Dear,
I have netgear r6220 with 19.07.8, now when I try upgrade to 21.02 appair this message:
Now, my problems if is it safe upgrade and without lost my configuration or I lost my configuration?
Regards
Dear,
I have netgear r6220 with 19.07.8, now when I try upgrade to 21.02 appair this message:
Now, my problems if is it safe upgrade and without lost my configuration or I lost my configuration?
Regards
You should read what's in the yellow box, the most important part is the 'Reason: ...' part.
Hi.
This message and behavior are normal, and as @Borromini said, read the yellow box.
Yes you can upgrade safely to 21.02 (I have 3 devices running it). Once done, go to Network, interfaces, and Luci will "translate" your network config from swconfig syntax to DSA syntax. Reboot and you're good.
Hi Guys,
I upgraded to 21.02 but some problems and only solutions, for me, was reset and reconfigure.
Now all works very well with ver. 21.02.
I have again one problem:
root@OpenWrt:~# df -h
Filesystem Size Used Available Use% Mounted on
/dev/root 3.3M 3.3M 0 100% /rom
tmpfs 59.7M 1.1M 58.7M 2% /tmp
/dev/ubi0_1 17.6M 672.0K 16.0M 4% /overlay
overlayfs:/overlay 17.6M 672.0K 16.0M 4% /
tmpfs 512.0K 0 512.0K 0% /dev
I can't use all spae in my router, ver 21.02 can't solve old problem.
Hi.
I didn't write it, but starting from scratch was also a good option. You know that you start from clean, so you won't have any issue later while upgrading to future RCs or final.
What's wrong with the memory space ?