TP-Link CPE510 v3 not supported

[mk24]

There are CPE210v3 builds in the ath79 snapshots. I don't know if they also work on the 510. It could be that only the radio hardware is different.

[tmomas]

@mk24

There are CPE210v3 builds in the ath79 snapshots. I don't know if they also work on the 510.

CPE510 v3 images are available -> http://downloads.openwrt.org/snapshots/targets/ath79/generic/

[Pilot6]

@mircot80

I can't download it, I'll try again later.

Try from github

git clone https://github.com/openwrt/openwrt.git

[mircot80]

@Pilot6

Try from github

Yes, this works

but there is no cpe510 v3

[mircot80]

@tmomas

CPE510 v3 images are available -> http://downloads.openwrt.org/snapshots/targets/ath79/generic/

well, it works perfectly.
thank you.

[Pilot6]

@mircot80

but there is no cpe510 v3

Which branch and target are you using?

[Pilot6]

You are trying ar71xx instead of ath79.

[mircot80]

Target System: Atheros AR7xxx/AR9xxx
Subtarget: Generic
Target Profile: there is only CPE510/520 v1 as in the photo, no v2, no v3

[Pilot6]

Target should be ath79.

[mircot80]

you are right!