Trying Upgrade AX3600 from snapshot r0-ae1f348 to stable 24

Installing and Using OpenWrt
1

Hello,

I'm trying to upgrade my Xiaomi AX3600, currently running the OpenWrt snapshot build (r0-ae1f348 by robimarko), to the stable 24 release.

Here are the current device details:

Model Xiaomi AX3600
Architecture ARMv8 Processor rev 4
Target Platform ipq807x/generic
Firmware Version OpenWrt SNAPSHOT r0-ae1f348
Kernel Version 5.15.76

Could you please advise on the correct procedure for upgrading to the stable version?

Thank you!

2
3

I have tried updating the firmware both through the web interface and via SSH, using the forced installation option without keeping configuration files. However, after rebooting, the router remains in its previous configuration. The flash is located on mtd13. I received a different message when attempting to upgrade to the latest version by robimarko — see the attached screenshot.

I would like to move to the current stable release and exit the snapshot builds.

1d119ce7-79e8-4137-b47a-0f023b7d3bdb
1d119ce7-79e8-4137-b47a-0f023b7d3bdb707×830 108 KB

4

Does not sound like an official build...

2 Likes
5

It was before official support actually

6

Have you been @ https://openwrt.org/toh/xiaomi/ax3600?

7

Yes i have tried force upgrade cli (ssh), the ax3600 reboot and don't update.

8

well, the info page you posted does say it has to be done through an initramfs ...

so it's either serial, or try https://openwrt.org/toh/xiaomi/ax3600#install_the_firmware
if it goes side ways, you'll need serial to recover.