I installed OpenWRT MR6400 v5 firmware, but nothing worked after reboot. So I backed the official firmware. I want to ask for a specific firmware for this version
V5.3 should use v5 image, define "nothing".
I tried it several times, but after installing and rebooting, nothing works, just the power light is on. I already tried this custom version https://gist.github.com/Kyuunex/b6eb17969ff9a3a36aec3cafc432bad4, but the result was equal
That is for one month you did not notice your PC has static ip and is not acquiring dhcp?
That is the default - wifi is off, modem is not configured.
Looks like a successful flash, from where I'm standing.
Do you mean juat set the static ip in wondows network will solve the problem?
But I cannot open luci or ssh. What should I set for static ip address?
Just set dhcp in windows because tftp server was 192.168.0.X
1 Like
But dhcp doesn't work and just power and LAN lights are on
Saw the pic, wan port is up/connected, nothing else.
user guide:
Check panel layout, flying burger is internet icon, lan looks like tvset
Do you mean back to official? Doesn't have any solution to use openwrt on it?
Are you using OpenWrt? Minute ago you bragged about some knockoff?
Use one if 3 ports marked LAN, present lights say it is connected to wired wan port.