I tried everything, from installng from WebUI to installing DDWRT (not succesful), to installing numerous img files from LEDE, however im unable to get a working version on my WRT3200ACM. I bought this thing last week and read almost everything about this problem, however still unsuccesful. I followed 'WRT3200ACM - Unable to flash LEDE successfully', but im still unsuccesful. All flashefforts i tried were unsuccesful, even ddwrt doesnt work. The only img file that i can flash is the linksys firmware 'FW_WRT3200ACM_1.0.6.186168_prod.img'. I flashed with the webUI and with USB-TTL. The image from: https://wiki.openwrt.org/toh/linksys/wrt_ac_series#tab__firmware, LEDE branches, Reboot 17.01.4 for WRT3200ACM V1 system image does not work! Rename to rango.img, interupt boot, setenv 3x run update_both_images, flask OK, functionality ZERO.
Output putty log below. Can someone please assist.
------
NAND write: device 0 offset 0xa00000, size 0x9e0000
10354688 bytes written: OK
NAND write: device 0 offset 0x5a00000, size 0x9e0000
10354688 bytes written: OK
Marvell>>
------
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.02.07 19:10:55 =~=~=~=~=~=~=~=~=~=~=~=
done
#### auto_recovery:2 ####
auto_recovery_check changes bootcmd: run altnandboot
Hit any key to stop autoboot: 3 0
Marvell>> run nandboot
NAND read: device 0 offset 0xa00000, size 0x600000
6291456 bytes read: OK
## Booting kernel from Legacy Image at 02000000 ...
Image Name: ARM LEDE Linux-4.4.92
Created: 2017-10-17 17:46:20 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2153484 Bytes = 2.1 MiB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.4.92 (buildbot@debian8) (gcc version 5.4.0 (LEDE GCC 5.4.0 r3560-79f57e4) ) #0 SMP Tue Oct 17 17:46:20 2017
[ 0.000000] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Linksys WRT3200ACM
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] PERCPU: Embedded 12 pages/cpu @dfbcf000 s17984 r8192 d22976 u49152
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock6 ro rootdelay=1 rootfstype=jffs2 earlyprintk mtdparts=armada-nand:2048K(uboot)ro,128K(u_env),256K(s_env),256K@8064K(devinfo),1920K@8320K(sysdiag),80m@10m(kernel),74m@16m(rootfs),80m@90m(alt_kernel),74m@96m(alt_rootfs),160m@10m(ubifs),-@170m(syscfg)
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 513348K/524288K available (4752K kernel code, 189K rwdata, 696K rodata, 268K init, 302K bss, 10940K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc055a4b4 (5450 kB)
[ 0.000000] .init : 0xc055b000 - 0xc059e000 ( 268 kB)
[ 0.000000] .data : 0xc059e000 - 0xc05cd588 ( 190 kB)
[ 0.000000] .bss : 0xc05cd588 - 0xc0618f78 ( 303 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] mvebu_mbus: [Firmware Warn]: deprecated mbus-mvebu Device Tree, suspend/resume will not work
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 D prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 Coherent cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310 Coherent: CACHE_ID 0x410054c9, AUX_CTRL 0x56070001
[ 0.000000] Selected CPU frequency (16) unsupported
[ 0.000000] Switching to timer-based delay loop, resolution 40ns
[ 0.000002] sched_clock: 32 bits at 25MHz, resolution 40ns, wraps every 85899345900ns
[ 0.000008] clocksource: armada_370_xp_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 76450417870 ns
[ 0.000105] Calibrating local timer... 933.12MHz.
[ 0.060025] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=250000)
[ 0.060030] pid_max: default: 32768 minimum: 301
[ 0.060067] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.060071] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.060250] CPU: Testing write buffer coherency: ok
[ 0.060338] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.060348] Setting up static identity map for 0x8280 - 0x82d8
[ 0.060409] mvebu-soc-id: MVEBU SoC ID=0x6820, Rev=0x4
[ 0.060469] mvebu-pmsu: Initializing Power Management Service Unit
[ 0.060791] Booting CPU 1
[ 0.060942] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.060965] Brought up 2 CPUs
[ 0.060970] SMP: Total of 2 processors activated (100.00 BogoMIPS).
[ 0.060973] CPU: All CPU(s) started in SVC mode.
[ 0.062614] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.062663] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.062669] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.062703] pinctrl core: initialized pinctrl subsystem
[ 0.063024] NET: Registered protocol family 16
[ 0.063456] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.090033] cpuidle: using governor ladder
[ 0.092211] mvebu-pmsu: CPU hotplug support is currently broken on Armada 38x: disabling
[ 0.092218] mvebu-pmsu: CPU idle is currently broken on Armada 38x: disabling
[ 0.120478] reg-fixed-voltage xhci0-vbus: could not find pctldev for node /soc/internal-regs/pinctrl@18000/xhci0-vbus-pins, deferring probe
[ 0.120612] SCSI subsystem initialized
[ 0.120770] usbcore: registered new interface driver usbfs
[ 0.120795] usbcore: registered new interface driver hub
[ 0.120814] usbcore: registered new device driver usb
[ 0.121251] clocksource: Switched to clocksource armada_370_xp_clocksource
[ 0.121577] NET: Registered protocol family 2
[ 0.121789] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.121808] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.121835] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.121857] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.121867] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.121921] NET: Registered protocol family 1
[ 0.122950] Crashlog allocated RAM at address 0x3f00000
[ 0.125215] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.125220] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.126064] io scheduler noop registered
[ 0.126068] io scheduler deadline registered (default)
[ 0.126398] armada-38x-pinctrl f1018000.pinctrl: registered pinctrl driver
[ 0.126661] irq: Cannot allocate irq_descs @ IRQ45, assuming pre-allocated
[ 0.126778] irq: Cannot allocate irq_descs @ IRQ77, assuming pre-allocated
[ 0.127033] mvebu-pcie soc:pcie-controller: PCI host bridge to bus 0000:00
[ 0.127040] pci_bus 0000:00: root bus resource [io 0x1000-0xfffff]
[ 0.127044] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[ 0.127048] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.127210] PCI: bus0: Fast back to back transfers disabled
[ 0.127216] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.127221] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 0.127422] PCI: bus1: Fast back to back transfers disabled
[ 0.127661] PCI: bus2: Fast back to back transfers disabled
[ 0.127712] pci 0000:00:01.0: BAR 8: assigned [mem 0xe0000000-0xe02fffff]
[ 0.127717] pci 0000:00:02.0: BAR 8: assigned [mem 0xe0400000-0xe06fffff]
[ 0.127723] pci 0000:01:00.0: BAR 0: assigned [mem 0xe0000000-0xe01fffff 64bit pref]
[ 0.127732] pci 0000:01:00.0: BAR 2: assigned [mem 0xe0200000-0xe02fffff 64bit pref]
[ 0.127739] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.127745] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe02fffff]
[ 0.127751] pci 0000:02:00.0: BAR 0: assigned [mem 0xe0400000-0xe05fffff 64bit pref]
[ 0.127760] pci 0000:02:00.0: BAR 2: assigned [mem 0xe0600000-0xe06fffff 64bit pref]
[ 0.127768] pci 0000:00:02.0: PCI bridge to [bus 02]
[ 0.127772] pci 0000:00:02.0: bridge window [mem 0xe0400000-0xe06fffff]
[ 0.127851] mv_xor f1060800.xor: Marvell shared XOR driver
[ 0.161639] mv_xor f1060800.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.161721] mv_xor f1060900.xor: Marvell shared XOR driver
[ 0.201639] mv_xor f1060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
[ 0.201761] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
[ 0.202539] console [ttyS0] disabled
[ 0.222601] f1012000.serial: ttyS0 at MMIO 0xf1012000 (irq = 21, base_baud = 12500000) is a 16550A
[ 0.949910] console [ttyS0] enabled
[ 0.955279] loop: module loaded
[ 0.958643] ahci-mvebu f10a8000.sata: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl platform mode
[ 0.967741] ahci-mvebu f10a8000.sata: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 0.977090] scsi host0: ahci-mvebu
[ 0.980640] scsi host1: ahci-mvebu
[ 0.984141] ata1: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x100 irq 41
[ 0.992098] ata2: SATA max UDMA/133 mmio [mem 0xf10a8000-0xf10a9fff] port 0x180 irq 41
[ 1.000378] pxa3xx-nand f10d0000.flash: This platform can't do DMA on this device
[ 1.008131] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xda
[ 1.014521] nand: Unknown W29N02GV
[ 1.017936] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 1.025541] pxa3xx-nand f10d0000.flash: ECC strength 1, ECC step size 512
[ 1.032528] Bad block table found at page 131008, version 0x01
[ 1.038686] Bad block table found at page 130944, version 0x01
[ 1.044789] 11 ofpart partitions found on MTD device pxa3xx_nand-0
[ 1.050993] Creating 11 MTD partitions on "pxa3xx_nand-0":
[ 1.056508] 0x000000000000-0x000000200000 : "u-boot"
[ 1.061767] 0x000000200000-0x000000220000 : "u_env"
[ 1.066897] 0x000000220000-0x000000260000 : "s_env"
[ 1.072033] 0x0000007e0000-0x000000820000 : "devinfo"
[ 1.077337] 0x000000820000-0x000000a00000 : "sysdiag"
[ 1.082644] 0x000000a00000-0x000005a00000 : "kernel1"
[ 1.087972] 0x000001000000-0x000005a00000 : "ubi"
[ 1.092962] 0x000005a00000-0x00000aa00000 : "kernel2"
[ 1.098285] 0x000006000000-0x00000aa00000 : "rootfs2"
[ 1.103622] 0x00000aa00000-0x000010000000 : "syscfg"
[ 1.108863] 0x000000260000-0x000000820000 : "unused_area"
[ 1.114895] libphy: Fixed MDIO Bus: probed
[ 1.119127] libphy: orion_mdio_bus: probed
[ 1.123376] mvneta_bm f10c8000.bm: Buffer Manager for network controller enabled
[ 1.132067] mvneta f1034000.ethernet eth0: Using hardware mac address 60:38:e0:cd:1e:70
[ 1.141076] mvneta f1070000.ethernet eth1: Using hardware mac address 60:38:e0:cd:1e:70
[ 1.149167] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.155726] ehci-pci: EHCI PCI platform driver
[ 1.160212] ehci-platform: EHCI generic platform driver
[ 1.165534] ehci-orion: EHCI orion driver
[ 1.169618] orion-ehci f1058000.usb: EHCI Host Controller
[ 1.175053] orion-ehci f1058000.usb: new USB bus registered, assigned bus number 1
[ 1.182707] orion-ehci f1058000.usb: irq 36, io mem 0xf1058000
[ 1.201251] orion-ehci f1058000.usb: USB 2.0 started, EHCI 1.00
[ 1.207402] hub 1-0:1.0: USB hub found
[ 1.211177] hub 1-0:1.0: 1 port detected
[ 1.215431] usbcore: registered new interface driver usb-storage
[ 1.221593] armada38x-rtc f10a3800.rtc: rtc core: registered f10a3800.rtc as rtc0
[ 1.229211] i2c /dev entries driver
[ 1.244102] orion_wdt: Initial timeout 171 sec
[ 1.248678] sdhci: Secure Digital Host Controller Interface driver
[ 1.254889] sdhci: Copyright(c) Pierre Ossman
[ 1.259436] sdhci-pxav3 f10d8000.sdhci: No vmmc regulator found
[ 1.265387] sdhci-pxav3 f10d8000.sdhci: No vqmmc regulator found
[ 1.311280] mmc0: SDHCI controller on f10d8000.sdhci [f10d8000.sdhci] using ADMA
[ 1.318788] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.327836] marvell-cesa f1090000.crypto: CESA device successfully registered
[ 1.335479] NET: Registered protocol family 10
[ 1.340348] NET: Registered protocol family 17
[ 1.344838] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.351263] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.351285] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.368339] 8021q: 802.1Q VLAN Support v1.8
[ 1.372593] Registering SWP/SWPB emulation handler
[ 1.378081] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 1.383437] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 2
[ 1.391042] xhci-hcd f10f8000.usb3: hcc params 0x0a000990 hci version 0x100 quirks 0x00010010
[ 1.399622] xhci-hcd f10f8000.usb3: irq 44, io mem 0xf10f8000
[ 1.405676] hub 2-0:1.0: USB hub found
[ 1.409472] hub 2-0:1.0: 1 port detected
[ 1.413564] xhci-hcd f10f8000.usb3: xHCI Host Controller
[ 1.418903] xhci-hcd f10f8000.usb3: new USB bus registered, assigned bus number 3
[ 1.426451] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.434786] hub 3-0:1.0: USB hub found
[ 1.438574] hub 3-0:1.0: 1 port detected
[ 1.440464] mmc0: new high speed SDIO card at address 0001
[ 1.448329] UBI: auto-attach mtd6
[ 1.451491] ubi0: attaching mtd6
[ 1.455142] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 0:0, read only 64 bytes, retry
[ 1.466476] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 0:0, read only 64 bytes, retry
[ 1.477815] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 0:0, read only 64 bytes, retry
[ 1.489145] ubi0 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 0:0, read 64 bytes
[ 1.499114] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.92 #0
[ 1.505055] Hardware name: Marvell Armada 380/385 (Device Tree)
[ 1.511001] Function entered at [<c0027d48>] from [<c002446c>]
[ 1.516855] Function entered at [<c002446c>] from [<c02191d8>]
[ 1.522710] Function entered at [<c02191d8>] from [<c02f8354>]
[ 1.528564] Function entered at [<c02f8354>] from [<c02f8690>]
[ 1.534418] Function entered at [<c02f8690>] from [<c02fcf90>]
[ 1.540272] Function entered at [<c02fcf90>] from [<c02f254c>]
[ 1.546127] Function entered at [<c02f254c>] from [<c057327c>]
[ 1.551982] Function entered at [<c057327c>] from [<c001bbd4>]
[ 1.557837] Function entered at [<c001bbd4>] from [<c055be2c>]
[ 1.563691] Function entered at [<c055be2c>] from [<c0016640>]
[ 1.569544] Function entered at [<c0016640>] from [<c0009d38>]
[ 1.575560] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 0:2048, read only 2048 bytes, retry
[ 1.587502] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 0:2048, read only 2048 bytes, retry
[ 1.599442] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 0:2048, read only 2048 bytes, retry
[ 1.611381] ubi0 error: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 0:2048, read 2048 bytes
[ 1.621951] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.92 #0
[ 1.627893] Hardware name: Marvell Armada 380/385 (Device Tree)
[ 1.633835] Function entered at [<c0027d48>] from [<c002446c>]
[ 1.639689] Function entered at [<c002446c>] from [<c02191d8>]
[ 1.645544] Function entered at [<c02191d8>] from [<c02f8354>]
[ 1.651397] Function entered at [<c02f8354>] from [<c02f8898>]
[ 1.657252] Function entered at [<c02f8898>] from [<c02fd17c>]
[ 1.663106] Function entered at [<c02fd17c>] from [<c02f254c>]
[ 1.668960] Function entered at [<c02f254c>] from [<c057327c>]
[ 1.674814] Function entered at [<c057327c>] from [<c001bbd4>]
[ 1.680668] Function entered at [<c001bbd4>] from [<c055be2c>]
[ 1.686522] Function entered at [<c055be2c>] from [<c0016640>]
[ 1.692377] Function entered at [<c0016640>] from [<c0009d38>]
[ 1.698392] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 1:0, read only 64 bytes, retry
[ 1.709722] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 1:0, read only 64 bytes, retry
[ 1.721050] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 1:0, read only 64 bytes, retry
[ 1.732378] ubi0 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 1:0, read 64 bytes
[ 1.742338] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.92 #0
[ 1.748279] Hardware name: Marvell Armada 380/385 (Device Tree)
[ 1.754221] Function entered at [<c0027d48>] from [<c002446c>]
[ 1.760075] Function entered at [<c002446c>] from [<c02191d8>]
[ 1.765929] Function entered at [<c02191d8>] from [<c02f8354>]
[ 1.771783] Function entered at [<c02f8354>] from [<c02f8690>]
[ 1.777637] Function entered at [<c02f8690>] from [<c02fcf90>]
[ 1.783491] Function entered at [<c02fcf90>] from [<c02f254c>]
[ 1.789345] Function entered at [<c02f254c>] from [<c057327c>]
[ 1.795200] Function entered at [<c057327c>] from [<c001bbd4>]
[ 1.801053] Function entered at [<c001bbd4>] from [<c055be2c>]
[ 1.806908] Function entered at [<c055be2c>] from [<c0016640>]
[ 1.812762] Function entered at [<c0016640>] from [<c0009d38>]
[ 1.818772] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 1:2048, read only 2048 bytes, retry
[ 1.830710] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 1:2048, read only 2048 bytes, retry
[ 1.842650] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 1:2048, read only 2048 bytes, retry
[ 1.854588] ubi0 error: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 1:2048, read 2048 bytes
[ 1.865156] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.92 #0
[ 1.871097] Hardware name: Marvell Armada 380/385 (Device Tree)
[ 1.877039] Function entered at [<c0027d48>] from [<c002446c>]
[ 1.882893] Function entered at [<c002446c>] from [<c02191d8>]
[ 1.888747] Function entered at [<c02191d8>] from [<c02f8354>]
[ 1.894602] Function entered at [<c02f8354>] from [<c02f8898>]
[ 1.900456] Function entered at [<c02f8898>] from [<c02fd17c>]
[ 1.906310] Function entered at [<c02fd17c>] from [<c02f254c>]
[ 1.912163] Function entered at [<c02f254c>] from [<c057327c>]
[ 1.918018] Function entered at [<c057327c>] from [<c001bbd4>]
[ 1.923872] Function entered at [<c001bbd4>] from [<c055be2c>]
[ 1.929726] Function entered at [<c055be2c>] from [<c0016640>]
[ 1.935581] Function entered at [<c0016640>] from [<c0009d38>]
[ 1.941592] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 2:0, read only 64 bytes, retry
[ 1.952921] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 2:0, read only 64 bytes, retry
[ 1.964248] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 2:0, read only 64 bytes, retry
[ 1.975576] ubi0 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 2:0, read 64 bytes
[ 1.985534] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.92 #0
[ 1.991475] Hardware name: Marvell Armada 380/385 (Device Tree)
[ 1.997417] Function entered at [<c0027d48>] from [<c002446c>]
[ 2.003271] Function entered at [<c002446c>] from [<c02191d8>]
[ 2.009126] Function entered at [<c02191d8>] from [<c02f8354>]
[ 2.014980] Function entered at [<c02f8354>] from [<c02f8690>]
[ 2.020834] Function entered at [<c02f8690>] from [<c02fcf90>]
[ 2.026688] Function entered at [<c02fcf90>] from [<c02f254c>]
[ 2.032542] Function entered at [<c02f254c>] from [<c057327c>]
[ 2.038396] Function entered at [<c057327c>] from [<c001bbd4>]
[ 2.044250] Function entered at [<c001bbd4>] from [<c055be2c>]
[ 2.050104] Function entered at [<c055be2c>] from [<c0016640>]
[ 2.055958] Function entered at [<c0016640>] from [<c0009d38>]
[ 2.061972] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 2:2048, read only 2048 bytes, retry
[ 2.073914] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 2:2048, read only 2048 bytes, retry
[ 2.085853] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 2:2048, read only 2048 bytes, retry
[ 2.097792] ubi0 error: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 2:2048, read 2048 bytes
[ 2.108361] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.92 #0
[ 2.114303] Hardware name: Marvell Armada 380/385 (Device Tree)
[ 2.120244] Function entered at [<c0027d48>] from [<c002446c>]
[ 2.126099] Function entered at [<c002446c>] from [<c02191d8>]
[ 2.131952] Function entered at [<c02191d8>] from [<c02f8354>]
[ 2.137806] Function entered at [<c02f8354>] from [<c02f8898>]
[ 2.143659] Function entered at [<c02f8898>] from [<c02fd17c>]
[ 2.149513] Function entered at [<c02fd17c>] from [<c02f254c>]
[ 2.155367] Function entered at [<c02f254c>] from [<c057327c>]
[ 2.161221] Function entered at [<c057327c>] from [<c001bbd4>]
[ 2.167075] Function entered at [<c001bbd4>] from [<c055be2c>]
[ 2.172929] Function entered at [<c055be2c>] from [<c0016640>]
[ 2.178782] Function entered at [<c0016640>] from [<c0009d38>]
[ 2.184793] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 3:0, read only 64 bytes, retry
[ 2.196121] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 3:0, read only 64 bytes, retry
[ 2.207450] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 3:0, read only 64 bytes, retry
[ 2.218778] ubi0 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 3:0, read 64 bytes
[ 2.228736] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.92 #0
[ 2.234677] Hardware name: Marvell Armada 380/385 (Device Tree)
[ 2.240620] Function entered at [<c0027d48>] from [<c002446c>]
[ 2.246474] Function entered at [<c002446c>] from [<c02191d8>]
[ 2.252328] Function entered at [<c02191d8>] from [<c02f8354>]
[ 2.258182] Function entered at [<c02f8354>] from [<c02f8690>]
[ 2.264036] Function entered at [<c02f8690>] from [<c02fcf90>]
[ 2.269890] Function entered at [<c02fcf90>] from [<c02f254c>]
[ 2.275744] Function entered at [<c02f254c>] from [<c057327c>]
[ 2.281598] Function entered at [<c057327c>] from [<c001bbd4>]
[ 2.287452] Function entered at [<c001bbd4>] from [<c055be2c>]
[ 2.293306] Function entered at [<c055be2c>] from [<c0016640>]
[ 2.299160] Function entered at [<c0016640>] from [<c0009d38>]
[ 2.305169] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 3:2048, read only 2048 bytes, retry
[ 2.317107] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 3:2048, read only 2048 bytes, retry
[ 2.329046] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 3:2048, read only 2048 bytes, retry
[ 2.340986] ubi0 error: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 3:2048, read 2048 bytes
[ 2.351554] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.92 #0
[ 2.357496] Hardware name: Marvell Armada 380/385 (Device Tree)
[ 2.363438] Function entered at [<c0027d48>] from [<c002446c>]
[ 2.369291] Function entered at [<c002446c>] from [<c02191d8>]
[ 2.375145] Function entered at [<c02191d8>] from [<c02f8354>]
[ 2.380999] Function entered at [<c02f8354>] from [<c02f8898>]
[ 2.386853] Function entered at [<c02f8898>] from [<c02fd17c>]
[ 2.392707] Function entered at [<c02fd17c>] from [<c02f254c>]
[ 2.398562] Function entered at [<c02f254c>] from [<c057327c>]
[ 2.404416] Function entered at [<c057327c>] from [<c001bbd4>]
[ 2.410270] Function entered at [<c001bbd4>] from [<c055be2c>]
[ 2.416124] Function entered at [<c055be2c>] from [<c0016640>]
[ 2.421978] Function entered at [<c0016640>] from [<c0009d38>]
[ 2.427989] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 4:0, read only 64 bytes, retry
[ 2.439318] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 4:0, read only 64 bytes, retry
[ 2.450647] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 4:0, read only 64 bytes, retry
[ 2.461977] ubi0 error: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 4:0, read 64 bytes
[ 2.471935] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.92 #0
[ 2.477875] Hardware name: Marvell Armada 380/385 (Device Tree)
[ 2.483818] Function entered at [<c0027d48>] from [<c002446c>]
[ 2.489672] Function entered at [<c002446c>] from [<c02191d8>]
[ 2.495527] Function entered at [<c02191d8>] from [<c02f8354>]
[ 2.501380] Function entered at [<c02f8354>] from [<c02f8690>]
[ 2.507235] Function entered at [<c02f8690>] from [<c02fcf90>]
[ 2.513088] Function entered at [<c02fcf90>] from [<c02f254c>]
[ 2.518942] Function entered at [<c02f254c>] from [<c057327c>]
[ 2.524796] Function entered at [<c057327c>] from [<c001bbd4>]
[ 2.530650] Function entered at [<c001bbd4>] from [<c055be2c>]
[ 2.536504] Function entered at [<c055be2c>] from [<c0016640>]
[ 2.542358] Function entered at [<c0016640>] from [<c0009d38>]
[ 2.548367] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 4:2048, read only 2048 bytes, retry
[ 2.560306] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 4:2048, read only 2048 bytes, retry
[ 2.572245] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 4:2048, read only 2048 bytes, retry
[ 2.584183] ubi0 error: ubi_io_read: error -74 (ECC error) while reading 2048 bytes from PEB 4:2048, read 2048 bytes
[ 2.594754] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.4.92 #0
[ 2.600695] Hardware name: Marvell Armada 380/385 (Device Tree)
[ 2.606637] Function entered at [<c0027d48>] from [<c002446c>]
[ 2.612491] Function entered at [<c002446c>] from [<c02191d8>]
[ 2.618345] Function entered at [<c02191d8>] from [<c02f8354>]
[ 2.624199] Function entered at [<c02f8354>] from [<c02f8898>]
[ 2.630052] Function entered at [<c02f8898>] from [<c02fd17c>]
[ 2.635906] Function entered at [<c02fd17c>] from [<c02f254c>]
[ 2.641760] Function entered at [<c02f254c>] from [<c057327c>]
[ 2.647614] Function entered at [<c057327c>] from [<c001bbd4>]
[ 2.653469] Function entered at [<c001bbd4>] from [<c055be2c>]
[ 2.659323] Function entered at [<c055be2c>] from [<c0016640>]
[ 2.665178] Function entered at [<c0016640>] from [<c0009d38>]
[ 2.671188] ubi0 warning: ubi_io_read: error -74 (ECC error) while reading 64 bytes from PEB 5:0, read only 64 bytes, retry
etc, etc....