Unable to get opkg list update after sysupgrade (ipv6 connectivity)

Hello hnyman,

Thanks for your reply. BTW, I am using your image on the wndr3800 and have for years. :slight_smile: Thanks for that.

On the wndr3800 which has a fiber connection to the internet I see:

Active DHCP Lease: 192.168.8.180 for the WRT32X
Active DHCPv6 Leases: fdc6:bf8e:dc1c::735/128  and  fdc6:bf8e:dc1c:4::/62 both for the WRT32X.lan

On the WRX32X whose WAN interface is connected to the LAN side of the WNDR3800 I see:

Protocol: DHCP client
Uptime: 6h 3m 39s
MAC: 60:38:E0:C5:D1:70
RX: 157.63 MB (235915 Pkts.)
TX: 46.01 MB (234820 Pkts.)
IPv4: 192.168.8.180/24

and

Protocol: DHCPv6 client
Uptime: 6h 4m 30s
MAC: 60:38:E0:C5:D1:70
RX: 157.65 MB (236038 Pkts.)
TX: 46.02 MB (234944 Pkts.)
IPv6: fdc6:bf8e:dc1c::735/128
IPv6-PD: fdc6:bf8e:dc1c:4::/62

Trying a wget from the cli on the WRT32X fails with:

# wget http://downloads.openwrt.org/releases/18.06.1/targets/mvebu/cortexa9/packages/Packages.gz
Downloading 'http://downloads.openwrt.org/releases/18.06.1/targets/mvebu/cortexa9/packages/Packages.gz'
Connecting to 2a01:4f8:202:43ea::2:80
Connection error: Connection failed

To save some time, would doing a firmware factory install solve the problem or is the issue soemthing else you think, that would not be resolved that way?

I am feeling a bit out of my depth here. :frowning:

Thanks again for any help.