -m conntrack --ctstate DNAT -m comment --comment "!fw3: Accept port forwards" -j ACCEPT
[0:0] -A zone_wan_forward -m comment --comment "!fw3" -j zone_wan_dest_REJECT
[0:0] -A zone_wan_input -m comment --comment "!fw3: Custom wan input rule chain" -j input_wan_rule
[0:0] -A zone_wan_input -p udp -m udp --dport 68 -m comment --comment "!fw3: Allow-DHCP-Renew" -j ACCEPT
[0:0] -A zone_wan_input -p icmp -m icmp --icmp-type 8 -m comment --comment "!fw3: Allow-Ping" -j ACCEPT
[0:0] -A zone_wan_input -p igmp -m comment --comment "!fw3: Allow-IGMP" -j ACCEPT
[0:0] -A zone_wan_input -m conntrack --ctstate DNAT -m comment --comment "!fw3: Accept port redirections" -j ACCEPT
[0:0] -A zone_wan_input -m comment --comment "!fw3" -j zone_wan_src_REJECT
[0:0] -A zone_wan_output -m comment --comment "!fw3: Custom wan output rule chain" -j output_wan_rule
[0:0] -A zone_wan_output -m comment --comment "!fw3" -j zone_wan_dest_ACCEPT
COMMIT
# Completed on Mon Aug 23 10:30:47 2021
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1000
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
51: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP qlen 1000
inet 192.168.1.7/24 brd 192.168.1.255 scope global br-lan
valid_lft forever preferred_lft forever
default via 192.168.1.1 dev br-lan
192.168.1.0/24 dev br-lan scope link src 192.168.1.7
broadcast 127.0.0.0 dev lo table local scope link src 127.0.0.1
local 127.0.0.0/8 dev lo table local scope host src 127.0.0.1
local 127.0.0.1 dev lo table local scope host src 127.0.0.1
broadcast 127.255.255.255 dev lo table local scope link src 127.0.0.1
broadcast 192.168.1.0 dev br-lan table local scope link src 192.168.1.7
local 192.168.1.7 dev br-lan table local scope host src 192.168.1.7
broadcast 192.168.1.255 dev br-lan table local scope link src 192.168.1.7
0: from all lookup local
32766: from all lookup main
32767: from all lookup default
I hope you can help me. Thanks.
Juan.
