Continuing the discussion from OpenWrt 25.12.0-rc5 - Release Candidate:
I upgraded to 25.12.0 but still no wlan working
ci-hcd.0.auto: xHCI Host Controller
[ 0.987016] PCI: bus1: Fast back to back transfers disabled
[ 0.992497] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 0.998314] pci_bus 0000:01: bus scan returning with max=01
[ 1.004032] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 1.005538] hub 1-0:1.0: USB hub found
[ 1.011428] pci 0000:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[ 1.019027] hub 1-0:1.0: 1 port detected
[ 1.026784] pci_bus 0000:00: bus scan returning with max=ff
[ 1.035236] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.042706] pci 0000:00:00.0: bridge window [mem 0x08000000-0x082fffff]: assigned
[ 1.049692] qcom-pcie 1b900000.pcie: PCI host bridge to bus 0002:00
[ 1.057776] pci 0000:01:00.0: BAR 0 [mem 0x08000000-0x081fffff 64bit]: assigned
[ 1.065828] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 1.065852] pci_bus 0002:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff])
[ 1.074060] pci 0000:01:00.0: ROM [mem 0x08200000-0x0820ffff pref]: assigned
[ 1.079467] pci_bus 0002:00: root bus resource [mem 0x32000000-0x35dfffff]
[ 1.086321] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 1.094622] pci_bus 0002:00: scanning bus
[ 1.094776] pci 0002:00:00.0: [17cb:0101] type 01 class 0x060400 PCIe Root Port
[ 1.102656] pci 0000:00:00.0: bridge window [mem 0x08000000-0x082fffff]
[ 1.108427] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
[ 1.114112] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 1.120448] pci 0002:00:00.0: bridge window [io 0x10000-0x10fff]
[ 1.126884] pci_bus 0000:00: resource 5 [mem 0x08000000-0x0fdfffff]
[ 1.132075] pci 0002:00:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 1.140674] pci_bus 0000:01: resource 1 [mem 0x08000000-0x082fffff]
[ 1.145534] pci 0002:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 1.165029] hub 2-0:1.0: USB hub found
[ 1.165147] hub 2-0:1.0: 1 port detected
[ 1.175196] pci 0002:00:00.0: supports D1
[ 1.183663] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1.189797] pci 0002:00:00.0: PME# supported from D0 D1 D3hot
[ 1.196991] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 1.204390] pci 0002:00:00.0: PME# disabled
[ 1.211872] xhci-hcd xhci-hcd.1.auto: hcc params 0x0228f065 hci version 0x100 quirks 0x0000808002000010
[ 1.221742] pci_bus 0002:00: fixups for bus
[ 1.223626] xhci-hcd xhci-hcd.1.auto: irq 38, io mem 0x11000000
[ 1.229763] PCI: bus0: Fast back to back transfers disabled
[ 1.236903] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 1.241535] pci 0002:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[ 1.248162] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 1.254352] pci_bus 0002:01: scanning bus
[ 1.261687] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 1.268992] pci 0002:01:00.0: [168c:003c] type 00 class 0x028000 PCIe Endpoint
[ 1.276036] hub 3-0:1.0: USB hub found
[ 1.282346] pci 0002:01:00.0: BAR 0 [mem 0x00000000-0x001fffff 64bit]
[ 1.290501] hub 3-0:1.0: 1 port detected
[ 1.296280] pci 0002:01:00.0: ROM [mem 0x00000000-0x0000ffff pref]
[ 1.303966] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.311518] pci 0002:01:00.0: supports D1
[ 1.318660] hub 4-0:1.0: USB hub found
[ 1.324874] pci 0002:01:00.0: PME# supported from D0 D1 D3hot
[ 1.324931] pci 0002:01:00.0: PME# disabled
[ 1.332036] hub 4-0:1.0: 1 port detected
[ 1.338126] pci_bus 0002:01: fixups for bus
[ 1.344548] usbcore: registered new interface driver usb-storage
[ 1.349592] PCI: bus1: Fast back to back transfers disabled
[ 1.358588] i2c_dev: i2c /dev entries driver
[ 1.364692] pci_bus 0002:01: bus scan returning with max=01
[ 1.364715] pci 0002:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[ 1.364739] pci_bus 0002:00: bus scan returning with max=ff
[ 1.849746] pci 0002:00:00.0: bridge window [mem 0x32000000-0x322fffff]: assigned
[ 1.850196] qcom-pcie 1b700000.pcie: PCI host bridge to bus 0001:00
[ 1.854307] pci 0002:01:00.0: BAR 0 [mem 0x32000000-0x321fffff 64bit]: assigned
[ 1.854459] pci 0002:01:00.0: ROM [mem 0x32200000-0x3220ffff pref]: assigned
[ 1.861602] pci_bus 0001:00: root bus resource [bus 00-ff]
[ 1.867721] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
[ 1.867747] pci 0002:00:00.0: bridge window [mem 0x32000000-0x322fffff]
[ 1.875061] pci_bus 0001:00: root bus resource [io 0x20000-0x2ffff] (bus address [0x0000-0xffff])
[ 1.882251] pci_bus 0002:00: resource 4 [io 0x10000-0x1ffff]
[ 1.887634] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
[ 1.892659] pci_bus 0002:00: resource 5 [mem 0x32000000-0x35dfffff]
[ 1.899682] pci_bus 0001:00: scanning bus
[ 1.908519] pci_bus 0002:01: resource 1 [mem 0x32000000-0x322fffff]
[ 1.927497] pci 0001:00:00.0: [17cb:0101] type 01 class 0x060400 PCIe Root Port
[ 1.933622] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 1.940769] pci 0001:00:00.0: bridge window [io 0x20000-0x20fff]
[ 1.946050] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff]
[ 1.950683] lp5523x 1-0032: lp5523 Programmable led chip found
[ 1.952229] pci 0001:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref]
[ 1.965121] pci 0001:00:00.0: supports D1
[ 1.972784] pci 0001:00:00.0: PME# supported from D0 D1 D3hot
[ 1.976798] pci 0001:00:00.0: PME# disabled
[ 1.984342] pci_bus 0001:00: fixups for bus
[ 1.984385] PCI: bus0: Fast back to back transfers disabled
[ 1.984447] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 0
[ 1.984774] pci_bus 0001:01: scanning bus
[ 1.985259] pci 0001:01:00.0: [168c:003c] type 00 class 0x028000 PCIe Endpoint
[ 1.989080] pci 0001:01:00.0: BAR 0 [mem 0x00000000-0x001fffff 64bit]
[ 1.996684] pci 0001:01:00.0: ROM [mem 0x00000000-0x0000ffff pref]
[ 2.003742] pci 0001:01:00.0: supports D1
[ 2.008666] pci 0001:01:00.0: PME# supported from D0 D1 D3hot
[ 2.012790] pci 0001:01:00.0: PME# disabled
[ 2.014156] pci_bus 0001:01: fixups for bus
[ 2.014266] PCI: bus1: Fast back to back transfers disabled
[ 2.018479] pci_bus 0001:01: bus scan returning with max=01
[ 2.018517] pci 0001:00:00.0: scanning [bus 01-ff] behind bridge, pass 1
[ 2.018557] pci_bus 0001:00: bus scan returning with max=ff
[ 2.018635] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e2fffff]: assigned
[ 2.023974] pci 0001:01:00.0: BAR 0 [mem 0x2e000000-0x2e1fffff 64bit]: assigned
[ 2.024160] pci 0000:00:00.0: save config 0x00: 0x010117cb
[ 2.031520] pci 0000:00:00.0: save config 0x04: 0x00100147
[ 2.031556] pci 0000:00:00.0: save config 0x08: 0xff000000
[ 2.031594] pci 0000:00:00.0: save config 0x0c: 0x00010010
[ 2.031614] pci 0000:00:00.0: save config 0x10: 0x00000000
[ 2.031633] pci 0000:00:00.0: save config 0x14: 0x00000000
[ 2.031640] pci 0001:01:00.0: ROM [mem 0x2e200000-0x2e20ffff pref]: assigned
[ 2.031652] pci 0000:00:00.0: save config 0x18: 0x00ff0100
[ 2.031677] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
[ 2.038725] pci 0000:00:00.0: save config 0x1c: 0x000000f0
[ 2.045985] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e2fffff]
[ 2.045993] pci 0000:00:00.0: save config 0x20: 0x08200800
[ 2.046013] pci 0000:00:00.0: save config 0x24: 0x0001fff1
[ 2.050859] pci 0000:00:00.0: save config 0x28: 0x00000000
[ 2.050871] pci_bus 0001:00: resource 4 [io 0x20000-0x2ffff]
[ 2.050879] pci 0000:00:00.0: save config 0x2c: 0x00000000
[ 2.050900] pci_bus 0001:00: resource 5 [mem 0x2e000000-0x31dfffff]
[ 2.057876] pci 0000:00:00.0: save config 0x30: 0x00000000
[ 2.057896] pci 0000:00:00.0: save config 0x34: 0x00000040
[ 2.063600] pci 0000:00:00.0: save config 0x38: 0x00000000
[ 2.063597] pci_bus 0001:01: resource 1 [mem 0x2e000000-0x2e2fffff]
[ 2.063621] pci 0000:00:00.0: save config 0x3c: 0x000301ff
[ 2.063931] pcieport 0000:00:00.0: assign IRQ: got 41
[ 2.069776] qcom-pcie 1b500000.pcie: msi#0 address_hi 0x0 address_lo 0x4312f000
[ 2.070532] pcieport 0000:00:00.0: AER: enabled with IRQ 42
[ 2.076085] pcieport 0000:00:00.0: save config 0x00: 0x010117cb
[ 2.076112] pcieport 0000:00:00.0: save config 0x04: 0x00100547
[ 2.076132] pcieport 0000:00:00.0: save config 0x08: 0xff000000
[ 2.076151] pcieport 0000:00:00.0: save config 0x0c: 0x00010010
[ 2.076169] pcieport 0000:00:00.0: save config 0x10: 0x00000000
[ 2.076188] pcieport 0000:00:00.0: save config 0x14: 0x00000000
[ 2.076208] pcieport 0000:00:00.0: save config 0x18: 0x00ff0100
[ 2.076229] pcieport 0000:00:00.0: save config 0x1c: 0x000000f0
[ 2.076248] pcieport 0000:00:00.0: save config 0x20: 0x08200800
[ 2.076268] pcieport 0000:00:00.0: save config 0x24: 0x0001fff1
[ 2.076288] pcieport 0000:00:00.0: save config 0x28: 0x00000000
[ 2.076307] pcieport 0000:00:00.0: save config 0x2c: 0x00000000
[ 2.076327] pcieport 0000:00:00.0: save config 0x30: 0x00000000
[ 2.076348] pcieport 0000:00:00.0: save config 0x34: 0x00000040
[ 2.076367] pcieport 0000:00:00.0: save config 0x38: 0x00000000
[ 2.076386] pcieport 0000:00:00.0: save config 0x3c: 0x00030129
[ 2.076920] pci 0000:01:00.0: save config 0x00: 0x003c168c
[ 2.076968] pci 0000:01:00.0: save config 0x04: 0x00100140
[ 2.077005] pci 0000:01:00.0: save config 0x08: 0x02800000
[ 2.077043] pci 0000:01:00.0: save config 0x0c: 0x00000010
[ 2.077081] pci 0000:01:00.0: save config 0x10: 0x08000004
[ 2.077118] pci 0000:01:00.0: save config 0x14: 0x00000000
[ 2.077155] pci 0000:01:00.0: save config 0x18: 0x00000000
[ 2.077193] pci 0000:01:00.0: save config 0x1c: 0x00000000
[ 2.077230] pci 0000:01:00.0: save config 0x20: 0x00000000
[ 2.077267] pci 0000:01:00.0: save config 0x24: 0x00000000
[ 2.077304] pci 0000:01:00.0: save config 0x28: 0x00000000
[ 2.077341] pci 0000:01:00.0: save config 0x2c: 0x00000000
[ 2.077377] pci 0000:01:00.0: save config 0x30: 0x00000000
[ 2.077414] pci 0000:01:00.0: save config 0x34: 0x00000040
[ 2.077451] pci 0000:01:00.0: save config 0x38: 0x00000000
[ 2.077488] pci 0000:01:00.0: save config 0x3c: 0x000001ff
[ 2.078842] pci 0002:00:00.0: save config 0x00: 0x010117cb
[ 2.078871] pci 0002:00:00.0: save config 0x04: 0x00100147
[ 2.078891] pci 0002:00:00.0: save config 0x08: 0xff000000
[ 2.078910] pci 0002:00:00.0: save config 0x0c: 0x00010010
[ 2.078930] pci 0002:00:00.0: save config 0x10: 0x00000000
[ 2.078949] pci 0002:00:00.0: save config 0x14: 0x00000000
[ 2.078968] pci 0002:00:00.0: save config 0x18: 0x00ff0100
[ 2.078987] pci 0002:00:00.0: save config 0x1c: 0x000000f0
[ 2.079036] pci 0002:00:00.0: save config 0x20: 0x32203200
[ 2.079059] pci 0002:00:00.0: save config 0x24: 0x0001fff1
[ 2.079080] pci 0002:00:00.0: save config 0x28: 0x00000000
[ 2.079099] pci 0002:00:00.0: save config 0x2c: 0x00000000
[ 2.079119] pci 0002:00:00.0: save config 0x30: 0x00000000
[ 2.079140] pci 0002:00:00.0: save config 0x34: 0x00000040
[ 2.079159] pci 0002:00:00.0: save config 0x38: 0x00000000
[ 2.079178] pci 0002:00:00.0: save config 0x3c: 0x000301ff
[ 2.079476] pcieport 0002:00:00.0: assign IRQ: got 43
[ 2.079645] qcom-pcie 1b900000.pcie: msi#0 address_hi 0x0 address_lo 0x43132000
[ 2.080435] pcieport 0002:00:00.0: AER: enabled with IRQ 44
[ 2.081513] pcieport 0002:00:00.0: save config 0x00: 0x010117cb
[ 2.081539] pcieport 0002:00:00.0: save config 0x04: 0x00100547
[ 2.081559] pcieport 0002:00:00.0: save config 0x08: 0xff000000
[ 2.081577] pcieport 0002:00:00.0: save config 0x0c: 0x00010010
[ 2.081596] pcieport 0002:00:00.0: save config 0x10: 0x00000000
[ 2.081617] pcieport 0002:00:00.0: save config 0x14: 0x00000000
[ 2.081638] pcieport 0002:00:00.0: save config 0x18: 0x00ff0100
[ 2.081659] pcieport 0002:00:00.0: save config 0x1c: 0x000000f0
[ 2.081678] pcieport 0002:00:00.0: save config 0x20: 0x32203200
[ 2.081698] pcieport 0002:00:00.0: save config 0x24: 0x0001fff1
[ 2.081717] pcieport 0002:00:00.0: save config 0x28: 0x00000000
[ 2.081736] pcieport 0002:00:00.0: save config 0x2c: 0x00000000
[ 2.081756] pcieport 0002:00:00.0: save config 0x30: 0x00000000
[ 2.081775] pcieport 0002:00:00.0: save config 0x34: 0x00000040
[ 2.081796] pcieport 0002:00:00.0: save config 0x38: 0x00000000
[ 2.081816] pcieport 0002:00:00.0: save config 0x3c: 0x0003012b
[ 2.082297] pci 0002:01:00.0: save config 0x00: 0x003c168c
[ 2.082340] pci 0002:01:00.0: save config 0x04: 0x00100140
[ 2.082378] pci 0002:01:00.0: save config 0x08: 0x02800000
[ 2.082415] pci 0002:01:00.0: save config 0x0c: 0x00000010
[ 2.082453] pci 0002:01:00.0: save config 0x10: 0x32000004
[ 2.082490] pci 0002:01:00.0: save config 0x14: 0x00000000
[ 2.082527] pci 0002:01:00.0: save config 0x18: 0x00000000
[ 2.082565] pci 0002:01:00.0: save config 0x1c: 0x00000000
[ 2.082602] pci 0002:01:00.0: save config 0x20: 0x00000000
[ 2.082638] pci 0002:01:00.0: save config 0x24: 0x00000000
[ 2.082675] pci 0002:01:00.0: save config 0x28: 0x00000000
[ 2.082712] pci 0002:01:00.0: save config 0x2c: 0x00000000
[ 2.082749] pci 0002:01:00.0: save config 0x30: 0x00000000
[ 2.082786] pci 0002:01:00.0: save config 0x34: 0x00000040
[ 2.082826] pci 0002:01:00.0: save config 0x38: 0x00000000
[ 2.082863] pci 0002:01:00.0: save config 0x3c: 0x000001ff
[ 2.083817] pci 0001:00:00.0: save config 0x00: 0x010117cb
[ 2.083860] pci 0001:00:00.0: save config 0x04: 0x00100147
[ 2.083892] pci 0001:00:00.0: save config 0x08: 0xff000000
[ 2.083924] pci 0001:00:00.0: save config 0x0c: 0x00010010
[ 2.083954] pci 0001:00:00.0: save config 0x10: 0x00000000
[ 2.083984] pci 0001:00:00.0: save config 0x14: 0x00000000
[ 2.084020] pci 0001:00:00.0: save config 0x18: 0x00ff0100
[ 2.084051] pci 0001:00:00.0: save config 0x1c: 0x000000f0
[ 2.084082] pci 0001:00:00.0: save config 0x20: 0x2e202e00
[ 2.084113] pci 0001:00:00.0: save config 0x24: 0x0001fff1
[ 2.084143] pci 0001:00:00.0: save config 0x28: 0x00000000
[ 2.084175] pci 0001:00:00.0: save config 0x2c: 0x00000000
[ 2.084205] pci 0001:00:00.0: save config 0x30: 0x00000000
[ 2.084237] pci 0001:00:00.0: save config 0x34: 0x00000040
[ 2.084269] pci 0001:00:00.0: save config 0x38: 0x00000000
[ 2.084300] pci 0001:00:00.0: save config 0x3c: 0x000301ff
[ 2.084681] pcieport 0001:00:00.0: assign IRQ: got 45
[ 2.084967] qcom-pcie 1b700000.pcie: msi#0 address_hi 0x0 address_lo 0x43130000
[ 2.085798] pcieport 0001:00:00.0: AER: enabled with IRQ 46
[ 2.087109] pcieport 0001:00:00.0: save config 0x00: 0x010117cb
[ 2.087148] pcieport 0001:00:00.0: save config 0x04: 0x00100547
[ 2.087179] pcieport 0001:00:00.0: save config 0x08: 0xff000000
[ 2.087211] pcieport 0001:00:00.0: save config 0x0c: 0x00010010
[ 2.087241] pcieport 0001:00:00.0: save config 0x10: 0x00000000
[ 2.087273] pcieport 0001:00:00.0: save config 0x14: 0x00000000
[ 2.087304] pcieport 0001:00:00.0: save config 0x18: 0x00ff0100
[ 2.087336] pcieport 0001:00:00.0: save config 0x1c: 0x000000f0
[ 2.087367] pcieport 0001:00:00.0: save config 0x20: 0x2e202e00
[ 2.087397] pcieport 0001:00:00.0: save config 0x24: 0x0001fff1
[ 2.087429] pcieport 0001:00:00.0: save config 0x28: 0x00000000
[ 2.087461] pcieport 0001:00:00.0: save config 0x2c: 0x00000000
[ 2.087493] pcieport 0001:00:00.0: save config 0x30: 0x00000000
[ 2.087524] pcieport 0001:00:00.0: save config 0x34: 0x00000040
[ 2.087556] pcieport 0001:00:00.0: save config 0x38: 0x00000000
[ 2.087586] pcieport 0001:00:00.0: save config 0x3c: 0x0003012d
[ 2.088389] pci 0001:01:00.0: save config 0x00: 0x003c168c
[ 2.088449] pci 0001:01:00.0: save config 0x04: 0x00100140
[ 2.088501] pci 0001:01:00.0: save config 0x08: 0x02800000
[ 2.088552] pci 0001:01:00.0: save config 0x0c: 0x00000010
[ 2.088600] pci 0001:01:00.0: save config 0x10: 0x2e000004
[ 2.088652] pci 0001:01:00.0: save config 0x14: 0x00000000
[ 2.088700] pci 0001:01:00.0: save config 0x18: 0x00000000
[ 2.088752] pci 0001:01:00.0: save config 0x1c: 0x00000000
[ 2.088801] pci 0001:01:00.0: save config 0x20: 0x00000000
[ 2.088850] pci 0001:01:00.0: save config 0x24: 0x00000000
[ 2.088901] pci 0001:01:00.0: save config 0x28: 0x00000000
[ 2.088952] pci 0001:01:00.0: save config 0x2c: 0x00000000
[ 2.089003] pci 0001:01:00.0: save config 0x30: 0x00000000
[ 2.089052] pci 0001:01:00.0: save config 0x34: 0x00000040
[ 2.089102] pci 0001:01:00.0: save config 0x38: 0x00000000
[ 2.089152] pci 0001:01:00.0: save config 0x3c: 0x000001ff
[ 2.163490] usb 1-1: new full-speed USB device number 2 using xhci-hcd
[ 2.177413] lp5523x 1-0033: lp5523 Programmable led chip found
[ 2.188130] sdhci: Secure Digital Host Controller Interface driver
[ 2.188178] sdhci: Copyright(c) Pierre Ossman
[ 2.193215] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.200142] nvmem qfprom1: cell calib raw len 11 unaligned to nvmem word size 4
[ 2.200289] mmci-pl18x 12400000.mmc: mmc0: PL180 manf 51 rev0 at 0x12400000 irq 48,0 (pio)
[ 2.203405] nvmem qfprom1: cell calib_backup raw len 11 unaligned to nvmem word size 4
[ 2.210758] mmci-pl18x 12400000.mmc: DMA channels RX dma2chan1, TX dma2chan2
[ 2.222323] NET: Registered PF_INET6 protocol family
[ 2.236537] Segment Routing with IPv6
[ 2.238866] In-situ OAM (IOAM) with IPv6
[ 2.242455] NET: Registered PF_PACKET protocol family
[ 2.246524] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 2.251905] 8021q: 802.1Q VLAN Support v1.8
[ 2.264712] Registering SWP/SWPB emulation handler
[ 2.321486] qcom_rpm 108000.rpm: RPM firmware 3.0.16777356
[ 2.326307] mmc0: new high speed MMC card at address 0001
[ 2.327606] mmcblk0: mmc0:0001 P1XXXX 3.60 GiB
[ 2.335888] Alternate GPT is invalid, using primary GPT.
[ 2.335982] mmcblk0: p1 p2 p3
[ 2.342201] mmcblk0boot0: mmc0:0001 P1XXXX 2.00 MiB
[ 2.345278] mmcblk0boot1: mmc0:0001 P1XXXX 2.00 MiB
[ 2.349772] mmcblk0rpmb: mmc0:0001 P1XXXX 128 KiB, chardev (247:0)
[ 2.350444] s1a: Bringing 0uV into 1050000-1050000uV
[ 2.360325] s1b: Bringing 0uV into 1050000-1050000uV
[ 2.365533] s2a: Bringing 0uV into 800000-800000uV
[ 2.370349] s2b: Bringing 0uV into 800000-800000uV
[ 2.535928] qca8k gpio-0:10: configuring for fixed/rgmii link mode
[ 2.552761] qca8k gpio-0:10: configuring for fixed/sgmii link mode
[ 2.557528] qca8k gpio-0:10: Link is Up - 1Gbps/Full - flow control off
[ 2.568219] qca8k gpio-0:10: Link is Up - 1Gbps/Full - flow control off
[ 2.633501] qca8k gpio-0:10 lan1 (uninitialized): PHY [qca8k-0.0:00] driver [Qualcomm Atheros 8337 internal PHY] (irq=POLL)
[ 2.753493] qca8k gpio-0:10 wan (uninitialized): PHY [qca8k-0.0:01] driver [Qualcomm Atheros 8337 internal PHY] (irq=POLL)
[ 2.787912] ipq806x-gmac-dwmac 37000000.ethernet eth0: entered promiscuous mode
[ 2.788243] ipq806x-gmac-dwmac 37400000.ethernet eth1: entered promiscuous mode
[ 2.794173] DSA: tree 0 setup
[ 2.803605] thermal thermal_zone0: Temperature check failed (-110)
[ 2.819771] clk: Disabling unused clocks
[ 2.824072] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[ 2.824747] Freeing unused kernel image (initmem) memory: 1024K
[ 2.830321] Run /sbin/init as init process
[ 2.835972] with arguments:
[ 2.835980] /sbin/init
[ 2.835986] cros_secure
[ 2.835991] with environment:
[ 2.835998] HOME=/
[ 2.836003] TERM=linux
[ 2.836008] fstools_partname_fallback_scan=1
[ 3.034776] init: Console is alive
[ 3.034946] init: - watchdog -
[ 3.037156] init: Watchdog has previously reset the system
[ 3.655727] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.716494] gpio_button_hotplug: loading out-of-tree module taints kernel.
[ 3.720817] pstore: Using crash dump compression: deflate
[ 3.722288] printk: legacy console [ramoops-1] enabled
[ 3.729674] pstore: Registered ramoops as persistent store backend
[ 3.732772] ramoops: using 0x100000@0x7ff00000, ecc: 0
[ 3.746207] libata version 3.00 loaded.
[ 3.754584] tpm_i2c_infineon 0-0020: 1.2 TPM (device-id 0x1A)
[ 3.870309] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 3.873803] init: - preinit -
[ 3.900542] random: crng init done
[ 4.670748] ipq806x-gmac-dwmac 37000000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 4.671869] dwmac1000: Master AXI performs any burst length
[ 4.677993] ipq806x-gmac-dwmac 37000000.ethernet eth0: No Safety Features support found
[ 4.693233] ipq806x-gmac-dwmac 37000000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 4.693414] ipq806x-gmac-dwmac 37000000.ethernet eth0: registered PTP clock
[ 4.701755] ipq806x-gmac-dwmac 37000000.ethernet eth0: configuring for fixed/rgmii link mode
[ 4.710224] ipq806x-gmac-dwmac 37000000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 4.719551] qca8k gpio-0:10 lan1: configuring for phy/internal link mode
[ 7.945376] qca8k gpio-0:10 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 8.889470] mount_root: overlay filesystem in /dev/mmcblk0p3 has not been formatted yet
[ 10.529410] F2FS-fs (mmcblk0p3): Found nat_bits in checkpoint
[ 10.573628] F2FS-fs (mmcblk0p3): Mounted with checkpoint version = 6147d0b5
[ 10.574456] mount_root: overlay filesystem has not been fully initialized yet
[ 10.579802] mount_root: switching to f2fs overlay
[ 10.892036] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 10.954526] qca8k gpio-0:10 lan1: Link is Down
[ 10.964620] procd: - early -
[ 10.964750] procd: - watchdog -
[ 10.966670] procd: Watchdog has previously reset the system
[ 11.505186] procd: - watchdog -
[ 11.505276] procd: Watchdog has previously reset the system
[ 11.507349] procd: - ubus -
[ 11.670389] procd: - init -
[ 12.102723] kmodloader: loading kernel modules from /etc/modules.d/*
[ 12.159524] Loading modules backported from Linux version v6.18.7-0-g5dfbc5357
[ 12.159569] Backport generated by backports.git c8a37ce
[ 12.167456] coreboot_table firmware:coreboot: probe with driver coreboot_table failed with error -22
[ 12.180618] storm-audio soc:sound: error registering soundcard: -517
[ 12.190607] storm-audio soc:sound: error registering soundcard: -517
[ 12.310913] PPP generic driver version 2.4.2
[ 12.311621] NET: Registered PF_PPPOX protocol family
[ 12.326004] debugfs: Directory '28100000.lpass' with parent 'ipq806x-storm' already present!
[ 12.342984] ath10k_pci 0000:01:00.0: assign IRQ: got 41
[ 12.343021] ath10k 6.15 driver, optimized for CT firmware, probing pci device: 0x3c.
[ 12.354053] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 12.354160] ath10k_pci 0000:01:00.0: enabling bus mastering
[ 12.354519] qcom-pcie 1b500000.pcie: msi#1 address_hi 0x0 address_lo 0x4312f000
[ 12.354684] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 12.368131] urngd: v1.0.2 started.
[ 13.141799] ath10k_pci 0000:01:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[ 13.141851] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 13.150774] ath10k_pci 0000:01:00.0: firmware ver 10.1-ct-8x-__fW-023-23ea9f8e api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,peer-fixed-rate,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 42c82ae5
[ 13.304591] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 13.334964] ath10k_pci 0000:01:00.0: otp calibration failed: 2
[ 13.335011] ath10k_pci 0000:01:00.0: failed to run otp: -22 (download-cal-data)
[ 13.339703] ath10k_pci 0000:01:00.0: could not init core (-22)
[ 13.347030] ath10k_pci 0000:01:00.0: could not probe fw (-22)
[ 13.353031] ath10k_pci 0002:01:00.0: assign IRQ: got 43
[ 13.353061] ath10k 6.15 driver, optimized for CT firmware, probing pci device: 0x3c.
[ 13.359311] ath10k_pci 0002:01:00.0: enabling device (0140 -> 0142)
[ 13.366592] ath10k_pci 0002:01:00.0: enabling bus mastering
[ 13.366946] qcom-pcie 1b900000.pcie: msi#1 address_hi 0x0 address_lo 0x43132000
[ 13.367110] ath10k_pci 0002:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 14.070327] ath10k_pci 0002:01:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043222ff sub 0000:0000
[ 14.070381] ath10k_pci 0002:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 14.079307] ath10k_pci 0002:01:00.0: firmware ver 10.1-ct-8x-__fW-023-23ea9f8e api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,peer-fixed-rate,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 42c82ae5
[ 14.210655] ath10k_pci 0002:01:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 14.240942] ath10k_pci 0002:01:00.0: otp calibration failed: 2
[ 14.240988] ath10k_pci 0002:01:00.0: failed to run otp: -22 (download-cal-data)
[ 14.245746] ath10k_pci 0002:01:00.0: could not init core (-22)
[ 14.252942] ath10k_pci 0002:01:00.0: could not probe fw (-22)
[ 14.259074] ath10k_pci 0001:01:00.0: assign IRQ: got 45
[ 14.259106] ath10k 6.15 driver, optimized for CT firmware, probing pci device: 0x3c.
[ 14.265369] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 14.272492] ath10k_pci 0001:01:00.0: enabling bus mastering
[ 14.272841] qcom-pcie 1b700000.pcie: msi#1 address_hi 0x0 address_lo 0x43130000
[ 14.273005] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 14.971339] ath10k_pci 0001:01:00.0: qca988x hw2.0 target 0x4100016c chip_id 0x043202ff sub 0000:0000
[ 14.971399] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 14.980303] ath10k_pci 0001:01:00.0: firmware ver 10.1-ct-8x-__fW-023-23ea9f8e api 2 features wmi-10.x,has-wmi-mgmt-tx,mfp,peer-fixed-rate,txstatus-noack,wmi-10.x-CT,ratemask-CT,txrate-CT,get-temp-CT,tx-rc-CT,cust-stats-CT,retry-gt2-CT,txrate2-CT,beacon-cb-CT,wmi-block-ack-CT crc32 42c82ae5
[ 15.112273] ath10k_pci 0001:01:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08
[ 15.142519] ath10k_pci 0001:01:00.0: otp calibration failed: 2
[ 15.142563] ath10k_pci 0001:01:00.0: failed to run otp: -22 (download-cal-data)
[ 15.147354] ath10k_pci 0001:01:00.0: could not init core (-22)
[ 15.154649] ath10k_pci 0001:01:00.0: could not probe fw (-22)
[ 15.166911] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 19.802441] ipq806x-gmac-dwmac 37000000.ethernet eth0: Link is Down
[ 19.808805] ipq806x-gmac-dwmac 37000000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 19.809881] dwmac1000: Master AXI performs any burst length
[ 19.816068] ipq806x-gmac-dwmac 37000000.ethernet eth0: No Safety Features support found
[ 19.831307] ipq806x-gmac-dwmac 37000000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[ 19.831493] ipq806x-gmac-dwmac 37000000.ethernet eth0: registered PTP clock
[ 19.839287] ipq806x-gmac-dwmac 37000000.ethernet eth0: configuring for fixed/rgmii link mode
[ 19.851596] ipq806x-gmac-dwmac 37000000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[ 20.004778] ipq806x-gmac-dwmac 37400000.ethernet eth1: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 20.005896] dwmac1000: Master AXI performs any burst length
[ 20.012035] ipq806x-gmac-dwmac 37400000.ethernet eth1: No Safety Features support found
[ 20.027379] ipq806x-gmac-dwmac 37400000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
[ 20.027558] ipq806x-gmac-dwmac 37400000.ethernet eth1: registered PTP clock
[ 20.053752] ipq806x-gmac-dwmac 37400000.ethernet eth1: configuring for fixed/sgmii link mode
[ 20.054153] ipq806x-gmac-dwmac 37400000.ethernet eth1: Link is Up - 1Gbps/Full - flow control off
[ 20.063810] qca8k gpio-0:10 lan1: configuring for phy/internal link mode
[ 20.137096] br-lan: port 1(lan1) entered blocking state
[ 20.137141] br-lan: port 1(lan1) entered disabled state
[ 20.141215] qca8k gpio-0:10 lan1: entered allmulticast mode
[ 20.146445] ipq806x-gmac-dwmac 37400000.ethernet eth1: entered allmulticast mode
[ 20.181337] qca8k gpio-0:10 lan1: entered promiscuous mode
[ 20.231062] qca8k gpio-0:10 wan: configuring for phy/internal link mode
[ 23.305463] qca8k gpio-0:10 lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 23.305539] br-lan: port 1(lan1) entered blocking state
[ 23.311640] br-lan: port 1(lan1) entered forwarding state
[ 23.384266] qca8k gpio-0:10 wan: Link is Up - 1Gbps/Full - flow control rx/tx