Using 5/10 Mhz channels with IPQ-4019 with ath10k

[urielka]

Thanks to @BrainSlayer help I managed to get this working and have assembled all the information as a guide here:

5/10 Mhz ath10k guide

Hi all, After my discussion on Using 5/10 Mhz channels with IPQ-4019 with ath10k I managed to get ath10k working with 5/10 Mhz and seems there are a lot of details and there is no place where it is organized so I figured I would write a guide and summarize it in one place so in the future people don't need to gather all this information along with misinformation. Introduction Lower than 20Mhz is supported by ath10k based devices with appropriate FW, there are 3 main variants of the ath10k FW…