Unable to get WIFI interface to start

Hi Everyone,

This is my first post, so I hope it will be OK. I'm also new to OpenWRT and am more of a GUI person CLI. I have the following HW:
Model: TP-Link Archer C7 v5
Architecture: Qualcomm Atheros QCA956X ver 1 rev 0
Firmware Version: OpenWrt 19.07.7 r11306-c4a6851c72 / LuCI openwrt-19.07 branch git-21.238.28320-53f59d3|
Kernel Version: 4.14.221

Everything has been running fine when testing. I decided to change the WIFI SSID from the default to something new of both interfaces. After the system reloaded, the 5Ghz interface was coming back up. I tried the restart button, but nothing happens. I have updated all the software that LUCI indicated. I also added NANO since I'm not a VI person, sorry. I looked at the /etc/config/wireless file and there is nothing stating disabled. I hope the Gurus out there will be able to help me out.

Thanks.

Maybe there is an error in the configuration file and hostapd exits.

/usr/sbin/hostapd -s -P /var/run/wifi-phy1.pid -B /var/run/hostapd-phy1.conf