Trying to add support for the tplink RE655v2

[Mijzelf]

@MartinS

LZMA ERROR 1 - must RESET board

Support for TP-LINK TL-WR802N V4

Ok, so, finally, I managed to put openwrt in there. SUCCESS. 0x80100000 was exactly the place it were putting the data, in ram; problem is this data (the initramfs) was being overwritten by the uncompressed initramfs during boot, resulting in the LZMA ERROR 1. Asking tftpboot to move it later in the ram memory first (I took 0x80100000 + 12*1000*1000 = 0x80C71B00 as a base address), then booting from this address gives a functional openwrt. MT7628 # tftpboot 0x80C71B00 …