I have tried to flash version 24.10.0 to TUF-AX6000.
And use the unofficial TRX images method.
There is no problem to flash rtx initramfs image. Everything goes well.
I have used the "openwrt-24_tuf-ax6000-initramfs.trx" file.
No problem to access the Luci web interface, and set up the PPPOE smoothly.
But for initramfs image, it could not save changes as you know.
So I tried to upgrade to official 24.10.0, then troubles come.
I don't know which step was wrong.
Maybe I have downloaded a wrong upgrade image?
I have downloaded "openwrt-mediatek-filogic-asus_tuf-ax6000-squashfs-sysupgrade.bin", maybe it's a snapshot version? so makes the trouble?
If so which version should I use?
Following one?
"openwrt-24.10.0-mediatek-filogic-asus_tuf-ax6000-squashfs-sysupgrade.bin"?
Or it has nothing to do with the version I take? maybe the u-boot version is wrong?
maybe the u-boot version is not 2022.04-rc1?
but I'm not able to check the u-boot version, since I have not connect to serial console.
I just wondering why rtx initramfs version could work, but official ".bin" version could not.
It's version issue or u-boot issue normally?