Unable to boot OpenWrt from sd card


I downloaded a few firmware both snapshots and releases for BeagleBone Black. And I have been unable to boot OpenWrt from the sd card.
I have followed the process for BBB by pressing the usr button before powering on and I have tried with other debian images and it works fine. However, I just cannot get it to work with OpenWrt.
Could someone please help me resolve this?


Check what's going on on the serial console.

1 Like

Thanks AndrewZ for the pointer.
I bought a JTAG UART device and connected via serial port, and it was looking for dtb beaglebone black and my device is a beaglebone green, after I renamed it, it is booting now.

My next goal is to flash the eMMC storage. I'll start another thread about it.

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.