TP-Link MR3020 v3 build problems


#108

uinstall all php7 from default repo.
change your repo from snapshot to releases 17.01
example: http://downloads.lede-project.org/releases/packages-17.01/mipsel_24kc/base
install php7 from this repo
have fun :grin:


#109

Hi,

I'm trying to compile an image for MR3020 v3, but failed so far.

I've chosen the base system, target profile and subtarget per your suggestion. Yet after make I cannot see factory.bin in bin directory. Only upgrade.bin.

Normally, with MR3020 v1's image, if factory.bin is not there it's because the package size is more than the ROM size (~4Mb). That's why I've deleted many packages, including opkg, luci, tc, ipset and many more, but still no success.

What should I try next?


#110

make V=s to capture "full" output -- don't add any -jN flag so that it is single-threaded or things won't make much sense.


#111

I'm using make V=s actually. Unfortunately though, nothing seems wrong from the output.


#112

This fork of openwrt by meyerguru for V3 can be compiled only in sysupgrade.bin and tftp-recovery.bin format. You cant upgrade from basic tplink software to openwrt. Only way is to use tftp-recovery.bin and tftpd32 soft. After you can upgrade by using sysupgrade if you need.


#113

MR3020v3 + Luci + block-mount + usb storage - Ipv6. Compiled from meyergru fork


#114

Snapshot support for TL-MR3020 v3 has been added:
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=6bbb2202551be394fead2efd99eb946f846fc63d


#115

Did anyone managed to find how to control USB port power on this device? On v1 it was possible through GPIO #8, but on this one none of 96 GPIO's seems to be realted to USB port power.


#116

Hello, I have tried this with no luck.. All LEDs are flashing repeatedly and continuously..

Then I tried "stripped original firmware" from here, but again it didn't work.

Any other options that I should look into?


#117

I expirience weak wifi signal and connection loss on multiple v3 devices when connected as a wifi-client.


#118

I'm having the same problems. Have you found any kind of solution for this?


#119

To everyone here having issues, please

  1. TFTP OpenWRT (See instructions and warnings ITT above) over the TP-Link firmware
  2. Then upgrade to the latest OpenWRT snapshot using Luci - https://openwrt.org/toh/hwdata/tp-link/tp-link_tl-mr3020_v3

Everything works fine for me on - http://downloads.openwrt.org/snapshots/targets/ramips/mt76x8/openwrt-ramips-mt76x8-tplink_tl-mr3020-v3-squashfs-sysupgrade.bin


#120

Hi Dmitry Chigiryov,

You can use the following script to control the USB port power:

for port in /dev/ttyUSB*
do
     echo -ne "AT+CFUN=1,1\n\r" > $port
     if [ $? ==0 ]; then
         break
     fi
done

#121

Hello everyone.
I managed to install pulpstone-tplink_tl-mr3020-v3-squashfs-tftp-recovery-rev2.bin at my mr3020-v3
Now, I need to custom a build with some files and packages
With mr3020-v1.9, instead of compiling the firmware, I did it using ImageBuilder
Does anyone have made ImageBuilder for this pulpstone firmware ?
thanks