Unspecified error on "interfaces" opening

dittohead · May 11, 2025, 8:01pm

Update today to 24.10.1 (r28597-0425664679), and got next error when click network-interfaces

RPC call to uci/get failed with ubus code 9: Unspecified error
  at ClassConstructor.handleCallReply (http://192.168.1.1/luci-static/resources/rpc.js?v=25.130.38691~48b6321-1744562312:15:3)

in suggestions topics seeing similar error, but no any explanation

psherman · May 11, 2025, 8:09pm

Let’s review your config.

Please connect to your OpenWrt device using ssh and copy the output of the following commands and post it here using the "Preformatted text </> " button:

Remember to redact passwords, MAC addresses and any public IP addresses you may have:

ubus call system board
cat /etc/config/network
cat /etc/config/wireless
cat /etc/config/dhcp
cat /etc/config/firewall

dittohead · May 11, 2025, 8:18pm

nothing changes, but:
network:

config interface 'loopback'
	option device 'lo'
	option proto 'static'
	option ipaddr '127.0.0.1'
	option netmask '255.0.0.0'

config globals 'globals'
	option packet_steering '1'
	option ula_prefix 'fd4e:1b2f:a83c::/48'

config device
	option name 'br-lan'
	option type 'bridge'
	list ports 'lan1'

config interface 'lan'
	option device 'br-lan'
	option proto 'static'
	option ipaddr '192.168.1.1'
	option netmask '255.255.255.0'
	option ip6assign '60'
	list dns '8.8.8.8'
	list dns '8.8.4.4'
	list dns '1.1.1.1'

config interface 'wan'
	option device 'wan'
	option proto 'dhcp'
	option force_link '1'
	option delegate '0'
	option metric '2'

config interface 'wan-ip6'
	option device 'wan'
	option proto 'dhcpv6'
	option reqaddress 'try'
	option reqprefix 'auto'

config interface 'xPON'
	option proto 'static'
	option device 'wan'
	option netmask '255.255.255.0'
	option ipaddr '192.168.101.2'

config rule
	option out 'lan2'
	option dest '192.168.101.2/24'
	option lookup 'default'
	option in 'lan'
	option disabled '1'

config interface 'pppoe'
	option proto 'pppoe'
	option device 'wan'
	option username '18202'
	option password 'ert18202'
	option ipv6 'auto'

wireless

config wifi-device 'wifi24'
	option type 'mac80211'
	option path '1e140000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0'
	option band '2g'
	option channel 'auto'
	option channels '1-11'
	option cell_density '0'
	option country 'PA'
	option htmode 'HT20'
	option txpower '20'

config wifi-iface 'default_radio0'
	option device 'wifi24'
	option network 'lan'
	option mode 'ap'
	option ssid 'ssid'
	option encryption 'psk2'
	option key '***'
	option ifname '24g-ap'

config wifi-device 'wifi5g'
	option type 'mac80211'
	option path '1e140000.pcie/pci0000:00/0000:00:01.0/0000:02:00.0'
	option band '5g'
	option channel 'auto'
	option cell_density '0'
	option htmode 'VHT40'
	option country 'PA'
	option txpower '14'

config wifi-iface 'default_radio1'
	option device 'wifi5g'
	option network 'lan'
	option mode 'ap'
	option ssid 'ssid_5g'
	option encryption 'psk2'
	option key '***'
	option ifname '5g-ap'

dhcp

config dnsmasq
	option localise_queries '1'
	option rebind_protection '1'
	option expandhosts '1'
	option readethers '1'
	option leasefile '/tmp/dhcp.leases'
	option ednspacket_max '1232'
	option localservice '1'
	option rebind_localhost '1'
	option authoritative '1'
	option local '/local/'
	option domain 'local'
	option strictorder '1'
	option allservers '1'

config dhcp 'lan'
	option interface 'lan'
	option start '100'
	option limit '150'
	option leasetime '12h'
	option dhcpv4 'server'
	option dhcpv6 'server'
	option ra 'server'
	list ra_flags 'managed-config'
	list ra_flags 'other-config'

config dhcp 'wan'
	option interface 'wan'
	option ignore '1'

config odhcpd 'odhcpd'
	option maindhcp '0'
	option leasefile '/tmp/hosts/odhcpd'
	option leasetrigger '/usr/sbin/odhcpd-update'
	option loglevel '4'

config host
	option name 'server'
	option dns '1'
	option mac 'FF:FF:FF:FF:FF:FF'
	option ip '192.168.1.227'

config host
	option name '0ilo'
	option dns '1'
	option mac 'FF:FF:FF:FF:FF:FF'
	option ip '192.168.1.229'

config host
	option name 'transmission'
	option dns '1'
	option mac '00:FD:45:03:AA:47'
	option ip '192.168.1.99'

config host
	option name 'plex'
	option dns '1'
	option mac '02:FD:45:14:FA:0A'
	option ip '192.168.1.117'

config host
	option name 'switch'
	option dns '1'
	option mac ''FF:FF:FF:FF:FF:FF''
	option ip '192.168.1.2'

config host
	option mac ''FF:FF:FF:FF:FF:FF''
	option ip '192.168.1.3'
	option name 'ups'

firewall

config defaults
	option input 'ACCEPT'
	option output 'ACCEPT'
	option forward 'ACCEPT'

config zone
	option name 'lan'
	option input 'ACCEPT'
	option output 'ACCEPT'
	option forward 'ACCEPT'
	option masq_allow_invalid '1'
	option masq '1'
	list network 'lan'
	list network 'lan2'
	list network 'xPON'

config zone
	option name 'wan'
	option output 'ACCEPT'
	option masq '1'
	option mtu_fix '1'
	option input 'ACCEPT'
	option forward 'ACCEPT'
	option masq_allow_invalid '1'
	list network 'soyuz'
	list network 'wan6'
	list network 'pppoe'

config forwarding
	option src 'lan'
	option dest 'wan'

config rule
	option name 'Allow-DHCP-Renew'
	option src 'wan'
	option proto 'udp'
	option dest_port '68'
	option target 'ACCEPT'
	option family 'ipv4'

config rule
	option name 'Allow-Ping'
	option src 'wan'
	option proto 'icmp'
	option icmp_type 'echo-request'
	option family 'ipv4'
	option target 'ACCEPT'

config rule
	option name 'Allow-IGMP'
	option src 'wan'
	option proto 'igmp'
	option family 'ipv4'
	option target 'ACCEPT'

config rule
	option name 'Allow-DHCPv6'
	option src 'wan'
	option proto 'udp'
	option dest_port '546'
	option family 'ipv6'
	option target 'ACCEPT'

config rule
	option name 'Allow-MLD'
	option src 'wan'
	option proto 'icmp'
	option src_ip 'fe80::/10'
	list icmp_type '130/0'
	list icmp_type '131/0'
	list icmp_type '132/0'
	list icmp_type '143/0'
	option family 'ipv6'
	option target 'ACCEPT'

config rule
	option name 'Allow-ICMPv6-Input'
	option src 'wan'
	option proto 'icmp'
	list icmp_type 'echo-request'
	list icmp_type 'echo-reply'
	list icmp_type 'destination-unreachable'
	list icmp_type 'packet-too-big'
	list icmp_type 'time-exceeded'
	list icmp_type 'bad-header'
	list icmp_type 'unknown-header-type'
	list icmp_type 'router-solicitation'
	list icmp_type 'neighbour-solicitation'
	list icmp_type 'router-advertisement'
	list icmp_type 'neighbour-advertisement'
	option limit '1000/sec'
	option family 'ipv6'
	option target 'ACCEPT'

config rule
	option name 'Allow-ICMPv6-Forward'
	option src 'wan'
	option dest '*'
	option proto 'icmp'
	list icmp_type 'echo-request'
	list icmp_type 'echo-reply'
	list icmp_type 'destination-unreachable'
	list icmp_type 'packet-too-big'
	list icmp_type 'time-exceeded'
	list icmp_type 'bad-header'
	list icmp_type 'unknown-header-type'
	option limit '1000/sec'
	option family 'ipv6'
	option target 'ACCEPT'

config rule
	option name 'Allow-IPSec-ESP'
	option src 'wan'
	option dest 'lan'
	option proto 'esp'
	option target 'ACCEPT'

config rule
	option name 'Allow-ISAKMP'
	option src 'wan'
	option dest 'lan'
	option dest_port '500'
	option proto 'udp'
	option target 'ACCEPT'

config rule
	option name 'xPON'
	option dest 'lan'
	list dest_ip '192.168.101.1'
	option target 'ACCEPT'
	list proto 'all'
	option src '*'
	option enabled '0'

P.S. same problem for network->routes

frollic · May 11, 2025, 8:21pm

Did you update any packages post upgrade ?

dittohead · May 11, 2025, 8:26pm

no, just include to build:

nano curl block-mount e2fsprogs kmod-usb-storage-uas kmod-usb3 luci-app-hd-idle kmod-fs-ext4 mc

brada4 · May 11, 2025, 8:45pm

Estas dos líneas parecen mal

dittohead · May 11, 2025, 8:47pm

here is real MACs replaced to FF

brada4 · May 11, 2025, 9:03pm

Well, reset the device and use proper country code for best results

dittohead · May 11, 2025, 9:03pm

found problem:
I was rename wan6 to wan-ip6. That is cause the issue. Rename back - all is works

dittohead · May 12, 2025, 8:57am

Reset is always easy way

system · May 22, 2025, 8:58am

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.