mihov80
December 11, 2025, 7:53pm
1
help, I need a bootloader or a full dump for Netgear XR500.
U-Boot 2012.07-g6dc1a32 [local,local] (Nov 10 2017 - 10:19:25)
U-boot 2012.07 dni1 V0.2 for DNI HW ID: 29764958 NOR flash 0MB; NAND flash 256MB; RAM 512MB; 1st Radio 4x4; 2nd Radio 4x4;
Cascade
smem ram ptable found: ver: 0 len: 5
DRAM: 491 MiB
NAND: SF: Unsupported manufacturer 00
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0) 256 MiB
MMC:
PCI0 Link Intialized
PCI1 Link Intialized
In: serial
Out: serial
Err: serial
thanks to everyone who helps
brada4
December 11, 2025, 8:01pm
2
Quite absurd asking for bootloader and showing the picture of bootloader booting.
What problem you are trying to solve?
mihov80
December 11, 2025, 8:12pm
3
help, I need a bootloader or a full dump for Netgear XR500.
U-Boot 2012.07-g6dc1a32 [local,local] (Nov 10 2017 - 10:19:25)
U-boot 2012.07 dni1 V0.2 for DNI HW ID: 29764958 NOR flash 0MB; NAND flash 256MB; RAM 512MB; 1st Radio 4x4; 2nd Radio 4x4;
Cascade
smem ram ptable found: ver: 0 len: 5
DRAM: 491 MiB
NAND: SF: Unsupported manufacturer 00
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0) 256 MiB
MMC:
PCI0 Link Intialized
PCI1 Link Intialized
In: serial
Out: serial
Err: serial
its mx30uf2g18ac xq1 flash is damaged and i want to restore the router.
log is before it was corrupted
thanks to everyone who helps
mihov80
December 11, 2025, 8:16pm
4
its mx30uf2g18ac xq1 flash is damaged and i want to restore the router.
log is before it was corrupted
brada4
December 11, 2025, 8:17pm
5
It rejects your soldered flash. Ask netger for bootloader source, it is not made here.
Lucky1
December 12, 2025, 10:07pm
6
mihov80
December 12, 2025, 10:51pm
7
Thank you, but it seems that XR500.mtd0.qcadata.bin does not contain the bootloader, only the calibration data partition. Do you have the full dump for the device?
Lucky1
December 12, 2025, 11:11pm
8
No that would be the ART partition
and there is no point having my board calibration info
if you have lost both copies of yours, then scrap the wifi on that board
here is the 2nd one http://luckys.onmypc.net/openwrt/XR500/XR500.mtd1.APPSBL.bin