Hi, I'd like to use my router as wifi extender (wifi enterprise)
I've successfully installed openwrt for my device, I'm stuck in config this for:
TP-Link TL-MR3220 v1
Firmware Version: LEDE Reboot 17.01.5 r3919-38e704be71 / LuCI lede-17.01 branch (git-18.180.55366-b78664c)
Kernel Version 4.4.140
When I go in wireless config, under interface config->encription
there is no WPA2-PSK PEAP or something like that
I'm using client html to config the router
can you help me step by step?
This is a 4/32 router meaning there is very limited flash space. A custom image will be needed to get the full wpad that supports Enterprise authentication. For a beginner it would be best to use more capable hardware.
Also LEDE 17 an old obsolete version and should no longer be used.
I have installed that versione because in the bottom of the page:
https://openwrt.org/toh/tp-link/tl-mr3220 I have seen that version.
I have this hardware at home, if I fail to achieve the result I'll buy another hardware.
However, I have read https://openwrt.org/docs/guide-user/additional-software/beginners-build-guide...
but what package should I install to achieve the result?
I have seen that I must install linux, then imagebuilder, now, what are the minimal image to achieve the result?
too many option to choose for my knowledge