TP link wr840n v5 bootloop

Hello, i have just flashed my TL-WR840N V5 {EU} after that i flash the stock firmware via web ui, and i finally brick it. Now my router light is blinking. Try to installed via TFTP and not working its fully download firmware but after flash its starts blinking again. Is there any other ways to bring back my router without soldering ?

I use this bin openwrt-18.06.2-ramips-mt76x8-tl-wr840n-v5-squashfs-sysupgrade
official oem firmware from tp link web page for recovery

#I used wereshark for bellow information:
}Router Ip address :192.168.0.66
}getway :192.168.0.2
}tftp file request name : tp_recovery.bin

Router info::}
Model : TL-WR840N
Bootloader :U-Boot
CPU :MediaTek MT7628N
CPU MHz :580
Flash MB :4
RAM MB :64
Switch :MediaTek MT7628N

I downloaded the open wrt from :https://openwrt.org/toh/hwdata/tp-link/tp-link_tl-wr840n_v5
Is there any way to fix it.
Thnx in advance

Hi, did you manage to fix it, I have the same issue