VLANs on OpenWrt devices + Negear GS108Ev2

Hi, I know this threat is old, but could you describe how you setup the Negear GS108Ev2 for VLAN usage?
I cant get the Switch to work with Openwrt enabled devices.

I have moved your post into a new thread since the previous one was so old that it would likely be irrelevant now.

The Netgear switch may be a bit out of scope for discussion here, but given that you're trying to setup VLANs on OpenWrt devices with the GS108Ev2 connected, we can try to get you up and running.

Please state your specific issues and goals. A system topology diagram can be really useful, as will the config of your OpenWrt device(s):

Please connect to your OpenWrt device using ssh and copy the output of the following commands and post it here using the "Preformatted text </> " button:
grafik
Remember to redact passwords, MAC addresses and any public IP addresses you may have:

ubus call system board
cat /etc/config/network
cat /etc/config/wireless
cat /etc/config/dhcp
cat /etc/config/firewall