TP-Link VR200 Installation

Hello guys,

I want to install to my router Openwrt
so I asked TP-Link what my router specification. They answered me as

Dear Customer,
Thank you very much for your email requesting information about TP-Link product.

Upon checking and searching the Ram amount of the VR200 is 128MiB while the Flash is 16MiB.

Thank you.
Have a nice day.
You may get help quickly by contacting our 24 hours LiveChat service: https://www.tp-link.com/support/contact-technical-support/#LiveChat-Support

Your feedback is very important to us, please feel free to contact us for further help.

Best Regards

But I glanced list of routers, My router model does not exist.
I tried execute from orginal GPL code but I run across some lack of .sh file whatever

How can I install open wrt to my router. Could you help?

If it's not listed in the ToH, it's not supported yet and you can't install OpenWrt on it.

That doesn't mean it won't be possible to develop the necessary port for it (the hardware should be mostly supportable, except for its 2.4 GHz WLAN card!), but that's a different story and would be up to you.

From the VR200v devicepage https://openwrt.org/toh/tp-link/vr200v :

The VR200v image also works on the VR200

Edit: I just noticed that we have a dedicated OpenWrt image for the VR200, and therefore I have created a dataentry for this device and added it to the VR200v devicepage.

Thank
I already tun off 2.4 band :slight_smile:

Yeah, I noticed VR200v version. I am going to try.
I curious what happens.

Thanks