When i upload anything, the download and upload speed fully drop and ping packet fully loss. I request openwrt team to fix the problem as soon as possible.
Did you buy the premium support package ?
What's upstream of your device, and is this an AP ?
1 Like
Please post output of following commands from your device (text enclosed as code </>)
ubus call system board
cat /etc/config/network
cat /etc/config/wireless
cat /etc/config/firewall
obviously overwriting any public IPs or secret parameters in those files
Also please post results (copy/paste the links) using https://www.waveform.com/tools/bufferbloat
1/ wired to lan port of router
2/ wireless
3/ (only if easy/possible) from the PC directly connected to the internet in place of router.
First you show the problem, if it is really caused by team in question we will guide you to fill a detailed bug report.
PS btw dont post same picture over and over again. Spreading threads will not give you better answers.
@mdhimelali These are the classic symptoms of bufferbloat. The luci-app-sqm package has facilities to eliminate the added latency. The SQM How-to document (below) tells how to configure it.
For more information, see:
It is very slow SoC, might help to have flow offload on if it cannot reach line speeds.
My Device is an AP
The connection is too lagging, my router flash is only 1.74MB. How i fix the issue😴
Here is the bufferbloat test
https://www.waveform.com/tools/bufferbloat?test-id=c80ea41e-6e4d-40df-a2b4-02f22a7da0a2
![Screenshot_2025-01-28-19-46-40-74_40deb4010]
My Device ram is too low, i request openwrt team to fix it by next update
keep dreaming dude, there's nothing to fix.
get a better device.
Signal Is weak after installing the openwrt, and stablity not better
mixed encryption for the wifi is the 1st issue...
provide the info requested in Unstable Upload Speed In COMFAST CF-E314N v2 - #3 by brada4.
When i use the router stock firmware i was getting 90mbps+ speed in 40mhz, but after installing the openwrt, i am getting 50mbps locked speed in 40mhz
How can i solve the issue?
do the needful, provide the information requested.
Which information bro?
the one requested a couple posts up ?
Iam not understand dear
what part, dear ?
I mean SQM