TP-Link RE205 V3 dump of radio (art) partition needed

Hardware Questions and Recommendations
1

Can anyone send me a dump of the radio partition of TP-Link RE205 V3?

If openwrt is installed simply goto System/Backup and download the radio mtd block.

Or with ssh like this:

cd /www
dd if=/dev/mtd6 of=art.bin

Goto web page of RE205 for download:
192.168.1.1/art.bin

Or a complete dump of the spi flash will also be fine.

Thank you very much

2

The art partition is unique to each device. It contains factory calibration data from your specific unit, including radio calibration data, MAC addresses, and other such data.

Using the art partition data from another device will cause issues insofar as your device will be out of spec since that (unique) calibration data is required to ensure proper operation (this could even result in operating beyond the allowances for regulatory compliance).

If your ART partition is lost, wifi on that device should be considered dead (forever).

3

This topic was automatically closed after 2 hours. New replies are no longer allowed.