Dear after installing the LEDE on my device
Linksys WRT1900ACS, the wifi does not work.
What is the procedure to return with Linksys default firmware, I did a lot of research regarding the uninstallation of the firmware of the equipment and without success, I would like something that really solved, I already thank you very much for the help of all.
Equipment
LINKSYS WRT1900ACS
Just in case you might want to give LEDE one last opportunity...
Unfortunately it did not work ...
I am not using the equipment for this.
hnyman
November 27, 2017, 2:02pm
6
What equipment?
Original Linksys OEM firmware can be installed from LEDE via the normal SSH console. (LuCI does not work, as image format/checksum fails.)
The image format verification has changed in LEDE, and that prevents you from installing Linksys OEM image via LuCI.
But you can use command-line sysupgrade to override the image format check and use the Linksys firmware image.
ssh into the router
cd to /tmp
download/copy the correct Linksys firmware to /tmp, and
run sysupgrade -n -F linksysfirmware.img
-F or --force
(Or you can also issue the "firstboot" command to clear all settings from the current firmware, so that after a reboot the…
Any chance that you might either read the whole thread or at least use forum search? Return to Linksys OEM has been questioned so many times...
In nutshell:
in Linksys dual-partition devices, you always flash the other partition, so that the current one stays as the fall-back option (in case the flash fails). That is done both by the Linksys OEM firmware and LEDE. If you have first used OEM to flash LEDE and then you have later flashed LEDE again from that, you now have LEDE on both partitio…