Hey,
i'm using TL-WR1043ND v4.0 with LEDE (17.01.4) as gateway.
I've got disconnects very often - ethernet connection is going off although wifi connection remains ok.
Note i did tried placing different router, namely cisco linksys with openwrt - problem does not appear, and even same second model of WR1043 (lede aswell) - in this case there is the same problem.
So far, i've tried modyfing init.d script like mentioned here:
https://dev.openwrt.org/ticket/12472
and modifying MTU for no avail.
Here is syslog: http://dpaste.com/23M2VA8
If you need any more logs/configs, just ask. Please help
You might find some hints in this thread...
Hi *,
I used to have the following problem like many others in the community (source: No PPPoE connection ) with my Telekom VDSL50 internet connection:
daemon.warn pppd[2652]: Timeout waiting for PADO packets
daemon.err pppd[2652]: Unable to complete PPPoE Discovery
And, I looked up every possible page, but couldn't find any problem with my "/etc/config/network" file on the TD-W8970 with LEDE 17.01.2 (r3435-65eec8bd5f):
config interface 'loopback'
option ifname 'lo'
option proto 'static'
o…
mk24
December 24, 2017, 8:42pm
3
It appears that nothing at all is happening on the connection. This could be:
Router ppoe Ethernet port not connected to the modem.
A VLAN is required on the router to modem Ethernet, and is not set up.
Modem is not in bridge mode.
Modem not connected to the DSL line or problem at phone company end.
Previous connection not hung up (turn modem off for several minutes).
lucize
December 24, 2017, 8:49pm
4
I recently started using this version and I experience the same drop if I do some type of upload, especially speedtest website. after the pppoe disconnect only a reboot will solve the problem, didn't encounter the problem on static(dhcp) wan connection
the v3 version is working flawlessly
there is a ticket about this too
https://bugs.lede-project.org/index.php?do=details&task_id=762
lucize
December 24, 2017, 9:02pm
5
just made a new build with
https://patchwork.ozlabs.org/patch/743498/
https://patchwork.ozlabs.org/patch/845962/
https://patchwork.ozlabs.org/patch/852079/
and some patches from nbd's staging related to ar and I could run multiple sessions of speed test without crash
it remains to be seen how stables is in time
Im not using any filters nor any telephones are plugged in.
mk24:
It appears that nothing at all is happening on the connection. This could be:
Router ppoe Ethernet port not connected to the modem.
A VLAN is required on the router to modem Ethernet, and is not set up.
Modem is not in bridge mode.
Modem not connected to the DSL line or problem at phone company end.
Previous connection not hung up (turn modem off for several minutes).
Next time connection is down i will attach kernel log (read somewhere that such log was critical). Anyway could you help with troubleshooting please?
Here is my /etc/config/network: http://dpaste.com/2S6ZZDZ
/etc/config/dhcp: http://dpaste.com/0M4903N
The workaround script(s) jwoods provided is working nice - i no longer need to manually restart router, but issue still persists.
Script(s):
Hi *,
I used to have the following problem like many others in the community (source: No PPPoE connection ) with my Telekom VDSL50 internet connection:
daemon.warn pppd[2652]: Timeout waiting for PADO packets
daemon.err pppd[2652]: Unable to complete PPPoE Discovery
And, I looked up every possible page, but couldn't find any problem with my "/etc/config/network" file on the TD-W8970 with LEDE 17.01.2 (r3435-65eec8bd5f):
config interface 'loopback'
option ifname 'lo'
option proto 'static'
o…
lucize
December 26, 2017, 12:15pm
8
did you tried a build with the patches I pointed ?
I have 14:13:06 up 1 day, 15:20, load average: 0.16, 0.07, 0.01
and
pppoe-wan Link encap:Point-to-Point Protocol
RX bytes:24655770902 (22.9 GiB) TX bytes:13886783379 (12.9 GiB)
wlan0 Link encap:Ethernet HWaddr 84:16:F9:66:xx:xx
RX bytes:15524783783 (14.4 GiB) TX bytes:9701443188 (9.0 GiB)
Regards
No, because frankly - I don't even have idea where to start
lucize
December 26, 2017, 2:39pm
10
I uploaded an image TL-WR1043ND-v4 https://drive.google.com/open?id=1Ml1E6RLOzlLRmhEn3LSl0I4iTbdq5D0d but it contains some packages that are not found in the standrad image, like acme,dnsmasq-full, mwan3, nano, mc, fwknopd, htop. curl, kmod-fast-classifier
so if you don't mind those, you can try it
If there will be no other option i will try Yours custom image (though i don't know exact source of problem and can't fix it - problem looks somewhat trivial for me).
On a sidenote, when disconnect happens there are no additional events logged to kernel log.
lucize
December 26, 2017, 8:22pm
12
Installed and using this firmware. Will report stability after couple days.
Any ETA on 17.01.5?
edit 1 (day 1): packets sent=23568, received=23568, lost=0, latency min=0ms max=21ms avg=0ms
edit 2 (day 2): packets sent=15400, received=15398, lost=2, latency min=0ms max=20ms avg=0ms
Looks stable, good work!
Thank You