Updated 2 devices from 18 to 21 but WPA2-Enterprise is not available

profi · September 8, 2021, 11:43am

This config (actual) is working well.

root@devolo_1200e_dachboden:~# uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.hwmode='11a'
wireless.radio0.path='pci0000:00/0000:00:00.0'
wireless.radio0.country='DE'
wireless.radio0.htmode='VHT80'
wireless.radio0.txpower='23'
wireless.radio0.cell_density='0'
wireless.radio0.channel='100'
wireless.radio1=wifi-device
wireless.radio1.type='mac80211'
wireless.radio1.hwmode='11g'
wireless.radio1.path='platform/ahb/18100000.wmac'
wireless.radio1.channel='8'
wireless.radio1.htmode='HT20'
wireless.radio1.cell_density='0'
wireless.radio1.txpower='20'
wireless.wifinet0=wifi-iface
wireless.wifinet0.device='radio0'
wireless.wifinet0.mode='ap'
wireless.wifinet0.ssid='Heidi-PSK'
wireless.wifinet0.encryption='psk2'
wireless.wifinet0.key='XXXXXXXXXXXXXXXX'
wireless.wifinet0.network='lan'
wireless.wifinet1=wifi-iface
wireless.wifinet1.device='radio1'
wireless.wifinet1.mode='ap'
wireless.wifinet1.ssid='Heidi-PSK'
wireless.wifinet1.encryption='psk2'
wireless.wifinet1.key='XXXXXXXXXXXXXXX'
wireless.wifinet1.network='lan'
root@devolo_1200e_dachboden:~#

profi · September 8, 2021, 11:44am

No opkg extras
No fance dis
No changes on ssh level .. all configs over luci done

anon50098793 · September 8, 2021, 11:45am

great... this means pretty much all your issues will come down to the apps themselves or whatever commands/luci you ran on the system after upgrade...

(don't try to remember... just saying that this seems to be the important point for your problems...)

if you ran zero commands... then yes... looks like some sort of opkg bug...

(well we can't rule out a storage bug either but given other users have reported luci->opkg oddities... and you system would likely not be functioning so well with storage issues... maybe we can...)

good... we'd need to see the one from when it's not working...

did you have it working before... (eg. 19 + EAP when upgrading)?
can you compare the old(backup?) vs new eap config/wireless files? (not right now... but something you could look at)

profi · September 8, 2021, 11:46am

OK, I will create an additions WPA2-EAP in LUCI .. wait

profi · September 8, 2021, 11:58am

Now I have a working WPA2-PSK and WPA2-EAP on my openwrt.

I deinstalled everything with wpa, but with wpa I first had to install and remove.

root@devolo_1200e_dachboden:~# opkg install wpad
Installing wpad (2020-06-08-5a8b3662-35) to root...
Downloading https://downloads.openwrt.org/releases/21.02.0/packages/mips_24kc/base/wpad_2020-06-08-5a8b3662-35_mips_24kc.ipk
Configuring wpad.

root@devolo_1200e_dachboden:~# opkg remove wpad
Removing package wpad from root...

root@devolo_1200e_dachboden:~# opkg install wpad-wolfssl
Installing wpad-wolfssl (2020-06-08-5a8b3662-35) to root...
Downloading https://downloads.openwrt.org/releases/21.02.0/packages/mips_24kc/base/wpad-wolfssl_2020-06-08-5a8b3662-35_mips_24kc.ipk
Configuring wpad-wolfssl.
root@devolo_1200e_dachboden:~#


root@devolo_1200e_dachboden:~# opkg remove wpad-wolfssl
Removing package wpad-wolfssl from root...

root@devolo_1200e_dachboden:~# opkg install wpad-openssl
Installing wpad-openssl (2020-06-08-5a8b3662-35) to root...
Downloading https://downloads.openwrt.org/releases/21.02.0/packages/mips_24kc/base/wpad-openssl_2020-06-08-5a8b3662-35_mips_24kc.ipk
Installing libopenssl1.1 (1.1.1l-1) to root...
Downloading https://downloads.openwrt.org/releases/21.02.0/packages/mips_24kc/base/libopenssl1.1_1.1.1l-1_mips_24kc.ipk
Configuring libopenssl1.1.
Configuring wpad-openssl.
root@devolo_1200e_dachboden:~#

root@devolo_1200e_dachboden:~# opkg remove wpad-openssl
Removing package wpad-openssl from root...
root@devolo_1200e_dachboden:~#

Then reboot 2 x times

Finally install wpad-wolfssl

root@devolo_1200e_dachboden:~# opkg install wpad-wolfssl
Installing wpad-wolfssl (2020-06-08-5a8b3662-35) to root...
Downloading https://downloads.openwrt.org/releases/21.02.0/packages/mips_24kc/base/wpad-wolfssl_2020-06-08-5a8b3662-35_mips_24kc.ipk
Configuring wpad-wolfssl.
root@devolo_1200e_dachboden:~#

Went in Luci to network wireless and both nodes are offline
Then configured 2 SSID with wpa2-psk and wpa2-eap

And then gotcha .. it is running
This is the output of my wireless .....

root@devolo_1200e_dachboden:~# uci show wireless
wireless.radio0=wifi-device
wireless.radio0.type='mac80211'
wireless.radio0.hwmode='11a'
wireless.radio0.path='pci0000:00/0000:00:00.0'
wireless.radio0.country='DE'
wireless.radio0.htmode='VHT80'
wireless.radio0.txpower='23'
wireless.radio0.cell_density='0'
wireless.radio0.channel='100'
wireless.radio1=wifi-device
wireless.radio1.type='mac80211'
wireless.radio1.hwmode='11g'
wireless.radio1.path='platform/ahb/18100000.wmac'
wireless.radio1.channel='8'
wireless.radio1.htmode='HT20'
wireless.radio1.cell_density='0'
wireless.radio1.txpower='20'
wireless.wifinet0=wifi-iface
wireless.wifinet0.device='radio0'
wireless.wifinet0.mode='ap'
wireless.wifinet0.ssid='Heidi-PSK'
wireless.wifinet0.encryption='psk2'
wireless.wifinet0.key='XXXXXXXXXX'
wireless.wifinet0.network='lan'
wireless.wifinet1=wifi-iface
wireless.wifinet1.device='radio1'
wireless.wifinet1.mode='ap'
wireless.wifinet1.ssid='Heidi-PSK'
wireless.wifinet1.encryption='psk2'
wireless.wifinet1.key='XXXXXXXXXX'
wireless.wifinet1.network='lan'
wireless.wifinet2=wifi-iface
wireless.wifinet2.device='radio1'
wireless.wifinet2.mode='ap'
wireless.wifinet2.ssid='Heidi-Radius'
wireless.wifinet2.encryption='wpa2'
wireless.wifinet2.auth_server='192.168.134.1'
wireless.wifinet2.auth_port='1812'
wireless.wifinet2.auth_secret='XXXXXXXXXXXXXXXX'
wireless.wifinet2.acct_server='192.168.134.1'
wireless.wifinet2.acct_port='1813'
wireless.wifinet2.acct_secret='XXXXXXXXXXXX'
wireless.wifinet2.network='lan'
wireless.wifinet3=wifi-iface
wireless.wifinet3.device='radio0'
wireless.wifinet3.mode='ap'
wireless.wifinet3.ssid='Heidi-Radius'
wireless.wifinet3.encryption='wpa2'
wireless.wifinet3.auth_server='192.168.134.1'
wireless.wifinet3.auth_port='1812'
wireless.wifinet3.auth_secret='XXXXXXXXXXXX'
wireless.wifinet3.acct_server='192.168.134.1'
wireless.wifinet3.acct_port='1813'
wireless.wifinet3.acct_secret='XXXXXXXXXX'
wireless.wifinet3.network='lan'
root@devolo_1200e_dachboden:~#

Thank you so much for your help ...

system · September 18, 2021, 12:01pm

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.