Hi, long story short: trying to find an alternative VPN service, except allready runing anb working WG.
Found here this service https://github.com/amirhosseinchoghaei/Passwall and installed on router ( with 33mb on board ). After many attempts to bring up Xray - shadowsoks, wg, trojan - i give up.
How do i uninstall passwall now? It doesnt have any .sh script to do that. Trying to release some storage on router..
Or maybe some help with configuring xray in this passwall..the thing is that logs are in chinese. For this scenario i have vps server with allready xray server side on it and creds.
Frequently, you can use opkg remove <package name>. Try that.... but if it doesn't work, you need to ask the author of that package for help (it didn't come from here, so we cannot support it).
well theres a lot of packages in this passwall..
If that's the case, you have the following options:
- research which additional packages were installed by passwall and use the
opkg remove commands for those (be careful not to remove things that are required by the core system and/or other packages)
- ask the package maintainer (i.e. not here)
- Reset your router to defaults and start fresh.
1 Like
For the future: it's not a good idea to execute random people's random shell scripts from random places on the internet unless you know exactly what they do. And even then it's fairly sketchy.
That installer script starts off by removing the default dnsmasq package and it really doesn't get any better after that. The installer pushes the system far enough from a baseline install that, if you managed to "uninstall" everything, you'd probably end up with a nonfunctional system. I'd have to agree with @psherman: firstboot and start fresh.
1 Like