VLANs on WRT3200ACM

[zekica]

This might help:

Wtf is "Ethernet switch: eth0"?

In the non-DSA setup, you have a utility to configure the switch - swconfig, and you also have physical ethernet interfaces on the SoC. On devices with switches that support DSA, you don't have swconfig but instead see additional network interfaces created by the kernel, in most cases defined in the .dts (Open Firmware Device Tree Source) files. In non-DSA setup, in the standard setup, you commonly have routers with one network interface connected to WAN (let's say eth1) and another connected t…