U-boot configurations for VoCore2

Hello,I am Working finding right configurations for VoCore2.Can Someone provide me the Configurations
Cross Compiler Path: "/opt/buildroot-gcc342/bin" x x
x x --- x x
x x (115200) UART baudrate x x
x x (MT7628) Chip ID x x
x x [ ] Use 50MHz SPI clock x x
x x (DDR2) DRAM Type x x
x x (512Mb) DDR Component x x
x x (16bits) DDR Width x x
x x --- x x
x x [ ] Tiny Uboot x x
x x (ROM) Ram/Rom version x x
x x (CPLL) CPU clock source x x
x x (1) Fractional divider for clock source (0x1~0xA) x x
x x [*] USB Recovery x x
x x [ ] ETH One Port Only x x
x x [ ] Partition LAN/WAN x x
x x [ ] Enable all Ethernet PHY x x
x x --- GPIO pins (-1 mean unused) x x
x x (-1) BTN Reset GPIO x x
x x (-1) BTN WPS GPIO x x
x x (-1) BTN Misc #1 GPIO x x
x x (-1) BTN Misc #2 GPIO x x
x x [ ] LED Pins Inverted x x
x x (-1) LED All GPIO x x
x x (-1) LED Init1 GPIO x x
x x (-1) LED Init2 GPIO x x
x x (-1) LED Init3 GPIO x x
x x (-1) LED Init4 GPIO x x
x x (-1) LED Init5 GPIO x x
x x (-1) LED Init6 GPIO x x
x x (-1) LED Init7 GPIO x x
x x (-1) LED Init8 GPIO x x
x x (-1) LED Alert1 GPIO x x
x x (-1) LED Alert2 GPIO x x
x x (-1) LED Alert3 GPIO x x
x x (-1) LED Alert4 GPIO x x
x x (-1) LED Power GPIO x x
x x (-1) USB #1 5V Power GPIO x x
x x (-1) USB #2 5V Power GPIO x x
Which options among them i need to enable.

We do not provide support for proprietary SDKs. Contact your vendor for that.

According to their website there is github repo, check that it may help.
There is a uboot config file vocore2_defconfig there.

@Borromini point stands of course, you'll get more help from the vendor.