VDSL-SuperVectoring and TD-W8970B

Hardware Questions and Recommendations
23

But @FreierRadikaler didn't ask for Super Vectoring support.

I own a o2 Box 6341 which does not support Super Vectoring but normal Vectoring. The DSLAM in my neighborhood is capable of doing SV AFAIK. (Telekom provides speeds up to 250 Mbit here)

Can print my output later on.

25

He said that his provider switched to Super Vectoring Boards, and he is not able using normal vectoring.

ATU-C Vendor ID:                          Broadcom 177.238
ATU-C System Vendor ID:                   Broadcom
Chipset:                                  Lantiq-VRX200
Firmware Version:                         5.9.1.4.0.7
API Version:                              4.17.18.6
XTSE Capabilities:                        0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x2
Annex:                                    B
Line Mode:                                G.993.5 (VDSL2 with down- and upstream vectoring)
Profile:                                  17a

As you can see I'm connected with Line Mode G.993.5 and Profile 17a.

28

i was wondering:

if the DSLAM is super-vector capable but customer only has a plan serverable with profile 17a, is there any benefit of using a cpe that has support for profile 30a?

update:
bought a fb7520 - tested - no difference in dsl-sync