Travelmate does not connect

gultacutre · August 6, 2020, 11:39pm

I set up travelmate using the default config and the luci interface.
I have removed the ssid and mac addresses below.
I use 19.07.3.
The errors I get are:

Thu Aug 6 22:51:49 2020 user.debug travelmate-1.5.4[19093]: f_main ::: faulty station 'radio1/ssid/00:00:00:00:00:00' - continue
Thu Aug 6 22:43:53 2020 user.info travelmate-1.5.4[19093]: can't connect to uplink 'radio1/ssid/00:00:00:00:00:00' (4/5, GL.iNet GL-AR750, OpenWrt 19.07.3 r11063-85e04e9f46)

My wireless:


config wifi-device 'radio0'
	option type 'mac80211'
	option channel '36'
	option hwmode '11a'
	option path 'pci0000:00/0000:00:00.0'
	option htmode 'VHT80'
	option txpower '20'
	option txpower_max '20'
	option band '5G'

config wifi-iface 'default_radio0'
	option device 'radio0'
	option network 'lan'
	option mode 'ap'
	option encryption 'psk2'
	option ifname 'wlan0'
	option wds '1'
	option key 'key'
	option ssid '2gssid'
	option isolate '1'

config wifi-device 'radio1'
	option type 'mac80211'
	option hwmode '11g'
	option path 'platform/qca953x_wmac'
	option channel '6'
	option htmode 'HT40'
	option noscan '1'
	option txpower '20'
	option txpower_max '20'
	option band '2G'

config wifi-iface 'default_radio1'
	option device 'radio1'
	option network 'lan'
	option mode 'ap'
	option encryption 'psk2'
	option wds '1'
	option ifname 'wlan1'
	option key 'key'
	option ssid 'myssid0'
	option isolate '1'

config wifi-iface 'guest5g'
	option device 'radio0'
	option network 'guest'
	option mode 'ap'
	option wds '1'
	option ssid 'Guest-5G'
	option encryption 'psk2'
	option key 'key'
	option ifname 'wlan2'
	option disabled '1'
	option guest '1'

config wifi-iface 'guest2g'
	option device 'radio1'
	option network 'guest'
	option mode 'ap'
	option wds '1'
	option ssid 'Guest'
	option encryption 'psk2'
	option key 'key'
	option ifname 'wlan3'
	option disabled '1'
	option guest '1'

config wifi-iface 'wifinet4'
	option wds '1'
	option ssid 'myssid'
	option encryption 'psk2'
	option device 'radio1'
	option mode 'ap'
	option network 'lan'
	option key 'key'

config wifi-iface 'radio1_ssid0'
	option network 'trm_wwan'
	option disabled '1'
	option device 'radio1'
	option mode 'sta'
	option bssid '00:00:00:00:00:00'
	option ssid 'ssid0'
	option key 'key'
	option encryption 'psk2'

config wifi-iface 'radio1_ssid'
	option network 'trm_wwan'
	option disabled '1'
	option device 'radio1'
	option mode 'sta'
	option bssid '00:00:00:00:00:00'
	option ssid 'ssid'
	option key 'key'
	option encryption 'psk2'

Firewall:

config defaults
	option input 'ACCEPT'
	option output 'ACCEPT'
	option forward 'REJECT'
	option synflood_protect '1'

config zone
	option name 'lan'
	option input 'ACCEPT'
	option output 'ACCEPT'
	option forward 'ACCEPT'
	option network 'lan'

config zone
	option name 'wan'
	option input 'REJECT'
	option output 'ACCEPT'
	option forward 'REJECT'
	option masq '1'
	option mtu_fix '1'
	list device 'tun0'
	option network 'wan wan6 wwan trm_wwan'

config rule
	option name 'Allow-DHCP-Renew'
	option src 'wan'
	option proto 'udp'
	option dest_port '68'
	option target 'ACCEPT'
	option family 'ipv4'

config rule
	option name 'Allow-Ping'
	option src 'wan'
	option proto 'icmp'
	option icmp_type 'echo-request'
	option family 'ipv4'
	option target 'ACCEPT'

config rule
	option name 'Allow-IGMP'
	option src 'wan'
	option proto 'igmp'
	option family 'ipv4'
	option target 'ACCEPT'

config rule
	option name 'Allow-DHCPv6'
	option src 'wan'
	option proto 'udp'
	option src_ip 'fc00::/6'
	option dest_ip 'fc00::/6'
	option dest_port '546'
	option family 'ipv6'
	option target 'ACCEPT'

config rule
	option name 'Allow-MLD'
	option src 'wan'
	option proto 'icmp'
	option src_ip 'fe80::/10'
	list icmp_type '130/0'
	list icmp_type '131/0'
	list icmp_type '132/0'
	list icmp_type '143/0'
	option family 'ipv6'
	option target 'ACCEPT'

config rule
	option name 'Allow-ICMPv6-Input'
	option src 'wan'
	option proto 'icmp'
	list icmp_type 'echo-request'
	list icmp_type 'echo-reply'
	list icmp_type 'destination-unreachable'
	list icmp_type 'packet-too-big'
	list icmp_type 'time-exceeded'
	list icmp_type 'bad-header'
	list icmp_type 'unknown-header-type'
	list icmp_type 'router-solicitation'
	list icmp_type 'neighbour-solicitation'
	list icmp_type 'router-advertisement'
	list icmp_type 'neighbour-advertisement'
	option limit '1000/sec'
	option family 'ipv6'
	option target 'ACCEPT'

config rule
	option name 'Allow-ICMPv6-Forward'
	option src 'wan'
	option dest '*'
	option proto 'icmp'
	list icmp_type 'echo-request'
	list icmp_type 'echo-reply'
	list icmp_type 'destination-unreachable'
	list icmp_type 'packet-too-big'
	list icmp_type 'time-exceeded'
	list icmp_type 'bad-header'
	list icmp_type 'unknown-header-type'
	option limit '1000/sec'
	option family 'ipv6'
	option target 'ACCEPT'

config rule
	option name 'Allow-IPSec-ESP'
	option src 'wan'
	option dest 'lan'
	option proto 'esp'
	option target 'ACCEPT'

config rule
	option name 'Allow-ISAKMP'
	option src 'wan'
	option dest 'lan'
	option dest_port '500'
	option proto 'udp'
	option target 'ACCEPT'

config include
	option path '/etc/firewall.user'
	option reload '1'

config include 'gls2s'
	option type 'script'
	option path '/var/etc/gls2s.include'
	option reload '1'

config include 'glfw'
	option type 'script'
	option path '/usr/bin/glfw.sh'
	option reload '1'

config include 'glqos'
	option type 'script'
	option path '/usr/sbin/glqos.sh'
	option reload '1'

config include 'mwan3'
	option type 'script'
	option path '/var/etc/mwan3.include'
	option reload '1'

config zone 'guestzone'
	option name 'guestzone'
	option network 'guest'
	option forward 'REJECT'
	option output 'ACCEPT'
	option input 'REJECT'

config forwarding 'guestzone_fwd'
	option src 'guestzone'
	option dest 'wan'

config rule 'guestzone_dhcp'
	option name 'guestzone_DHCP'
	option src 'guestzone'
	option target 'ACCEPT'
	option proto 'udp'
	option dest_port '67-68'

config rule 'guestzone_dns'
	option name 'guestzone_DNS'
	option src 'guestzone'
	option target 'ACCEPT'
	option proto 'tcp udp'
	option dest_port '53'

config rule 'glservice_rule'
	option name 'glservice'
	option dest_port '83'
	option proto 'tcp udp'
	option src 'wan'
	option target 'ACCEPT'
	option enabled '0'

config zone 'vpn'
	option name 'vpn'
	option input 'REJECT'
	option output 'ACCEPT'
	option forward 'REJECT'
	option masq '1'
	option mtu_fix '1'
	list device 'tun0'
	option network 'vpn'

config forwarding 'lan_vpn'
	option src 'lan'
	option dest 'vpn'

Network:

config interface 'loopback'
	option ifname 'lo'
	option proto 'static'
	option ipaddr '127.0.0.1'
	option netmask '255.0.0.0'

config globals 'globals'
	option ula_prefix 'fcbb:329c:7c00::/48'

config interface 'lan'
	option type 'bridge'
	option ifname 'eth1.1'
	option proto 'static'
	option netmask '255.255.255.0'
	option ip6assign '60'
	option hostname 'hostname'
	option ipaddr '192.168.8.1'

config interface 'wan'
	option ifname 'eth0'
	option proto 'dhcp'
	option hostname 'hostname'
	option peerdns '0'
	option dns '9.9.9.10 208.67.222.222'

config interface 'wan6'
	option ifname 'eth0'
	option proto 'dhcpv6'

config switch
	option name 'switch0'
	option reset '1'
	option enable_vlan '1'

config switch_vlan
	option device 'switch0'
	option vlan '1'
	option ports '1 2 0t'

config interface 'guest'
	option ifname 'guest'
	option type 'bridge'
	option proto 'static'
	option ipaddr '192.168.9.1'
	option netmask '255.255.255.0'
	option ip6assign '60'

config interface 'wwan'
	option proto 'dhcp'

config interface 'trm_wwan'
	option proto 'dhcp'

I use a VPN kill switch, but I don't think the issue is related.
I can't connect to any wifi network through travelmate. How do I fix this?

dibdot · August 7, 2020, 1:45pm

Sorry, I can't reproduce your issues. Same router, same os (19.07.3)...however it's plain vanilla: without vpn, without guest networks, without unknown wireless 'tweaks' like

Maybe you should start with save/common defaults, e.g. 'HT20' ... and maybe it's worth a try to connect directly with LuCI (without Travelmate) to doublecheck that it works in principle.

gultacutre · August 7, 2020, 6:33pm

I have factory reset it and cleaned the files. Now everything works. Thank you for this amazing software.

system · August 17, 2020, 6:33pm

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.