Using Openwrt 24.10 on Raspberry Pi 4 giving wifi VPN to all clients

Installing and Using OpenWrt
1

Hi,
I installed Openwrt 24.10 on my RPI4 and I would like to use it as a wifi router by connecting it to the ethernet port of my ISP modem that has internet access.

In addition, once the wifi network is created on the raspberry, all the clients that connect must go to the internet only through the VPN that I will create thanks to a free VPN provider (I'll use OpenVpn for Luci).

Can someone help me configure Openwrt so that it does all this? Or can you post a similar config in order to recreate it?

Thank you in advance

2

WiFi on the Pi is really weak. You will likely have a poor experience with it. Recommend against it.

3

Thanks for the advice but all clients will have a maximum distance of 5mt. Maybe in the future I can consider adding an external antenna.

Can anyone help me with the configuration described in the first post?

4

Even at a distance of 0.5m, wireless performance will still be bad (combined with a number of additional limitations, ranging from interface combinations over number limited of connecting clients and many other issues), worse than a 15 year old bottom of the barrel router.

1 Like